Reviews
I was looking for Stainless made Hose Band with Small diameter
There is no problem with the function.
From RustRust's Hose Band, I became Rust's no worries Hose Band and I refreshed!
Among the remaining Band, other Motorcycle's Hose Band will also be exchanged.
View detail
It stopped perfectly!
This time I used NTB's Hose clamp here to stop the Clamp part of the joint of Fuel Hose of Motorcycle (((O (* ゜ ▽ ゜ *) o)))
Since the installation position is a gap between Tank and Air cleaner box, there is worry that the environment of the installation position will not rain directly but it will rust soon, even though rainwater does not hit it He briefly blew the heat resistant Silver and tried installing it from blowing Clear which is not heat resistant from the top) ^ o ^ (
Size of Hose is also perfect, it is securely fixed, so even if you try to pull it a bit, it is stopped without problems and there is a sense of security.
In addition, I tried using the same thing for negative pressure Hose, but that can be used without problems.
In this type of Clamp, there are things that cracks may enter the Hose side or tears off the Hose if tightening is used for a long time, but there is one side which is somewhat molded in this Clamp I could not see the part that is likely to cause such a large Trouble. (We have not seen it for now)
Do you have any disappointing points?... As I thought, it is somewhat concerned that there are times when the knob part gets bent depending on the angle at which the knob part softly pinches as a disappointing point...
If you consider this softness to be exquisite softness that does not hurt by tightening Hose too much, you may be making it with this softness...
Several months have passed since installation, but since it can be used without problems, I think whether it is quite good product of COSPA for price.
Looking at the situation in the future, if there is nothing that will cause problems, I'm thinking about installing it on another vehicle.
I think that there are also many people who are not using Hose clamp because it is troublesome to attach or remove every time. (I was like that before)
It is too late after Gasoline leaked because Fuel hose got out of the way while you were running or getting your eyes off. How would you consider purchasing and installing on this opportunity?
View detail
Used for CUB90DX
Buy as if you want to make it easier to pinch when exchanging Hose system.
Probably easy to pinch.
I did not need this, but I will treat you as well as it can be taken as a reserve.
Usability is GOOD.
View detail
Unified with Black
Since Blowby's Hose is Black, I tried to unify it. I think that most people do not notice but the degree of self satisfaction is 100%. A little fashion? It is more expensive than a normal Hose Band, but I think that it is a good product for people who want to put on something different or different from a person. View detail
There is no doubt.
It is an essential item to install Hose. Because Hose is Rubber, it will become thinner over time, but in this case it will be fast enough to tighten it so it is safe. I got lost as to how to choose Size, but it was nicely settled to fit the outer diameter of Hose. View detail
There is no doubt.
It is reliable DAYTONA product, it is inconspicuous Black color, making is solid and price is also cheap so it is no complaints. It is necessary to choose Size according to the size of Hose, but if you choose by the outer diameter of Hose, it will go away with a slightly tightening feeling. View detail
Reliable Hose Band!
I am using this power band because I am worried about Clip attached to Hose. Firmly It closes us so it is very safe. Easy to use than Clip so you can grasp easily with Pliers. View detail
I am using it for Buell X1. (*^^*)
I use it to stop the loosening of the plug of Drain hose of Oil tank of Buell X1.
I do not remember when I exchanged, but the Orange 's knob faded faded, but I can still use it. (*^^*)
I think that the OEM was Clip 's Clamp, but this is very useful as it can be loosened by hand.
It's a bit of Parts, but it is quite advisable because it will allow you to exchange Oil without tools.. ! (^^) !
View detail
PressureValve Installation Band
【Deciding factor of purchase】
I bought it as Hose Band for installing KTM's BackPressureValve in FZ1FAZER. Since I have attached the product T-REV as well, I bought the same Band out at Repair Parts.
[Try to use it actually]
Because I wanted a Black Hose Band for PressureValve installation, I am satisfied with the purpose, but in reality, the parts attached under the Tank can not be seen from the outside at all. Unexpectedly expensive parts, if you do not mind the color of Hose Band, you may have been able to substitute cheaply for what Size matches at Ohm Center.
View detail
Tightness is good!
Buy to buy Plus a sense of security for Hose Stop.
I think that the feeling of being closed is strength that you can rest assured.
I'd like to position ahead of Hose in a slightly narrow place
Although I had trouble loosing the Clip part by hand
Fit feeling is a good feeling.
I tried to pull Hose lightly by hand,
Well feeling is Large durable because I can not get out quite easily!
View detail
I am saved because there are various Size
I put a Filter in the middle of Fuel Hose, but I was curious that there was no Clip.
Since this product contains a lot of Size, it was saved because I was able to choose the best one while checking Size.
Material : I think that the point called Stainless Steel is Point.
I exchanged it other than where I was going to replace it.
It is saved that the price is cheap.
View detail
Hose separator
I changed the Hose of MONKEY's Oil cooler from Mesh to Rubber hose, so I bought it for fixing Hose.
Anodized Treatment is also well PetitCustom (One point) I think it's good.. If the price is a little cheaper it is a 5 star but I think that I am satisfied with my self.
View detail
Satisfied with Cost performance
Because the Overflow Hose Clamp currently installed is deteriorating, I was looking for OEM Product's Overflow Hose Clamp, but it was out of print and purchased PMC made.
The texture of the product is not bad and we are satisfied.
View detail
Stop
When replacing Fuel Hose or cleaning the Carburetor
It is a useful husband (^O^) v
How to use is also very can Tan Why do not you put it in a tool box one?
View detail
It will be cheap. - - - - - Wax.
Although it is cheap, I ordered the outer diameter Size of Hose with Vernier calipers, but when I installed it, I got clip elongated and it did not become usable. I had anticipated that it would be so structurally - - - I learned a lot. Next time I decided to buy a wide type. View detail
It stops properly
It looks cheap and looks like a toy, but it does the job properly.
Since CUB does not have Fuel Cock in Tank, it is a necessity when removing Fuel Hose.
View detail
For times of use
GSX 1300 R HAYABUSA has Ting with Hinge and raises it up Air cleaneretc. It is designed to make it easier to work
(It will be like a car's Bonnet with a fixing bar)
Naturally, Tank has Fuel Hose but since Length is perfect, I used to raise Tank too much before I removed the fuel side Pipe on the Engine side (By the way GSX 1300 R HAYABUSA does not have Fuel Cock)
I bought a Hose clip to prevent that tragedy
It was very cheap and I felt good to use it without forgetting to remove it with a noticeable color so I am satisfied with Large
View detail
Removing frequency is a lot.
In Maintenance, Tank, Fuel Filter, Carburetoretc. Since the frequency of desorption is high, Hose clip is easy to grab work efficiency is good.
Wire type is frustrating because I can not grasp well with Radio pliers.
With this Type it is easy to grab and can be attached to Smooth. I wish I had had a chic inconspicuous Black.
View detail
Easy to pinch
I am using it for APE, but since I frequently insert and remove Hose with Carburetor setting, I found it by looking for something easy to remove without clip?.
Things were easy to pinch easily and became easy.
But, 1pc. I feel that it is too high 90 yen or more.
I wonder if it will be about 50 yen at least.
View detail
Fits: HONDA Superdio, HONDA Dio (2 Cycles), HONDA livudio
Was easy to install and looks good better than the stock one nice job. Fits my 220mmdisk perfectly would recommend this set to any one who owns a moped or scooter.
Was easy to install and looks good better than the stock one nice job. Fits my 220mmdisk perfectly would recommend this set to any one who owns a moped or scooter. View detail