Reviews
No rain at all. Maybe only Dry - -
Although it is in other Impression, braking performance drastically decreases in rainy weather.
It does not work as much as Big Li.
I have put up with it for a long time, but I can not do it anymore. limit.
I reverted to OEM.
It is characteristic of Organic Material.
Braking power does not start up when Pad and Rotor are wet.
Dragging the Brake dragging the moisture away considerably from the front.
Still I am bad at hand - -
Happy Brake - - I guess I have no idea..
Besides OEM, there is only this choice for a car model called TREET.
"Bridge until OEM is available" And "I only ride fine weather" Maybe there is.
It is a picture after about 3,500 km commuting.. (OEMPad new)
The remaining thickness is 5 mm.
I do not measure the initial thickness, I think that it is not reduced by Large.
It is such a way of use that goes by commuting and stops suddenly braking.
OEM was almost exhausted at about 5,500 km, so I think that Pad's Life is certainly long.
It is a feeling that Feel at sunny weather is as good or slightly as braking power as OEM.
It can be used without special discomfort.
View detail
Fits: HONDA DIO AF28, HONDA DIO AF27, HONDA DIO [Dio] AF28, HONDA DIO [Dio] AF27, HONDA DIO [Dio] AF28, HONDA DIO [Dio] AF27
It is Repeater. Seat's Refresh is Exactly.
Completion will rise considerably depending on ingenuity.
☆ Four items are Waterproof - I thought it would be nice to have some more fabric thickness.
- Rain may penetrate from the seam → Seat thinly paint Silicon sealant on the entire back side, Seat Urethane foam is pre-rice bag etc etc. We put it in a heavy plastic bag of a Completely Waterproof.
Hardness when sitting is covered with Urethane foam Poly bag etc. etc. I am adjusting with.
Urethane foam leakage measures are necessary, but there is no problem at all other than doing it.
Because the fabric is soft, the feeling of mouth is quite good. Even if it is thin it does not matter for durability.
Personally I think that it may be a bit thicker.
Please fasten Tucker exactly while pulling it.
It is glossy than OEM, but it is not enough.
View detail
Frequently Asked Other Company Product
I can use it normally, There is a stemmatic praise evaluation on a certain site, but it is normal to the last.
I use it for about 2 weeks, but I can use it normally.
If you do not set it for a very good acceleration, you can not cut it like any other company product ??
In my case I am Repair Parts of Normal setting so I'm not suddenly accelerating Gasoline food preparation so I will keep it there
View detail
No durability
Only 10,000 kilometers Belt went out and replaced with OEM.
Belt was shattered to 2-30 pieces.
After all, if the driving system is not OEM, it will be stranded in many ways.
View detail
Is it good for Setting?
Only for setting... Is it saying, I bought it for break-in running after Bore up. It is very low as it is a low price. I do not want to wear it after break-in running. Because it is unlikely to have durability... View detail
It was nice when it was NORMAL - - - -
Although I used to patronize for a while after Bore up - - - -
There is no problem if the town using middle low speed is Main, but I made a bore up and twisted the driving system slightly, but it was cut off at high speed twice.
It was a Pattern damaged at high speed after riding thousands of kilometers.
But I understood that the cause is predicted from that. (Maybe)
When driving at high speed Pulley? Etc. It seems that I wanted to go to the outside until I got to the outside but it touched the outer wall of the part covered and it was damaged by friction.
It was pretty much shattered.
It might be better if you made Bore up strengthen Belt - - - -
View detail
It is sufficient performance as OEM's Repair Parts.
I used it for CREA SCOOPY. Since there is no Stopper on the side of Roller, there is a concern that Weight of Gold genus in the center will come out, but it is probably Large durable. Since weight is written on Roller, it is saved without worry of mixing. There was also no error in the weight of each Roller. Because it is cheap, it seems to be easy to exchange as it decreases.
Also, it is safe to buy Roller with different weight in Setting, because it is cheap.
View detail
I purchased it as a backup.
I am using it now..
I am already using 3000 km, but there is nothing wrong.
We bought it because it was Sale target item at SpringCampaign of Big's.
I think I should exchange it after about 5000 km.
Until now, I have replaced various Manufacturer Belts, but this item is the best match.
Pulley and Driven are Chameleon factory and Roller uses six 16 g.
Engine is 156 cc, and we are exchanging with BigSlot and 20 percent Up Injector.
I am planning to visit this Belt in the future.
I'm looking forward to seeing you..
View detail
Filter made by Air Purifier
Intake air filter of the air cleaner made it for own production to stop production. Adhered two sheets of Filter, cut it according to the shape of the original Filter base, and glued. Since the eyes are slightly finer than the original Filter, garbage exchange is good. It is satisfactory that it can be repaired cheaply, although it is not purposeful.
View detail
MAJESTY 125 Air filter self-made
Filter of OEM Product does not have any problem, but it gets dirty soon so I created it by UniversalAir filter. Quantity : 1pc. In, Quantity : 1 Set of 4pcs. It is likely to make minutes. Because it just cuts according to the mold, you can make various. View detail
Air Filter homebrew
Air Filter for Across Due to own making, I bought it. OEM Product of Paper Base is also a good product, but when it got dirty, it was exchange compatible, so I made it for myself. Intake resistance seems to be small, I feel that the rise has improved slightly. Fuel consumption is now. View detail
Very good
I replaced the Oil Filter of SR 400. Even though the price is cheap, consumables such as O-Ring and Packing are also attached and I am very satisfied. I would like to use it next time as well. View detail
Fits: HONDA DIO AF34, HONDA DIO AF35, HONDA DIO [Dio] AF35, HONDA DIO [Dio] AF34, HONDA DIO [Dio] AF35, HONDA DIO [Dio] AF34
Satisfied
I replaced the Seat that was full of holes.
It is a place where taste is sharp and preference is divided, but I do not mind. Although it is natural, since it is folded and sent, if you actually stop at Seat with Tucker, the crease will be left. But I do not care.
View detail
Fits: YAMAHA JOG (3YK1-6), YAMAHA JOG (3YJ), YAMAHA AXIS 90 (3VR1-4), YAMAHA AXIS 90 (3VR7-9), YAMAHA AXIS 50 (3VP5), YAMAHA AXIS 50 (3VP6)
I can use it normally.
Since KN made Clutch is decreasing, I chose PFP for exchange.
KN made was not bad, I wanted to use a different Manufacturer's thing.
(Although it may be the same product)
Running 4000 kilometers, I am able to use it the same way as OEM or KN made without dissatisfaction especially ♪
View detail
Good for break-in!
I bought it for break-in after Bore up.
Weight Roller of PFP is cheap at Webike (Compared to other sites) So it is perfect for breaking up or after OH or Setting!
View detail
Good work
I liked this series and I bought Repeat many times.
Quantity : 1 Set of 6pcs. The price was cheap, and as for PFP Parts there were many good ones for cheap price.
Weight error is average 0 per 6. 05 g, it is not bad value.
Large Roller is nominal weight 0. There is an error of about 1 g, but with this PFP Roller the error is 0. It is excellent because it is around 5 g. Perfect for Setting.
As the nominal weight is printed on the surface, it is easy to distinguish GOOD. However, it disappears when used.
In my case, I apply colors by Magic by myself for each weight to make it easy to distinguish. Because it is hard to understand in the resin part of the surface, the inner METAL part is painted with Rotation of 5 to 6 colors close to the primary color. Since it is difficult to understand after all when Orange and painting with near color such as Red and Pink.
Installation is easy because it is Roller without direction designation.
Let's clean up inside the VARIE. Because of rubbish such as Belt kettle, Roller may cause uneven wear.
According to my rule of thumb, uneven wear of the Weight roller is caused by the material of Roller itself (Eventually price and Manufacturer) It is rare that it is caused by. In many cases the environment (The type of VARIERER and the structure of the entire drive system, or lubricating grease and Sludge) Is the cause.
KITACO - DAYTONA - Posh - Malossi - Polini - Others Various Made in Taiwan and made by Europe etc. , I tried various Roller, but the high price did not necessarily match with the high durability.
Even if you use high Roller and cheap Roller at the same time on the same VARIER, the higher one may be worn out first, and at the same Roller it is 30 kilometers and it has caused uneven wear and sometimes it exceeds 2000 kg.
If there is one thing in such a case, it means that the dirty driving system Roller is Large resistant wearing. Let's keep the drive system clean.
By the way, this 16 × 13 size Roller is Honda 50cc series PIAGGIO 50cc, Malossi's Multi-Variator (Pulley Kit) And OthersEurope type VARIERER.
View detail
Fits: YAMAHA XJR400R, YAMAHA FZR400RR 90-94, KAWASAKI ZZR1400, KAWASAKI ZXR, KAWASAKI ZX6R, KAWASAKI Z750, HONDA SUPER FOUR 92-96, HONDA VLX400, HONDA GL1500, HONDA CB400, HONDA CB1300SF, KAWASAKI XJR400R, HONDA CB400, HONDA VLX400, HONDA Super Fore 92-96, KAWASAKI XJR400R, KAWASAKI Z750, KAWASAKI ZX6R, KAWASAKI ZZR1400, YAMAHA FZR400RR 90-94
It may be cheap.
Actually, I do not know the good or bad of these products, no matter which one I use. So I think that cheaper is better as it is cheap. I was able to install normally, I think that after every Oil replacement, it should be replaced. In order to do that kind of thing, I think that cheaper is better as it is cheap.
View detail
Consumables are COSPA
We used Weight Roller of various Manufacturers at Maintenance of DIO, but none of them have chosen in COSPA because there is no difference in wearing period.
I built in and it runs, but I wonder if there is no difference from other things - - - I feel it..
How long will it have ??? so leave it as three stars.
View detail
SRX250F(51Y)
I bought it for SRX 250 but unfortunately 250 F (51Y) Packing of Large people is not attached to.
The accessory is Small.
It is probably thought that SRX 250 is also the 3rd for WP in the latter half. Small people and Filter could be used without problems.
View detail
Cost performance is the best!
ADDRESS V125 k6 is mounted on 156cc.
I exchanged GRONDEMENT's Belt 3500 km usage.
The feeling that I exchanged was that Bett was a bit thicker, so I started to get worse but the fastest way I feel like it is stretching.
When running at a constant speed, it has become quiet since 5,500 rpm to 5300 rpm.
Well, it does not change much, but if you change the Belt and clean up each part and Grease up, the Smoothness of the speed change will change considerably.
Since this Belt is cheap, I think that if you exchange and Grease up every 5000 km, you will be able to continue comfortable driving.
Strange Belt squeal etc etc. There was not.
View detail