Reviews
Fits: HONDA CRF 450R, HONDA CRF 450RX, HONDA CRF 300RX, HONDA CRF 250RX, HONDA CRF 250R
Grip feeling Up!
[How is it used?
Used on CRF250RX '22 model. frame protector is a frame protector that only reduces scratches and damage to the chassis, but this ACERBIS frame protector has a rubber-like outer surface that improves the grip between the boots and the frame protector. It is an excellent product that also improves the grip between the boots and the frame.
Was the one you received as per Image?
The color is better than I had imagined and looks great.
Was the installation difficult?
The instruction manual, while a bit confusing, is included in the package, so I had no trouble at all.
Resin parts are inserted into the hollowed-out cylindrical part of the body and fixed with Screws. Bind it to the frame with the attached rubber. Is this what you want? But it is very accurate and firm, so it is totally sturdy and large.
How was your experience with it?
The Grip feel is totally different.
The ankles of my boots did not fit the frame properly due to the thickening of the knee side after wearing the knee brace, and I was feeling uncomfortable. With this brace, the fit of the ankle portion has been greatly improved, making it much easier to control!
I should have put it on from the beginning,,,!
Of course it serves its purpose of Guarding the Frame well!
[Included Parts:were they on?
Rubber and Screw for mounting, plastic parts for fixing Screw holder, and ACERBIS Sticker.
[Was there anything that disappointed you?
No, I'm not! I'm so happy!
View detail
Exhaust System Protection
Purchased for Exhaust System protection.
The Tie Band that came with it was fine, but I installed it with a Stainless Band that I purchased separately, just in case.
I haven't made any moss yet, so I don't know how effective it is, but it is definitely better than nothing.
Design is also good for Race ish.
View detail
Accuracy!
OEM Skid plate is Material:I was looking for a sturdy Other Brand Product, as I thought it might be damaged by a sharp, large gouge that might be a little thin.
It is hard to find other options for CRF250RX 22 and later models. I first tried to use a guy from another overseas brand that was not listed on Webig, but the accuracy of the screw hole position was so bad that I could not fix it with Screw, so I cried and cried and fixed it with inHemp palm. I was so sad that I couldn't find it and lost it after all.
At that time, ACERBIS released this one, so I bought it immediately. The hole position was perfect and I was very impressed.
The previous one I used had the LINK part sold separately, but this one is one piece and easy to put on and take off.
There were Black and Red, and I chose the bright Red so that if I lost it somewhere in the future, it would be easy to find. I installed it and it looks good in person.
View detail
Fits: YAMAHA WR 125 2T, YAMAHA WR 250 2T, YAMAHA YZ250, YAMAHA YZ125
Both Boots and Frame can be protected.
When I was riding my YZ125, the Frame and Boots rubbed against each other.
I bought it to keep both Boots and Frame down as they are both coming down.
The frames have not decreased in size, and the boots do not seem to hurt as much because the plastic is softer around the boot.
However, the Frame protector was clearly more sharpened after just one ride.
I thought it needed to be replaced regularly.
I did not feel any particular discomfort in the Knee gripetc. when I rode.
View detail
Used to repair TRYFit Bolt dropout
Used for ACERBIS TRYFit.
The Bolt that came with the hand guard when I purchased it fell off when driving and was lost, so I bought it to repair it.
I was very happy to see that they were sold as a single item.
View detail
Worked perfectly for me!
Works great. I like how it has a protective lense on it. I have it under the lense protect the screen and it has no scratches on the actual screen.The double sided tape is holding up great.On the occasions that I have forgotten to lock it when my bike is on the trailer I have not had an issue with it logging time like some people have had. My only complaint is that sometimes it can be a pain to get the hour meter to lock when I am getting ready to transport it. But for the cost and ease of installation that’s a minor complaint for me.I haven't had any issues with it picking up vibrations during transport and I've measured it several times. Highly recommend and much better than the wired version. I use it to track oil changes and other hour related maintenance. View detail
Looks cool
It looks really cool, but the Elastic band tends to loosen easily, so if you don't have OffBoots, it will be out of position. View detail
be tightened
The Inner Tube is a protective tube for the Inner Tube, which can be installed with a fastener so there is no need to remove and install the Fork. After installation, the Inner Tube is less dirty and clearly effective. The maintenance reduction in cost will be achieved in the long run because the dust seal is less likely to be attacked by fine sand and gravel. View detail
Standard!
If you are going to do an Enduro race, this is the Mast product!
Since I am a beginner, I could not avoid tipping over, so I chose this product, which can also be used as a closed type.
There are several patterns that you can choose from, so you can cover all the weight reduction when you improve.
The Material is all Plastic, but it is quite strong and quite Merit that it does not break with a slight fall or contact.
View detail
I'm satisfied
I preferred it compared to other companies' products.
Buy this one.
Installation is not particularly difficult.
I think the accuracy is good.
Pressed somewhat against the vehicle body during installation.
It feels like it is twisted.
Material is Material:Plastic.
View detail
I don't know
I think it is normal in terms of feel. The texture is also normal. I wanted a stronger bite, but I couldn't find one.
Installation is also very easy. Anyone can easily install it.
View detail
Boots slip prevention
Damage prevention for both Off-road boots and Frame. You can Grip without hesitation after installation, and I think the design is good. View detail
I love it
I couldn't help but notice that when I was on
I'm in the habit of holding the body down with my calf.
I thought the Frame paint would come off.
I was trying to divert the Heel Guard from another car.
I was thinking about it, but there are a lot of Frame guard
I found out that it was out there and
It was a shade that didn't stand out too much.
I chose this one.
As for the installation, the Change Pedal side
I felt that the lower part was a little difficult to install.
It was installed without any problems.
The Brake Side was installed in a few minutes, so it was very easy.
If you have tools such as Socket, there should be no problem.
I gave the Change Pedal side 4 stars because there was a gap at the top of the pedal, but the Brake Side was good with no noticeable gap.
The tint is a bit darker than the Frame color, Silver.
I didn't particularly care for it, so I was satisfied with the product in a casual way.
View detail
It is quite good.
Installed on CRF1000L.
Gold Outer tube can be hidden.
It turned out to be as good as the Image.
The rest is durability.
I hope the price is a little lower.
View detail
Hand guard installed
I installed it on the front and rear pad of my HUSQVARNATE250, which I always use for fun rides on forest road touring and EnduroCourse.
I had been using ZETA aluminum frames, but when I removed the hand guard, my handling became very light, and I felt that making the outermost part of the motorcycle heavier would significantly reduce mobility. I decided to switch to ACERBIS without frames, even though the protection was less.
I like it because it is lightweight without a frame, and it protects my hands and lever without compromising handling. The only drawback is that it shifts easily, but I am willing to put up with that because the light weight is more important to me.
View detail
Fits: BETA RR 2T 250 RC, BETA RR 2T 300 RC, BETA RR 4T 350, BETA RR 4T 390, BETA RR 4T 400, BETA RR 4T 430, BETA RR 4T 450, BETA RR 4T 480, BETA RR 4T 498
Very comfortable to use!
I replaced it because it was worn out a lot with the new Boots.
I made a new one with the same one this time because it has a footpeg Grip feel and is friendly to Boots.
View detail
I felt it was too tight in the Smallest Gloves.
I tried to see if I could use it for long touring, but the conclusion was that I did not feel much replacement, but rather fatigue.
It is easy to put on, does not Gap in the Gloves, and the Material seems to be stretchy and strong. No signs of ripping or tearing.
However, perhaps it was because the gloves I normally use are just the right size, but the palm of my hand was quite thick and felt tight. I found that it was very hard to grip the grips without a little room in the glove size.
However, I felt that the vibration reduction effect was actually quite good, and for Motorcycle Riders with high micro-vibration, such as 4-shot engines, it may be expected to absorb vibration.
View detail
I bought one for my next vehicle.
I have used this disc in the past and purchased it to install in a new vehicle. I have never had any problems with the disc bending, so I know it is working properly.:The design is simple and parenthesis is good. The price is not too expensive, so I think it's a good cosmetic product. View detail
Fits: YAMAHA YZ 125, YAMAHA YZ 250, YAMAHA YZ 250F, YAMAHA YZ 450F, YAMAHA WR 250F, YAMAHA WR 450F
Necessary to attach Disk guard
I have used it and it has never broken. I bought it because I was happy with it and thought I would use it on my next vehicle.
I haven't used it in the BrownHard place, but I have fallen more times than I can count, but it is Large sturdy and durable.
View detail
Fits: HONDA CRF450RX, HONDA CRF450R, HONDA CRF250RX, HONDA CRF300RX, HONDA CRF250R
ACERBIS X-GRIP FRAME PROTECTOR Honda CRF 2021
Excellent product.Great quality. It has a Perfect fit and super easy to install.Instructions are clear and should take no more than 10 minutes. View detail