Reviews
Recommended for those who focus on volume.
First of all, it is very difficult to tighten the Silencer bracket with the CharcoalCanister without removing the entire footpeg set.
To install the footpeg without removing the entire footpeg set, a palm-sized Small Type Swivel Ratchet can be used.
It may be for people who have a little bit of work sukill
I used to use BEAMS, so this is a comparison with BEAMS, but the good thing about BEAMS compared to BEAMS is that the baffle can be removed and it looks cooler (laughs).
If you remove the Baffle, it will sound like a stupid explosion.
It's all over the place and you can't make any progress at all.
I bought this because the BEAMS Exhaust System was too Large, but I returned to BEAMS after about a month,
If you are thinking of buying a new one, I recommend you to go for MORIWAKI for a little more than 10,000 yen!
View detail
Rod Silencer Exhaust System installed on MOTRA
The exhaust pipe of MOTRA's OEM exhaust system was rusted and broken, so I selected this exhaust system made by WILLS WIN from among the external exhaust systems. It is made of AllStainless and the goodness of the cost performance which can be bought at 10,000 yen was the decisive factor of purchase. I thought the appearance was quite good. The exhaust sound is not too loud and the exhaust pipe of MOTRA's OEM exhaust system was too thin and the maximum speed was only 55km/h. But after replacing it with this exhaust system, 60km/h is now possible. But after replacing it with this Exhaust System, 60km/h is now possible. (I have a Class 2 motorized vehicle registration.) The exhaust pipe near the Mount Bracket was cracked by vibration. I can give up because of the price. It might be because of the vibration of my engine. It is necessary to take measures against vibration. Please be responsible for your own use of this product. View detail
The seat lock is hard, but overall I am satisfied.
We are 168cm 66kg with short legs and bought a new PCX160.
I knew I was on my toes at the time of the test drive, so I decided to buy it.
The product was not in stock at the time of order and took one month to be delivered.
The good:I feel like I'm 2cm lower, if not 3cm.
Satisfied that Helmet storage space is the same as standard Seat as described in ManufacturerSite.
Bad point:the rear is floating about 2 cm before applying Seat lock, but the lock is engaged by pushing hard.
I checked with the Manufacturer to be sure, but they said it is only a special order and that is normal.
Seat is still thin and buttocks are somewhat sore.
Overall, I recommend it because it holds Helmet storage space and improves the footing!
View detail
just right
I like it very much.
The sound is just right (my opinion) and comfortable.
View detail
Water intrusion
I asked my favorite Motorcycle shop about this Air cleaner, but be careful because depending on the angle of the rain, water may enter the Engine!
and ad vise!
It looks like there was actually a Case that broke down because of it.
It would be nice if it didn't rain where you park, but be careful.
If possible, I would like to see Manufacturer take measures in this area!
I'm happy with it for normal running.
View detail
It looks nice and neat, but you won't be able to bring it into an authorized Dealer.
Installation was somewhat difficult and the Instruction Manual was confusing.
The angle of the License Plate Holder is adjustable, but of course it is mounted at the proper angle.
However, the fact that it is installed with an adjustable angle in the first place is itself a Color:They are going to be in a Gray state. (From authorized Dealer, Engineering Dept.)
After I installed it, I filled the hex Screw holes with Pate and modified them so that they are not adjustable.
I would not recommend this to anyone who wants to bring it to a dealer for repair, etc., because it will be a problem if you have to remove it after installation.
However, it is a recommendation for those who do not care about the appearance of the Rear Area, and for those who install it at an appropriate angle.
View detail
Not sure how to install the item please help
Picture 2 (from winrus) that was also poorly printed and added to the package show the valve been mounted with the wire ring and round edge towards the engine. The other (user) pictures show the white ring the other way around. with the white part facing the other way. View detail
Fits: SUZUKI GRASS TRACKER Big Boy, SUZUKI GRASS TRACKER
It may not be enough for those who like a large sound.
It is a fairly quiet Exhaust System.
I thought about removing the baffle, but it looks like it's built-in and welded on, so I decided against it….
Good thing it's a neighborhood friendly Exhaust System sound. ( ´ ▽ ` )
View detail
I think it is a good product.
Easy to install, stable, good product. View detail
Installation requires modification.
As shown in the product image, the OEM Carrier cannot be attached to the Flat, but the DoubleCarrier is attached on top, so it cannot be used in combination with the Second seat.
Even when not used in combination, the OEM Carrier interferes with the system, so modification was required to install the system.
View detail
Fits: YAMAHA BirdCity125
WirusWin WideTreadKit for registration of light motorcycle with side wheel
I think the tread is wider, so I feel more ground contact, but the tires are on the outside, so if you ride as usual, you may rub the wheel on the side of the road, so I think it is better not to go through the road. View detail
Parenthesis OK
I bought this for my CUB. The style of installation is good! However, the top speed is down and the sound is too quiet. I think it's best for slow city driving, but not for touring etc... View detail
Fits: HONDA CT125・CT110 HUNTER CUB, HONDA CT125, Hunter Cub
Damaged!
It was a very nice product, but after a few months of use, the L-shaped part got a crack and was put in storage....
A little more strength would be nice.
View detail
The crying point is that it cannot be disassembled and maintained.
After about a year of installation, I removed it, sprayed it with Parts cleaner and cleaned the inside, but it no longer felt one way like it did when it was new, so I changed it to a certain something-rev. This is cheap and seems to be a replacement item. View detail
Fits: HONDA byte, HONDA byte, HONDA byte, HONDA ZOOMER(Ruckus), HONDA ZOOMER(Ruckus), HONDA ZOOMER(Ruckus)
Easier to run.
Installed on Byte. The work took less than 10 minutes.
The engine noise became quieter and acceleration smoother, and although the difference was minimal for a 50cc engine, the effect was clearly noticeable.
Although the engine braking is weakened due to the structure, it is not so much that it is dangerous, but rather that the feeling of falling forward due to the Axeloff is reduced, making it easier to ride.
I would highly recommend it to all ZOOMER drivers who share the same vehicle body.
View detail
reduction embrasure
I purchased UniversalValve and installed it on my GSXR125.
I didn't have the dedicated Valve in stock and the price was a little lower than I would have liked?
Valve side is too thin for the inside diameter of the Hose, so it is too gubby! I tightened the Hose with in-hemp palm, but it came out easily, so I changed my strategy. I used a hose for air venting, but it was too thin to fit into the valve side, so I cut the hose into a C shape and inserted it into the valve side. Cut the Hose to fit the Valve side. This is the only way to prevent the gap between the Valve and the Hose. I inserted the Hose there and fixed it with a double layer of in-hemp palmock. I will use the Band in the Home center to set the quantity.:2pc. Set purchased, cost about 600 yen. 。 As a future project, I plan to make the gap-filling Hose black-colored and oil-resistant, but it is more expensive than the transparent Hose, so I should have bought a dedicated one (laugh).
I think that the Sprocket is set to Acceleration, so I think that it is now the NORMAL embellishment.
Response is getting better.
I will be spraying parts cleaner periodically as it seems to slow down the valve movement.
I will remove it when it gets colder, as it seems that the Valve can freeze in the winter due to condensation.
View detail
Parenthesis is better
I installed it myself and had no difficulty in doing so.
As for my impression of the product, the Silver has improved the parenthesis, and since the Exhaust System was also changed, I have the impression that the Torque has become thicker.
It was quite a powerful and good Customization.
View detail
Mounting orientation
I installed it on my VOX.
Engine braking reduction cannot be experienced unless the speed is fast.
When the Axel is returned, the effect of engine braking is weakened.
There seems to be an improvement in fuel economy, but I have not experienced it yet.
Startability is better.
Installation can only be done by removing the cowl, but the tool is large and sturdy, using only a Phillips screwdriver.
View detail
No neighborhood nuisance
The OEMExhaust System has been dented since I bought the Motorcycle used.
I've always been concerned about it, and this time I decided to change the Exhaust System anyway.
Slash Cut Exhaust System is our main goal to customize.
I had ordered it, but had to wait 4 months for an undecided delivery date.
The dented exhaust system is about to start rusting and it is finally starting to look bad.
Slash Cut Exhaust System is a product of Cancellation and Kochira.
I chose it.
I really wanted to change the entire exhaust system, but decided against it.
This product arrived quickly and I changed it as soon as it arrived.
Gasket also came with it, which was helpful.
However, if you force the assembly, the Gasket will be torn to pieces.
I think it will be.
I inserted the Gasket in the back, shifting it little by little.
As for the sound, there were 2Patterns and neither had any complaints.
But if I didn't turn on the Baffle, the sound would echo in the neighborhood.
I put on Baffle.
Still, I was very pleased with the satisfactory sound and appearance.
View detail
LITTLE CUB WirusWin WirusWin Rod Silencer Exhaust System
Idling sound is good with crisp and not too low bass. The volume is about the same as the exhaust system. When you turn it up, the sound is more high pitched for a CUB. It sounds like a common moped?
Considering the price, I think it is perfect.
[How is it used?
I wanted to add some color as a replacement for the rotten Normal muffler.
Was the one you received as per Image?
The quality of the Stainless Steel was better than Image with good welds and a nice finish.
Was the installation difficult?
Small type, completely bolt-on, no interference at all.
How was your experience with it?
Idling sound is good. When you turn it, you can hear the sound of gold, which is typical of Stainless Steel. No strange vibration and safe to ride.
[Included Parts:were they on?
One Washer, Emblem and Sticker
[Was there anything that disappointed you?
I had expected it to be quiet, but I chose it after reading some reviews that said it was quiet, but as expected, the sound is considerably more loud than OEM, and I was concerned about the Level at night in a residential area.
[ITEMS TO BUY TOGETHER
Let's just buy Gasket.
View detail