Reviews
Dress-up casually!
Since it is a BreedCap, it is not very conspicuous, but it is like a casual dress-up. View detail
Not much change.
Maybe it's not necessary at this price? View detail
PetitCustom
Bleeder Cap is usually used for Material:The rubber cover is available in anodized color, and the aluminum cover provides an enhanced texture.
We chose the color Black because we prefer the OEM look.
View detail
The duct part of the cowl of the motorcycle is applied to the back of the cowl with a hot bond or Rivet.
By applying it to the back of the duct part of the motorcycle cowl and fixing it with a hot bond or a Rivet, it will look like a race ish and is available in a variety of colors. View detail
To protect the Radiator.
It is not uncommon to find Radiator's Protective Mesh specifically for each car model from each company, but they are expensive.
A single mesh panel of stainless steel or aluminum will cost you a fortune.
This is also Wallet-friendly and comes in a variety of colors, so it's a fashionable option.
Use a masking tapeetc. to separate the Radiator size.
Cut with Scissors and it is ready to use.
Of course, the Radiator is also perfectly protected for practical use.
I replaced it for a new one at ImeChain after using it for about 5 years this time and there were no dents in the fins.
The CB has a Plastic protective cover over the entire surface of the Radiator, so I made a sandwich between the Radiator and the protective cover.
If the car model is not equipped with such a device, it can be stopped by Tie Wrap or something.
View detail
AGUSTA
I was expecting a slightly darker Blue color in the Image, so I am disappointed in that. View detail
AGUSTA
It was easy to cut and easy to install. View detail
Mesh re-covering
When the A-techSeat Cowl is installed, the mesh around the brake is reupholstered and tightened. View detail
Small personality, durability is …
I found it to be a very good product for One Point Fashion for my feet.
The work itself only requires replacing the Breeder's Cap, so even beginners can do it quickly and easily.
The texture of Anodized was good and I thought it was indeed a Kohken product.
But it's not very durable;
After six months, the Rubber cracked, and after about seven months, only the Aluminum Cap was missing.
It may be inevitable for the structure to fly away, but the caliper generates heat, and I would like to see the use of heat-resistant and durable rubber.
We wanted to take a look at the NORMAL Rubber cap, so we gave it a slightly lower score.
View detail
Good Quality & Packaging
The item was fitted nicely in the bleeder. Good quality of the product and was packed properly. The color was very nice with the brand name on it. View detail
If you can see Logo as One point, you can.
I wanted One point around Breather, so I bought this one.
It is the logo of Koken in the small parts, but the logo insists unexpectedly.
I thought that the white letters on the blue background made it look like one point. I felt that it was a good idea, but I think it's a matter of taste.
In addition, I attached 3 calipers in total with Front caliper (Single), Rear caliper and Front master, but 2 Quantity:It's a Set, so in this case you'll have one left over, so you'll have to settle for a spare.
The construction is well made, but the cap part is normal rubber, so the durability is the same as the normal one.
Well, it's not a part that deteriorates so much, so it's Recommendation for those who want one point of color.
View detail
To dress-up the Handlebar area
Since I changed the front brakes master of MONKEY125 to brembo, I decided to install the Reserver. [Color] I combined this one with the one I made for Smoke.
In terms of weight, it is heavier than the OEM plastic because it belongs to Gold even though it is Aluminum.
The AnodizedSpec. does not have any logo, so the Handlebar area is tighter.
There is no problem at all about the processing accuracy, etc. because it is a reliable Koken brand.
The only problem is that the price is a bit high.
View detail
Fits: KAWASAKI 250TR
It's called Exclusive Design…
I bought it because my Motorcycle has almost Zero load capacity.
Koken's coloring is very beautiful.
In other people's Impressions. RALLY 591. However, the one I received didn't have a sticker on it and it didn't come with one. I don't mind because I don't particularly need it, but I think it's better to inquire if you feel you need it.
The quality of the Carrier itself is a bit questionable.
Parts are welded in a distorted manner.
OEM Parts (Tool Box) to interfere with
It says that the position gap is due to individual differences, but the gap is so large that it is uneasy.
To solve the above, I installed it with a little modification and additional purchase of Spacer and others.
I was worried because this is not a normal installation method, but I am quite satisfied with the look and practicality after installation.
View detail
These parts are perfect for improving the texture of the Handlebar area!
The brembo tank cap is Material:Because it's plastic.
I replaced it with Duralumin Cut-out's Anodized machined Koken Oil tank cap!
Black loves the KOHKEN K and the letters around the Cap.
View detail
The color and other aspects are good
It's a beautiful red color, and it matches the color of other aluminum parts
However, I chose Medium Eyes because I wanted to give it a Mesh-like look, but depending on the angle I should have made it less noticeable and finer
The texture is good, and the size is a little larger than the other companies, and you can use it for your own purposes I'm glad I was able to use it without (One CBR250R Under Cowl, two Side Cowl, Front (I used it for two Fender places)
View detail
Radiator guard was made cheaply.
I bought it instead of Radiator guard.
Material : Because it is Aluminum, Guard can not be done from the big lures such as stepping stones, but I think that it protects from insects and so on. We cut it to the Large size of the Radiator and used the rest for the Duct part of Front tireCover. The color is slightly darker than Kawasaki's Lime green a bit..
View detail
It is good as One point
I think that the price is a bit high, but the texture is very good.
I am also solid and making installation is also Can Tan.
Motorcycle 1 Set for 1 Vehicle all (Front, Rear, Master) I exchanged.
1pc. Because I have surplus, Quantity : 1pc. It will be helpful if you have it.
View detail
Looking Impact is Large Young - - -
【What made you decide the purchase?】
OEM's Bleeder Cap is degraded
Looking for alternatives, Color Anodized Aluminum
Because I found outstanding items, purchase.
【How was it actually used?】
Tasteless OEMCaliper Around one point Brilliant colors enter
Looks very satisfied.
【Was it difficult to install? (Hard parts case)】
OEM Rubber If the cap is tightened together with Bleeder Screw to prevent falling off,
I need to remove Bleeder Screw.
We, CaliperO / I did not have any problem as I went with H,
It seems that attention is needed.
(It may only be enough if you cut off the Rubber cap Band - - -. )
【Please tell me the point of installation and hang (in the case of Hard parts)】
Just like I'm addicted to my back
To hold down the top of Cap.
In fact if it is not properly attached, there is a danger of dropping out.
【Fit feeling and height when wearing - Please tell me the weight etc (Apparel case) 】 N / A
[Is there anything I was disappointed about?]
The color Anodized Aluminum part has a structure just covering the Rubber cap
It unexpectedly comes off easily.
Sometimes it gets dislodged at the time of car wash, so I was concerned about that point.
【Hope for Manufacturer - Please let me know if you have any improvement points]
I want you to take measures to prevent falling off of Color Anodized Aluminum part.
Also, I hope that the price side will do its best a little more.
【Have you compared items?】
For purchase, compared with Rubber cap,
From this appearance Impact, select this product.
[Others]
Although the Color Anodized Aluminum part is easy to fall off from Cap,
Since Cap itself has never dropped out
I think that there is no problem in function.
View detail
Fashionable from the feet
Easy to change
There are few people who notice it completely self-satisfied Custom but texture is up and it is very good
The price is a bit difficult but the satisfaction level is outstanding
View detail
To a little Custom
Quantity : 1 Set of 2pcs. In Quantity : Buy 2 Set.
Two in Front's Caliper, one in Rear's Caliper and one in Brake master.
Small goods, but it is casually conspicuous so I wish a little fashion.
However, if the price is a bit cheaper it is a full mark w
View detail