Reviews
Fits: YAMAHA YZ125, YAMAHA YZ250, YAMAHA YZ250X
For Dress-up
Parenthesis is nice, but honestly, I'm not sure if it's worth the price.
You might want to spend your money on something more practical.
View detail
Replace with Stainless Steel
The screw I was using was rusty, so I changed it to this Stainless Steel one.
There are many sizes to choose from, and you can buy the size and length you want.
View detail
Super trap Diffuser Disc Mounting Bolt
I considered buying this as a replacement for the Super trap and Diffuser Disc mounted Bolt. View detail
I used it after I polished it.
It hasn't been long since I replaced it, but the Rear Sets bolt was already starting to look disappointing, so I decided to replace it. It's a normal button cap bolt, but I couldn't find M8 at my local home center, so I decided to buy one from posh. 25mm Quantity of M8:2pc, 20mm 4pcs, 15mm 4pcs, M6, 30mmQuantity:2pc, 20mmQuantity:2pc, Total 7Quantity:I bought a set, and it cost me a good amount of gold. The price is quite expensive compared to a standard cap bolt.
I've heard that if you use stainless steel bolts on aluminum and other metals, you need to be careful because it can cause contact corrosion of different kinds of gold. I have used Stainless bolts on various parts including aluminum, and I don't remember any corrosion occurring, but this time, I applied Aluminum Grease to the bolt as a precaution. I'm going to keep an eye on it periodically for a while to see if anything strange happens.
I thought I could use the bolts as they were, but the surface of the heads was very uneven and the finish was not quite right, so I decided to polish the heads of all the bolts before installation. I decided to polish all the bolt heads before installation.:After setting, I polished it with Sandpaper while rotating it, and then polished it with METALCompound while rotating it as well, to make it shine a little.
I replaced all the bolts and they look much better. The polishing process was extra, but I am very happy with the results.
View detail
color coordination
When fixing the Bracket, the color of the parts was Black, so I bought this one to match the Fixing Screw.
If it were a little cheaper, it would help.
View detail
Don't lick it.
It is better to apply the tool firmly so as not to lick it. View detail
rust removal
I think you should do Rust removal on a regular basis. View detail
HexBolt。
I'm grateful to be able to buy from Rose. View detail
Feels like it depends on where you use it.
I didn't use it because the hexagonal part was shallow and I almost blistered it. View detail
It might be a little rusty.
Inch size is hard to find, so it is very helpful. View detail
Mm-hmm.
It is not suitable for the place where Torque is applied. View detail
If Rust is
It's starting to rust a little, needs some Rust treatment. View detail
As for Bolt.
I think the quality is better for Bolt. View detail
that's right
It's not sold in stores, so it's very helpful. View detail
that's right
It's not sold in stores etc., so it's very helpful. View detail
Fits: KAWASAKI Zephyr 400, KAWASAKI Zephyr 750, KAWASAKI Zephyr X, KAWASAKI Z1 (900SUPER4), KAWASAKI Z1-R/Z1-RII, KAWASAKI Z1000, KAWASAKI Z1000 MkII, KAWASAKI Z1000J, KAWASAKI Z1000R, KAWASAKI Z2 (750RS), KAWASAKI Z400FX/Z400J, KAWASAKI Z750FX, KAWASAKI Z900 (KZ900), KAWASAKI Z1 (900SUPER4), KAWASAKI Z1-R/Z1-RII, KAWASAKI Z1000, KAWASAKI Z1000 MkII, KAWASAKI Z1000J, KAWASAKI Z1000R, KAWASAKI Z2 (750RS)
It's not easy to find and sell.
The price is 200 yen for 4 tiny screws, but this size dish screws are not sold in Home center.
You might be able to buy it a little cheaper if you go around to Screw shops and look for it, but if you think about the time and effort, it might be cheaper to buy this Screw.
Be careful not to lose the pure Normal Thread Screw.
View detail
Package for additional purchase
I don't have a little Bolt! It would be convenient if there is a home center or a gold shop nearby that sells bolts in bulk, but it's not always easy.
I'm lucky to be able to buy it at Site, but I don't think it's very cosy because there are so few of them.
Plating is regular Uniqlo. I use it on the parts that get rusty, but it seems to have a thicker coating than the cheapest product because no rust comes up in about 2 months.
However, the one I installed on my exhaust pipeCover was covered in rust within a month. In high temperature environment, it will be damaged just like other Bolt.
View detail
No particular feature
It's a very ordinary Uniqlo plating Bolt.
You can choose Pitch, so be careful not to make a mistake.
In my case, the fixed bolt of Silencer had disappeared before I knew it, and I bought it hurriedly as a replacement, so I was satisfied if the pitch was right. If I say a detailed point, when I buy the same etc. goods of Uniqlo plating at Home center etc., because it is about 1 pc50 yen, it is rather expensive.
The surface treatment is very strong and there is no rust on the surface after one month of installation.
It's an unadorned Bolt, but if you're not particularly particular about it, there's no harm in buying it along.
View detail
For aesthetics or for performance?
This is my first Titanium made by ZETA.
I use a certain B company's product as Main, but the point that ZETA is better is that Bolt hole is polished even M8Size.
Company B's M8 and above are hot forged and have very high strength, but the bolt hole is discolored, so ZETA may be a good choice if you want to convert to Titanium just for aesthetics without needing durability.
View detail
Look, in exchange.
One point, because it was Aluminum with Color, it is a purchase for the fixation of the place where the force is not applied with self-satisfaction.
The Taper shape looks good, but it will lose color over time, how long will it last? I wonder.
It's Color Anodized Aluminum, so it can't be helped.
Also, it wasn't a SpongeSmall divided container like the picture posted.
View detail