Reviews
It's Exactly because it's dedicated.
It's a little disappointing to see it from the back because it's a little far away from the car body. View detail
![Mono Lock Case [E43NTL-ADV]](https://img.webike-cdn.net/catalogue/images/32552/95342_01_TS.jpg)
Installation requires ingenuity.
The included Mono-lockUniversalWIDEBase did not fit the DL1000 V-STROM800DE Carrier, so I purchased a ZBracket from a DIY store and installed it.
But I am satisfied with the firm fixation and the capacity.
View detail
Fits: Others , YAMAHA SEROW250, YAMAHA TMAX500, YAMAHA RZ250R, TRIUMPH TRIDENT 660, YAMAHA MT-09, SUZUKI RF900, SUZUKI GSXS1000F, SUZUKI GSX-S750, SUZUKI GSX1100S KATANA, SUZUKI GSX-S1000, SUZUKI B-KING, SUZUKI GSX-R750, KAWASAKI zephyrχ, KAWASAKI NINJA 1000 (Z1000SX), KAWASAKI ninja250, KAWASAKI ZX-9R, KAWASAKI ZX-6R, KAWASAKI ZEPHYR400χ, KAWASAKI ZRX1200
easy to use
It is more than enough Size for a night or two!
Size can be expanded to accommodate souvenirs.
I think it's the right size for GSX-8S Smallish Seat.
If you are concerned about the flutter of the Belt, Mini Field Seat BagEX would be a better choice.
View detail
![[Repair Parts] Universal Base Repair Parts](https://img.webike-cdn.net/catalogue/images/129441/31335_TS.jpg)
GIVI UniversalBase
When I use the Scooter with the box, it is a hassle to remove the Base, so I bought GIVI's UniversalBase.
I am satisfied with both the quality and the price.
View detail
Fits: HONDA CB1300SUPER FOUR SP, HONDA NC750X, HONDA CB650R, HONDA CBR650R, HONDA CB1000R, HONDA CB1300SUPER FOUR, HONDA CB1300SUPER BOLD'OR SP, HONDA CB1300SUPER BOLD'OR, KAWASAKI ZEPHYR1100, YAMAHA MT-09, Others , KAWASAKI NINJA 250 ABS, SUZUKI V STROM250SX
Sufficient capacity, easy to use
[How is it used?
I switched my car to a Neo Kura series, and the Seat bag I had been using was no longer a good fit. I also had trouble with the lack of capacity and the shape of the bag, so I had to replace it with a new one.
It is used for day-touring with more personal effects or planned souvenir purchases.
Was the one you received as per Image?
I had checked the actual bag at the store, so it was just as I had imagined. I knew that the product was not bad as I am currently using Henry beguine's overnight Seat bag DH-742.
How was your experience with it?
Compared to the 5L capacity triangular shaped SS Tail cowl that I have been using, the capacity before expansion is 7L, which is not much different, but the rectangular shape allows space to be used without wasting space, and much more things can be stored. If you expand it further, the capacity becomes 12L, which is perfect for a day trip.
In terms of design, it does not have a white face, but on the contrary, it does not have a strange self-assertiveness, and it fits any kind of motorbike.
[Points to note]
One regrettable point is that the buckle for fixing the bag is stuck to the bag body, unlike the DH-742.
Therefore, it is quite difficult to adjust the length of the fixed Belt in advance and try to fit the Buckle.
I wouldn't mind if the length of the Belt was adjusted each time it was used, but that would take time to put on and would be less convenient.
How did it compare to other products?
We could not find any other products with features such as Simple appearance that fits well with Neoclassicals, normally Compact and expandable capacity as needed, and Reasonable price.
I like the fact that we have matching touring bags from the same manufacturer.
Other items that would be helpful
Opinions and requests to Manufacturer:.
I would like the fixed Belt to the Seat (especially the Buckle) to be consistent with other Henry beguine products.
DH-742 is a Belt to fix to Loading Hook, etc., but the buckle is the opposite of TAB and receptacle on the front side and the back side, and the size is also slightly different.
It cannot be diverted to DH-722. User who already has the company's Bag if it is unified.
It would be good to expand the range of installation methods.
View detail
![Rear Box [B32NB]](https://img.webike-cdn.net/catalogue/images/75563/16965_TS.jpg)
Lackage Space addition
It was installed as a complement to the ADV160 Trunk, along with the addition of a Rear Carrier.
After all, it is a motorcycle that chooses the helmets to accommodate,
The 32L MODEL was selected in consideration of wind resistance.
It can hold 1 pc. of helmet, 1 rain jacket, and 1 pair of gloves.
Auto-lock type, so the key is left in the box with the key inserted to prevent the key from being locked in the box.
Open and close the door.
Touring requires that you carry a duplicate key.
View detail
Fits: HONDA CROSS CUB50, HONDA SUPER CUB 50, HONDA SUPER CUB110, HONDA CROSSCUB110
You should definitely loosen the Suspension as well.
Required Tools (reference)
5mm hexagon
10mmSocket
12mmSocket
14mmSocket
14Spanner
good point
Side bag is firmly attached.
A bad point
The instructions that came with it were not very helpful…?
The weight is heavy. (It can't be helped.)
I think it is very sturdy as a Side Support, even when I filled the side bag with water and somewhat heavy Japanese sake, it didn't give me any trouble.
I also used it to attach the Seat bag and had no concerns when pulling it upward.
When installing, you should definitely loosen the upper part of the Rear suspension.
The OEMRear Carrier rests on the upper part of the Rear suspension and the two Bolt points on the Tail lamp side, for a total of four points.
The instruction manual says to loosen only the Tail lamp side, but due to the structure of the Side Support inserted under the OEM Rear Carrier, the Rear Suspension must also be loosened or else the Rear Carrier will be raised up and the holes will not fit.
View detail
Fits: Others Hepco & Becker Side case Explorer/Journey/Junior/Gobi
Securely mounted.
Firmly and Pannier can be worn.
However, I think the price is too high.
View detail
The product is good, but the accuracy is not good enough.
The product itself seems firmly and sturdy and gives a sense of security, but we had the following problems in installing it.
When installing the new machine, even the screw holes were painted, so it was necessary to make a tap.
・Quantity:Pair (for Left and Right) The holes in the Parts connecting the Holder of the Bracket were not aligned with the Screw holes in the Bracket and needed to be corrected.
The mounting holes of the parts to which the blinker is attached are small, and the rubber part of the blinker is deformed, so it was necessary to widen the holes with a file.
Wiring had to be extended because the Blinker would have to be moved.
I asked PRO to install it for me.
Since it is quite expensive, I was expecting a good degree of accuracy.
View detail
It is easy to use
I used to use Rough&Road's WaterproofSide Back, but it was a pain to open and tighten, so I switched to this.
I like the simple design and the easy loading and unloading.
View detail
Weak rigidity of the bar
I installed it on my 2nd model MT09SP, but it is a large size because it interferes with the controller of the rear suspension. The bar is not rigid, so when the back is attached, it bends inward, so I have to check the interference with the tire every time I attach it. View detail
Fits: Others , HONDA CB1300SB, BMW F800, HONDA CB400F, HONDA NC700X, KAWASAKI Ninja1000, KAWASAKI Ninja400, KAWASAKI ZX-14R, YAMAHA MT-07, YAMAHA YZF-R25
SEROWTour Shell Case 2
Well thought out for ease of use. The sides are Material:The plastic material makes it look like a hard case, which is also a good design, and it is very nice because it is more compact when installed on the car body than a typical soft back. The inside is double-layered. This means that the outer fabric does not come in direct contact with the luggage, and it also has a splash-proof inner back to further protect the luggage. If you use the Rain Cover (sold separately), it will be safe even in the rain.
It is also great that the SIDE opening can be adjusted to open and close at different angles. If it is so good, it would be even better if the Case itself is Completely Waterproof.
View detail
Fits gsx-8s
Not in the compatibility chart but can be used for gsx-8s 23 MODEL. View detail
Fits: Others , YAMAHA MT-07, YAMAHA FZS1000 FAZER, YAMAHA FZ1FAZER, SUZUKI TEMPTER, SUZUKI DL1000 V-STROM1000, KAWASAKI ZX-12R, KAWASAKI ZRX400, KAWASAKI ZRX1000, KAWASAKI ER-6n, KAWASAKI ZEPHYR400χ, KAWASAKI BALIUS2, HONDA HORNET250, HONDA VTR250, HONDA CRF250L, HONDA CB400SF, HONDA CBR600RR, HONDA CB400SB, HONDA CB1300SB, HONDA CB1300SF
solid construction
I bought this for loading luggage when I go on an overnight touring trip in the future.. The Rain Cover is a nice addition.
By the way, ZrX1200 DAEG has a small amount of luggage space under the seat, and if I put on the seat bag, I have to bend my knees about 90-degrees when I straddle the bike, so I usually remove it.
View detail
![Monolock Case ANTARTICA Rear Box [B42N-ADV]](https://img.webike-cdn.net/catalogue/images/105397/22124_TS.jpg)
It can hold a lot.
I am satisfied with the size, appearance, and capacity, but I am concerned that the lid is difficult to close. View detail
Fits: Others , YAMAHA SEROW250, YAMAHA TMAX500, YAMAHA RZ250R, TRIUMPH TRIDENT 660, YAMAHA MT-09, SUZUKI RF900, SUZUKI GSXS1000F, SUZUKI GSX-S750, SUZUKI GSX1100S KATANA, SUZUKI GSX-S1000, SUZUKI B-KING, SUZUKI GSX-R750, KAWASAKI zephyrχ, KAWASAKI NINJA 1000 (Z1000SX), KAWASAKI ninja250, KAWASAKI ZX-9R, KAWASAKI ZX-6R, KAWASAKI ZEPHYR400χ, KAWASAKI ZRX1200
TANAX motofizz tanax Moto fizz Mini field sea
SeatBack is exhibited by various manufacturers, but the reason why we decided on TANAX is that it can be spread out again to increase the capacity, and the beverage folder can be used as a quantity:2pc. This is where the Set is attached. Plastic bottle is used on one side and empty can for ashtray on the other.
Also, about 2 days per night and Quantity:2pc. I think it's great because you can in-back when purchasing souvenirs up to about Set.
View detail
Exactly to Adventure
[How is it used?
I bought it for Camping and plugged in various things.
Was the one you received as per Image?
When it arrives, it is folded in all Roses, "Assemble from here...?" I was slightly surprised.
However, since an Instruction Manual is enclosed, I assembled it according to the instructions and, lo and behold, it turned out just as I had imagined.
How was your experience with it?
It has a moderate capacity of 65 liters, so I think the size is too large to be used for normal touring.
I used it for camping, so I packed a cot, tent, chair, change of clothes, etc., and it quickly became full....
It would be better to bundle other bulky items outside the Bag.
Two dividers are included, but they can be freely attached and detached, and the spacing between the dividers can be adjusted as much as desired.
However, this divider is fixed with Magic tape, so if you hook a garment (such as a Sweater), it will take the thread with it.
[Points to note]
RoseRoseRose & don't be BigRose as it arrives flat.
It is natural, but basically, give up on slipping through.
Point and hang of installation
Don't worry, it's super easy.
[Opinions and requests to Manufacturer
It will arrive in this condition. The image calledQuantity:1pc. is a great way to not have to Bigli lol.
View detail
Ideal for 1 night/2 days touring
I purchased this bag to go on a 2 day/1 night Touring trip. It looks and functions well, and the capacity is the perfect size for a 2-day/1-night touring. I am very satisfied with the bag, as I can expand the SIDE to hold my souvenirs on the way back home. It can be stably attached to the CarvingGelCase, also by Tanax, so there is no gapping. View detail
![Tank Lock [MT505]](https://img.webike-cdn.net/catalogue/images/27457/94562_TS.jpg)
The convenience of Tank Lock is retained, and it goes in rather well.
I had been using Tank Lock for a while, but ordered this because my Fastener broke.
The capacity is just right for a touring mapple, a glasses case, a memo pad, etc.
The only thing that bothered me was that when closing with the fastener, there was a buckle in the middle of the fastener that got stuck.
Why is there a Buckle in the middle?
It's strange
View detail
Perfect for triumphBONNEVILLE!
The quilting design with luster is perfect for TriumphBONNEVILLE. The height is short so it doesn't hit the exhaust system and is just the right size. The Side Back and SeatBack are large in capacity. It looks good anyway. View detail