Reviews
Mounting on GROM
Small but metaxis bright !!!!
I chose it with no other shape
It's perfect for diversion b
I am removing Case and using it
Recommendation is for those who failed in brightness.
View detail
Can be attached to Bw's 125 and satisfied with the operation
[Operation]
First we planned to buy the product of Daytona, but it is necessary to separately need an adapter when using front and rear LEDs. But, this worked fine with front and rear bulbs as well as one LED and all LEDs.
[Operating sound]
The sound is slightly Relay sound, but it is Level which is erased by Engine sound. Even if you are not using LEDs, you can hear the sound around the OEM Pushing Pushing If you want to lower the volume, we recommend you to replace it even if it is not an LED.
[Wearing]
If you like CYGNUS X or Bw 's 125, you can attach it with 3PHarness and you can easily mount it with a fixed Rubber. Because Harness and fixed Rubber are attached, I think that it is cheaper in Total than Made in China Cheap Relay.
View detail
High quality
Finished beautiful, quality is quite high.
This Gold amount, Mounting Bolt also comes with M5, M6 SUS Nabe Hexagon Bolt.
It's thin at M5, M6 is best because there is Wobble.
Since Nut is not attached, it is necessary to prepare it, but as the bag gets dropped when the direction is changed loosely, it fixed with loosening stop Nut.
I installed it in MAXAM, but it is practical and looks and ☆ 5.
View detail
To CYGNUS X
I attached it to SE44J. Originally it was incomplete Combination Nifrek It is inconvenient to put up 6 years, if you buy over 3,000 yen you bought it for nothing enough for 500 yen for free shipping. Parenthesis is good, it actually arrives and attached, & quite convenient. Pink is nice on the Black car body.
I'm sorry, Hook, I have to buy it. You should have put you first in the cart. That is a good item to say.
View detail
It is as expected
Visibility is very good because it is fairly compact, but it is solidly displayed. It is essential for vehicles that have Bore up and vehicles with other electrical systems. View detail
Fits: YAMAHA CYGNUS X, YAMAHA CYGNUS X, YAMAHA CYGNUS X, YAMAHA CYGNUS X, YAMAHA CYGNUS X, YAMAHA CYGNUS X, YAMAHA CYGNUS X
COSPA - Performance is very good.
Just swap with OEM. Very easy.
I installed a person with fine eyes, but still good dandruff!
At the same time we recommend exchanging Exhaust System!
Is it durable after that? What will happen with long-term use - - -.
View detail
Fits: YAMAHA BWS125(BWS), YAMAHA BWS125(BWS), YAMAHA BWS125(BWS)
It is different from the original oil temperature but it is convenient
My Kit has broken Connector part from the beginning and reworked the terminal himself, it is the same part of Made in Taiwan goods.
As a function to measure the temperature of the oil temperature of the head, actually to the temperature of the head Quantity : Pair (for Left and Right) As it is done, it is quite hot, unlike general oil temperature.
Immediately after stopping after running in summer, it may reach 150 degrees, but since the FI warning light does not light, it probably is not a problem temperature.
The oil temperature in Crankcase is also measured simultaneously by another Oil Temperature Gauge, but it is displayed as high as about 60 degrees at the maximum Large so even if it becomes a high temperature display it is Large durable even if it does not bother so much.
View detail
It is insurance..
I exchanged the Exhaust System with momentum and momentum, so I installed it on insurance at the same time. Length is also just fine, shorter than Tandem Footpeg and longer than Silencer. It is recommended ^ _ ^ View detail
It is easy to see
CYGNUS X Taiwan Spec. It attached to.
I installed it for voltage management with a car without Kick pedal, but at first I took Plus power from behind the Meter but because the voltage was displayed lower, I installed Relay from Battery and took Plus power from Relay.
Engine before starting 12. 6V
After starting the engine LightOFF 14. 2~14. 3V
With LightON 13. 8~13. 9V (HID 35 W & JapanSpeed ??enhanced Regulator included)
It is more convenient if it was easier to understand when Battery weakened.
By the way Body's Wiring is Quantity : It is thin at 2 pc and the connection is a one-touch coupler, but this coupler has many poor contacts so I think whether to connect with Bullet Terminal or Solder.
View detail
Easy installation and looks very clean, 5/5 stars because it is a simple design and works perfectly. Picture 1. shows first start up when turning key in the ignition to on- it lights up going across which has a cool look ^-^ Picture 2. general oper
Easy installation and looks very clean, 5/5 stars because it is a simple design and works perfectly. Picture 1. shows first start up when turning key in the ignition to on- it lights up going across which has a cool look ^-^ Picture 2. general operation with bike engine off. Very useful in the case of the CBR250RR which has low power available! View detail
Length is missing!
I bought a code with Meter missing Length!
It did not arrive at the originally attached code at all and added in a panic when asking for Adapter!
Those who are planning to purchase Meter from now will think that it is better to measure the length from the place to be installed beforehand.
View detail
To install the Oil Temperature Gauge!
I bought it to attach a sensor attached to Meter to my Motorcycle!
Even if it is not this, there is another Sensor, but I made it here for price.
It would have been better if possible with Red Anodized as well as Blue's Anodized!
View detail
Fits: YAMAHA Cygnus X, YAMAHA Cygnus X, YAMAHA Cygnus X, YAMAHA CYGNUS X, YAMAHA CYGNUS X, YAMAHA CYGNUS X, YAMAHA CYGNUS X
It looks good!
I bought it with good price and shape.
I did not think about performance at all. But
Fit with a feeling good to your fingers other than
It got easier to grasp. Good looks are also good
The exchange was also easy, so it was right to purchase it.
View detail
Ninja 250 used for 14 years MODEL
This type of Exhaust System Slider is manufactured by Manufacturer's HPetc. Large bodies, many of which are attached to mopeds and Scooter type, "Is not it suitable for medium size Motorcycle or Large type Motorcycle?" I think, at least this time Ninja 250 (MODEL 2014) It showed its performance.
Only once after installation (During turning) I got standing, but the Exhaust System was intact.
However, it seemed that I could not bear the weight, so the mounting Bolt bent.
However, I just bent a little, so I replaced it with a new Bolt and settled.
Since there is also a Dress-up effect, why not try installing a heavy Motorcycle?
* Ninja 250 is a space for gaps "Pon attachment" can not.
Please prepare Spacer of 3mm ~ 4mm separately.
I used KITACO for M 10 Spacer 3 mm thick (0900-093-01017) , Mad Star's Aluminum Washer Set of 10 pcs. Thickness : 1mm (S-252) 2 types of is.
The outer diameter of Spacer is the limit of 16 mm.
View detail
Standing etc. To those who want to protect the Large exhausted Exhaust System from
This type of Exhaust System Slider is manufactured by Manufacturer's HPetc. Large bodies, many of which are attached to mopeds and Scooter type, "Is not it suitable for medium size Motorcycle or Large type Motorcycle?" I think, at least this time Ninja 250 (MODEL 2014) It showed its performance.
Only once after installation (During turning) I got standing, but the Exhaust System was intact.
However, it seemed that I could not bear the weight, so the mounting Bolt bent.
However, I just bent a little, so I replaced it with a new Bolt and settled.
Since there is also a Dress-up effect, why not try installing a heavy Motorcycle?
View detail
Fits: YAMAHA Cygnus X, YAMAHA Cygnus X, YAMAHA Cygnus X, YAMAHA Cygnus X, YAMAHA Cygnus X, YAMAHA BWS125 (Bewith), YAMAHA BWS125 (Bewith), YAMAHA BWS125 (Bewith), YAMAHA BWS125 (Bewith), YAMAHA Cygnus X
Used for other models
I used it for Honda's ZOOMERX.
Bolt type, Spring position can be attached without problems.
I can not install the SafetySensor, but there is nothing to do with it ...
Because it is a little too long for ZOOMERX (Although it may be Length as it is) I cut it about 3 cm and use it.
Although it is the product itself, it is a lump of Aluminum, so the ground plane will be scraped and it will be scraped. Well it's not like rusting like iron so it's kana
View detail
It is firmly cheap
As a Sensor adapter, at a cheap price, Aluminum's Anodized. The quality of Anodized was also good and good product.
I did not get scratched when tightening again with Spanner.
View detail
Cheap! Easy to see!
KOSO's Temp meter is cheap and easy to see Recommendation. I purchase multiple items and use it.
I installed it in a Battery reply car of NS50F, but it did not work with Idling without Battery, but now I can also work with Idling if I connect Condenser.
View detail
Fits: HONDA PCX125, HONDA PCX125, HONDA PCX125, HONDA PCX150, HONDA PCX150, HONDA MONKEY
How accurate is it?
We introduced a sub computer so we introduced an air-fuel meter.
I am worried about how much accuracy it is, but it will be a guide,
It was satisfying because the installation was also easy.
View detail
In case of emergency.
Installation is very simple as it is Bolt one. It is cheap, but the making is very good impression. I am happy that both 8 mm hole and 10 mm hole corresponded. Bolt also comes with a total of 4 M8 x 2 & M 10 x 2. I installed on the bottom of the Exhaust System to protect the outside exhaust system. View detail