Reviews
Fits: KAWASAKI Z2 (750RS/Z750FOUR), KAWASAKI Z1 (900SUPER4), KAWASAKI Z900 (KZ900), KAWASAKI Z750 (air-cooled)
Although based also on liking, heavy touch of the appearance of a rear circumference is lost and it is felt refreshed. It is hard to throw away the plating fender of normal. Also when a product makes a hole later if needed by the sectional type ma
Although based also on liking, heavy touch of the appearance of a rear circumference is lost and it is felt refreshed.
It is hard to throw away the plating fender of normal.
Also when a product makes a hole later if needed by the sectional type made from aluminum, it is easy to give it, and its reinforcement is also enough.
Since processing of an end is whether it is not quite satisfactory, and is injured during attachment, or an open circuit of cables, such as the worst blinker, also occurs, it is merely necessary to tame with a file.
Moreover, since it will crack if direct attachment of the number plate is carried out, recommendation uses a number base etc. together.
Moreover, since the hole of a bolt has adopted the slotted hole in some places and the location of a tail lamp or a number can be adjusted, unlike the thing of the other company, a good place can adjust to oneself liking.
Fundamentally, structure is solid, and since PMC products are the touch which those who understand the thing of Z well are building, I regard them as there being not only this but many good things.
View detail
Since lineups were only a magical and nao, nao was decided on in the form. The circumference of rear one becomes tight and it becomes very smart. Accuracy is also with cushion parts satisfactorily. Further, I bought cushion parts and did them.
Since lineups were only a magical and nao, nao was decided on in the form.
The circumference of rear one becomes tight and it becomes very smart.
Accuracy is also with cushion parts satisfactorily.
Further, I bought cushion parts and did them.
I think that a size also with a practical chain case may be sufficient.
View detail
delivered goods peel off an abrasion and paint application -- etc. -- it was, and it was dirty to the extent that it could not attach without paint application. Although it is rather good to carry out -- paint application to the panel which the black
delivered goods peel off an abrasion and paint application -- etc. -- it was, and it was dirty to the extent that it could not attach without paint application.
Although it is rather good to carry out -- paint application to the panel which the black gel was purchased since he did not want to paint, but is painted after all, to equip, and to see -- When attaching with a zoomer (ruckus), I think that the fixation by two cable ties is difficult.
View detail
The inside [ on this morning ] load arrived and it attached instantly. After removing a tail cowl, attachment will be OKed, if the fender portion (from a number LGT to the bottom) of normal is removed and it attaches there. It was easy. Since
The inside [ on this morning ] load arrived and it attached instantly.
After removing a tail cowl, attachment will be OKed, if the fender portion (from a number LGT to the bottom) of normal is removed and it attaches there.
It was easy.
Since portions, such as an accessory case, are still normal, they are safe.
It was good, the thing which loosens in a nut, and is stopped and attached to it was used, and the accuracy of the main part was also likable.
I wanted you to make the coupler of only one point and a number LGT together with a pure thing.
I think that it is the product excellent in cost performance if the neighborhood would be known and you would like to make a simple since the angle of a number is not changed.
View detail
Fits: HONDA XR50 Motard, HONDA Ape 100, HONDA Ape 50, HONDA APE 50, HONDA APE 100 TypeD, HONDA APE TypeD, HONDA XR100MOTARD, HONDA NSF100
In wearing design, it was very pleasing in XR100 motard, and purchased to it. Attachment is also easy and very pleasing. Although the present state of paint application is also beautiful, does the way become more beautiful having painted too?
In wearing design, it was very pleasing in XR100 motard, and purchased to it.
Attachment is also easy and very pleasing.
Although the present state of paint application is also beautiful, does the way become more beautiful having painted too?
A run thinks that it is sheathing parts which become pleasant.
View detail
Fits: DUCATI MONSTER S4Rs [Monster]., DUCATI MONSTER S4R [Monster]., DUCATI monster s2r1000 [monster]., DUCATI MONSTER S2R [Monster]., DUCATI MONSTER S4Rs [Monster]., DUCATI MONSTER S4R [Monster]., DUCATI monster s2r1000 [monster]., DUCATI MONSTER S2R [Monster].
S2R800 was equipped. Rear suspension could be protected from dirt and appearance also became very good. Wearing was also comparatively easy and the location of the mounting hole was also correction needlessness.
S2R800 was equipped.
Rear suspension could be protected from dirt and appearance also became very good.
Wearing was also comparatively easy and the location of the mounting hole was also correction needlessness.
View detail
Fits: HONDA CB1300SF, HONDA CB1300SB, HONDA CB1300SF
Since he did not like a pure fender, it purchased. Working hours: Required 8 mm 10 mm 12 mm of tool:wrenches, 4 mm 6 mm 8 mm of hexagon wrenches, plus driver, and cookbook with an adhesive-bond plus point image stick for about 30 minutes, and it was a
Since he did not like a pure fender, it purchased.
Working hours: Required 8 mm 10 mm 12 mm of tool:wrenches, 4 mm 6 mm 8 mm of hexagon wrenches, plus driver, and cookbook with an adhesive-bond plus point image stick for about 30 minutes, and it was able to do work on the smooth.
The circumference of a tail feels it refreshed considerably.
Construction material also often has sense of security also in respect of durability.
If management and the connecting part of minus point wiring are explained by the picture of up, they will work more easily.
In the case of attachment of a notes kit, it is hard to bolt up a frame and the bolt of a kit connection part.
If it constructs by a temporary stop, it will be still loose wearing.
View detail
Fits: KAWASAKI W400, KAWASAKI W650, KAWASAKI W800
Although it wavered with the short fender of the daytona, it decided by the low price of the price. You come out fluently. since the raw material was a thing with aluminum, you are cheap -- although ~ was thought, it was a thing firm in practice with
Although it wavered with the short fender of the daytona, it decided by the low price of the price.
You come out fluently. since the raw material was a thing with aluminum, you are cheap -- although ~ was thought, it was a thing firm in practice with wall thickness.
It is very pleasing.
View detail
Fits: YAMAHA TW200, YAMAHA TW225E, YAMAHA TW200, YAMAHA TW225E
This product was found and purchased at the place which thought that the front fender of normal was somewhat unfashionable. Attachment is very easy, loosens a bolt, removes the front fender of normal, says that it binds this product tight with a bolt
This product was found and purchased at the place which thought that the front fender of normal was somewhat unfashionable.
Attachment is very easy, loosens a bolt, removes the front fender of normal, says that it binds this product tight with a bolt again, and is possible in an instant.
I think that the feeling of appearance of a front fender and a front tire is quite narrow, and it is stylish.
It is a recommend in the direction of having got bored with the front fender of normal.
View detail
Fits: HONDA GORILLA, HONDA GORILLA, HONDA MONKEY
Although it attached and about 5000 K passed, it has not been called breakage etc. in particular probably because it is fixing on both sides of a rubber between a hose band and a product. the product itself is thick and it is strong -- since that is r
Although it attached and about 5000 K passed, it has not been called breakage etc. in particular probably because it is fixing on both sides of a rubber between a hose band and a product.
the product itself is thick and it is strong -- since that is right, I think whether for it to be limited and to obtain [ which does not have that a crack is much ].
I match the section width of tire of TT100 slenderly a little rather than the normal fender, and think that appearance is dramatically good.
Although it is a spray, there is no telling whether it is better to consider the grade which becomes Massey a little also just because it changed into the down fender.
If it attaches ordinarily, a speed reading cable and a fender rub, and if I want one to improve, if it lets things go, it has deleted gradually.
View detail
Fits: YAMAHA FZ-8 FAZER, YAMAHA FZ-1, YAMAHA FZ-1 FAZER, YAMAHA FZ-8
Since it was felt a fender is too large and awkward, it purchased. Since its description was intelligible although attachment was somewhat serious, it is not difficult. The circumference of rear one felt after attachment very refreshed, and it bec
Since it was felt a fender is too large and awkward, it purchased.
Since its description was intelligible although attachment was somewhat serious, it is not difficult.
The circumference of rear one felt after attachment very refreshed, and it became quite good parenthesizing it.
The LED number LGT was also bright and became touch good.
Structure is also solid.
View detail
Some are regarded with using the fender less kit and combined use fender less of an active as lonely, and it purchases. Attachment is very easy. Since a screw cannot fasten if there is merely no box wrench in the case of attachment, they are cauti
Some are regarded with using the fender less kit and combined use fender less of an active as lonely, and it purchases.
Attachment is very easy.
Since a screw cannot fasten if there is merely no box wrench in the case of attachment, they are cautions.
In it, the object for 100, and the object for 50, since the die length to a screw is different, let's purchase rightly.
Since brightness will be lost if it is using weather-beaten although it does not rust, let's repair diligently.
View detail
Although he thought that he would paint according to body color, also as [ this ], it suits very well by black with luster. there was also no problem, especially the attachment itself came out easily and it carried out. An effect is pleasure altho
Although he thought that he would paint according to body color, also as [ this ], it suits very well by black with luster.
there was also no problem, especially the attachment itself came out easily and it carried out.
An effect is pleasure although a rainy weather run has not been carried out yet.
Moreover, the design which is not in others is also pleasing.
View detail
Fits: SUZUKI GSX1300R GSX1300R HAYABUSA(GSX1300R HAYABUSA)
When he wanted to exchange F fender from both sides of a weight saving and a style from beforehand, it was considering, but when the thing in which he is rather needed it being too brief and being pure-shaped was not found but it had given up, this produc
When he wanted to exchange F fender from both sides of a weight saving and a style from beforehand, it was considering, but when the thing in which he is rather needed it being too brief and being pure-shaped was not found but it had given up, this product was put on the market and it purchased immediately.
If he did not think that attachment would be removed without processing a pure fender (rivet which has stopped the fixing bracket of the brake hose), exchange was completed very simply.
The comment of carbon after wearing are good too! It is quite obvious that having had moreover is [ which feels and comes out ] lightweight!
It was good to exchange!! In the case of the attachment as notes, when it fixes with a bolt for the product made of resin, F fender is considered as it is better as a measure against a vibration sound to prepare a plastic washer etc.
As mentioned above, I am pleased if it becomes helpful.
View detail
Although we were models, we attached in 2006, and the very thing was possible. Although written also to the description ... it is because it is a handmade altogether -- accuracy of ? products was come out and used (bitter smile -- it may be the perfor
Although we were models, we attached in 2006, and the very thing was possible.
Although written also to the description ... it is because it is a handmade altogether -- accuracy of ? products was come out and used (bitter smile -- it may be the performance by which dissatisfaction remains in the more meticulous one.)
View detail
Fits: HONDA NSF100, HONDA NSR50, HONDA NSR80, HONDA NSR mini
The zoomer (ruckus) which has already transplanted time-tested ZX axle part was equipped. Although the fender of Saitaniya was popular, it was dared to choose the product made from a kitaco with the thick Faulk portion. It reveals and interferes i
The zoomer (ruckus) which has already transplanted time-tested ZX axle part was equipped.
Although the fender of Saitaniya was popular, it was dared to choose the product made from a kitaco with the thick Faulk portion.
It reveals and interferes in a tire considerably.
If molding to the Faulk portion from a nose is too thick and is not cautious of clearance, a tire will split.
since -- I think that I will process only a few in the near future.
Is it unsuitable for wearing of those other than NSR?
(although it is a natural result and becomes empty in other vehicle type appropriation)
View detail
Fits: KAWASAKI ZRX400, KAWASAKI ZRX400II, KAWASAKI ZRX400, KAWASAKI ZRX400II
ZRX400 was equipped with the racing fender of BEET. The pure fender which does not suit the arch of the tire greatly was disagreeable, and purchased. since there is only a white gel, or it carries out private paint application -- paint application
ZRX400 was equipped with the racing fender of BEET.
The pure fender which does not suit the arch of the tire greatly was disagreeable, and purchased.
since there is only a white gel, or it carries out private paint application -- paint application -- it must begin to be alike.
He applied by can spray.
It is satisfied with a small and racy fender!! Does front fender appearance become good with GUTSU? A tire also looks good and is smart.
I think that it is the one where a price is also cheaper.
View detail
Although cost performance is high, there is touch [ past / an insertion part / slightly tightly ] when attaching. It interferes in 190/55 size of a racing tire as it is.
Although cost performance is high, there is touch [ past / an insertion part / slightly tightly ] when attaching. It interferes in 190/55 size of a racing tire as it is. View detail
Although down fender stay was also good, this was decided on by appearance. Although it is fixation by a hose band, it can attach firmly.
Although down fender stay was also good, this was decided on by appearance.
Although it is fixation by a hose band, it can attach firmly.
View detail
Fits: YAMAHA TW200, YAMAHA TW225, YAMAHA TW200, YAMAHA TW225
It attaches and easy. Preeminent for the dress-up effect up. A bad cousin is not found in quality. With buffing, although it is beautiful, it becomes more beautiful by polishing up by oneself. It is expensive although it is unavoidable on
It attaches and easy.
Preeminent for the dress-up effect up.
A bad cousin is not found in quality.
With buffing, although it is beautiful, it becomes more beautiful by polishing up by oneself.
It is expensive although it is unavoidable on the relation of circulation.
View detail