Reviews
Good Design
I have used Magnum's hand guard for 15 years, but finally I liked Design appeared!
Although the price is a little expensive, it is GOOD with both the design texture attachment!
Gold genus Frame is not anodized processing, but it is coated with resin and I like the text with a different texture. The shape of the Knuckle guard is also cool in the cool design.
It is good to use only with resin coated bar, so at bar MOTARD only bar, OffSpec. Sometimes Knuckle guard should be installed and used properly - - -.
Log guard of Hand guard is not sticker, it is three-dimensionally processed with resin and this is also GOOD!
Handlebar can also correspond to 22 mm or 28 mm, it is also a bargain dish!
View detail
It looks like Sharp.
The Fork of the TT 250 R RAID was degraded and replaced.
Installation was also easy with the included Tie Wrap. Appearance improved Parenthesis.
I heard that deterioration is earlier than Bellows, but because it is cheaper than Bellows, it is good.
View detail
Easy Custom
I use it for DR - Z 400SM.
Electric Drill is required for drilling.
Mounting positioning is no problem at all. I think that you can purchase with confidence.
It seems that it affects driving though it is a feeling degree.
This time I tried to write a review unusually because the shipping speed of Webbuk and the free shipping service were large thanks to Large change.
Purchase Wye Big is definitely profitable.
View detail
Cover Duct by thinking about winter season (Screw closure) Is included?
I bought it in anticipation of a tough winter in my hands. Knuckle guard will be purchased for the first time, but I do not know which Manufacturer is good, first I picked some candidates in my favorite form and decided on a good Arche Screw evaluation of Imp among them. This product, Cover that plugs Duct comes with this Cover installed (Screw stopped at 3 places) Then Knuckle guard area increases. ← If you can see the picture ,,, View detail
Very well done
Reliable feeling is high because Cup of the knee is deep until SIDE.
The length to enter Off-road boots is also appropriate.
Even if Protector is divided into three and knees are bent, Adjustment Belt is Zupa or Moving part is Smooth.
Even if you wear it on the ground it's so soft that the interior is softer.
View detail
If you do not like BellowsBoots
I did not like Bellows of erect Fork, I made it here.
For installation it is necessary to remove Fork,
It is not so much Large strange work so you do not have to worry Large will be durable.
Let's match the amount of protrusion properly.
I use this type since I was on SEROW.
(SEROW is a narrow one of certain famous Off-roadShop)
It is advantageous that the appearance is clear and the tear is inconspicuous.
Perhaps it will rain, I think water will accumulate on Dust Seal.
According to a certain Shop it seems that protection type of this type is higher,
It will be cool as long as it does not penetrate even the bushes full of thorns.
I feel that seams are weak. DT 230 LANZA's Fork
It's not that thick, but where I covered the Outer
I got a little frayed.
Tie Wrap is not used because it is quite hard.
View detail
There may be individual differences
IMSTank was not compliant but purchased with no good.
I gave it to my own good luck.
I am satisfied that it closes tightly and it also measures mischief.
View detail
MOTARDSpec. In!
NORMAL's Front fender was too long and I really did not like the feeling of MotocrossMotorcycle so I found this product as a result of various searches. After installing Seal for attachment attachment from the attachment, type (Us XR 650 R) You can install it if you drill a hole in the installation Pitch.
It was perfect if it matched only the color.
View detail
MOTARDSpec. The necessities of?
XR 650 R with MOTARDSpec. Although I made it, Normal fender was not able to receive anything so I was looking for various things, but I finally found it. Also attach the Seal for attaching holes to the Fender and the dimensions of the XR 650 R are written so open the hole as it is 10. I finished it with 5 mm Drill and attached it with Normal fender's Color attached.
Although the color is somewhat thin, Material : It's a Plastic item so it can not be helped.. Looks is very satisfying and satisfying.
View detail
Cool!
I bought it for mounting Tail light on Racer.
Because Universal's Tail light requires OEMFender to drill and so on, the Blinker hole is not empty, but it looks cool and cool.
Position, License Plate Light, Stop-lamp attached
View detail
Makeover
Because I wanted to make it look like Off-road, I removed this existing Fender and attached this Fender. Since holes were made to be able to know the position to be opened by Manufacturer, we opened 4 places and stopped with Size's matching Bolt. It took almost no trouble. I feel fresh by changing Image.
I wanted to make five stars, but because the color was a bit of White of Blue series, I was wondering whether the painting painted on Pure white with Spray of Pura Color before installing is one star Minus?
View detail
ACERBIS X-LED PLATE Tail Light
The LED of TER light of ACERBIS used before was replaced with this because Left half was cut off. It is perfect for external Fender. However, because it is not a shape considering the installation of Blinker, I had a hard time installing Blinker. I like Design because it is ◎.
View detail
Inner protection no longer classic
To protect the damage of the Inner Tube of Front fork from the stepping stones etc and to protect the Fork seal taking on the mud etc, no longer classic Items for Off-road motorcycle.
Installing - The replacement itself is easy to install just by pulling out Front fork, covering it from the top, fixing the upper end and lower end with Tie Wrap, but still it was a little troublesome to have to remove Fork from Stem.
This time I used it with CRF 125 F. Length was not a problem, but the thickness of Fork might not have been enough to use with CRF 125 F.
But, compared with the appearance of Bellows' Fork Boots, it became quite SMART, so ◎.
View detail
Although the number is not written, but one price. too high.
I do not write whether it is one or not.
Hand guard is Quantity : Pair (for Left and Right) So it's natural that this is only two, but actually only one is included.
In that case, 4 thousand yen both. Same price as cheap Hand guard though only Bar End.
Moreover, since it is convex on the Bar End side and concave Ku Rust is fitted to the Hand guard side, it can not be used for another Guard. OffParts can not be used as it can repair using excess parts and buy Parts with Rose.
View detail
I'm glad I bought it
Screen and Handlebar It is a car model that it is difficult to attach Knuckle visor because of horn, but in this case I bought it as Large sturdy.
As you can see, I had to spacer the Spacer but I could safely install it without any interference.
Large I thought that the windproof effect which I did not anticipate in the morning was more than it was imagined and it was really good to wear it.
There is no play as there is tightly installed and the vibration is not at the present place.
I think that price is worth a little though it is worth it.
Personally I wanted to put on Short lever a little bit further if I would rather greed.
View detail
Front fender exchange
I also liked OEM's Front fender, but since I thought ACERBISSuper motard front fender was Cool, I exchanged it.
For installation, holes for mounting are not opened, so it is necessary to drill, but since Seal with dedicated grid is attached, positioning is easy and you can drill if there is only Drill. (I failed and opened two holes separately from the mounting holes. Once installed it will disappear. )
Although it is the installation to WR 250X, since it will create a gap with Headlight cowl only by replacing Fender, we moved Headlight cowl down and installed it.
I do not know in the image, but it looks really different from the OEM's White because it's completely different color..
It is unavoidable that the color is different because of the Universal Product, but I made the evaluation four stars.
View detail
Mounting with ZETAMount
Well originally
Installation Manufacturer Although it would be better to arrange
It is installation using ZETAMount on account of the delivery date.
Completely added work etc etc. It is possible to install without need.
From ZETA's thing
- Feeling that it seems to cool down is good
- FBrake Caliper seems to protect the lower part
- Manufacturer logo is entered at One point and there is no sense of noiseliness
So I selected a cotch
I would like to hopefully guard the disc firmly.
Incidentally
The color of White is slightly blue.
It does not match with White of WR 250 R
It matches White of ZETA's Hand guard.
It matches White of Side cowl of ZERO-G.
Why is not it?
View detail
There is a difficulty in durability.
Rubber of the Waist belt part which fits to the body has become licking with twice use!
It is good that the heavy tool does not shake as it fits the body, but durability is too little.
View detail
Although there is no problem in function ...
【What made you decide the purchase?】
I was able to lock the tank cap and purchased it because I could use it for IMS's Big tank.
【How was it actually used?】
CapLarge, the impression of the car changed by the Large rinse. Although it can be used functionally without problems, there are not many opportunities to use.
I think that it is a good part to prevent Prank.
[Is there anything I was disappointed about?]
It's too big
【Hope for Manufacturer - Please let me know if you have any improvement points]
There is none
【Have you compared items?】
There is none
View detail
cool
Drilling is necessary but it was easy to install thanks to the attached Seal. I also matched with Cowl of DT 230 LANZA and it became tightened looks.
It is still better if there are alternatives for other colors!
Fender which is similar to certain Oakon sells at 2000 yen or less and hesitated a little for the price, but it is very beautiful and it was a correct answer by buying the real thing.
View detail