Reviews
This is the Attachment Bar
I bought the handlebar because it was inexpensive and I thought it would be easier to pull up my leg when I had a minor fall or when I was standing on the ground. I tried to pull my leg out to wake it up, but my body was not strong enough and the motorcycle was so heavy that it lay right on its side.
The Instruction Manual for the product includes It's not that durable." But I didn't know it was this weak...
It is likely to be used as a base to install a Fog Lamp, etc., but it is not so strong and flattering that it will bend if you hold it by hand and pull it. "Engine Guard" This was not a product that could be called a Attachment Bar It is
I replaced it with one from SWMo-Tech, although it is a bit more expensive.
View detail
If only it were a little cheaper
I am glad that they have repair parts. I wish it was cheaper... View detail
Installation Bolt is …………………
The assembly work was easier than I had initially expected. However, it took some effort. The instructions for installing the tank guard suspension parts say to use two bolts, but when you insert one bolt, the hole for the other bolt is out of alignment, so it won't fit. Hepco&Becker is a manufacturer in Germany, and recently the quality of manufacturers in Germany has dropped to the level of China. View detail
Fits: SUZUKI V-STROM250, SUZUKI V-STROM250, SUZUKI V-STROM250
VSTROM250
It has been 9 years since I rode a MTMotorcycle, so I requested the installation for safety and peace of mind. View detail
Fits: HONDA CL250, HONDA CL500, HONDA Rebel250, HONDA Rebel250, HONDA Rebel250, HONDA Rebel500
Simple but sturdy and stylish
SP Tadao's inner type exhaust pipes are much thicker than the standard ones, and because they protrude forward, all low type engine guards interfere with them. So we were looking for something that would not interfere.
When DAYTONA was participating in the "DAYTONA" event, I consulted with them and they showed me the one on their Demonstration car, and I thought this one would be Large and durable, so I purchased it. I was satisfied with the Matte Black paint and the design that fits the SEdition.
The installation was easy, and the precision of the auxiliary rubber to prevent scratches on the pipe was high. I was impressed that the actual installation took less than 30 minutes if you have the right tools. Even if you can't install it by yourself, the labor fee at a motorcycle shop will probably be cheaper.
Unlike the Low type, it is not the first thing to hit the ground when you run off the road, so it is better to think of it as something to guard the engine. If you are worried about the effect on the exhaust system when you run off the ground, we recommend you to use it together with the Exhaust System Guide.
A Camera can also be attached to the Pipe for those who want to shoot at low Angle.
View detail
Fits: HONDA NC700S, HONDA NC700X, HONDA NC750S, HONDA NC700X, HONDA NC750X TypeLD, HONDA NC750X
Sturdy and surprisingly inconspicuous
Looks surprisingly unobtrusive and Parenthesis is good. View detail
Stainless Steel and rustproof.
Material:Since it is made of Stainless Steel, it can be used under the engine without worrying about rust. I thought it would be quick and easy to install, but it was difficult to fix the special nut at the bottom of the engine, and it took longer than expected. Satisfied with the product itself View detail
Feeling of security
I feel that the center of gravity has been lowered slightly, and I feel more stable. It would be best not to have to take care of it, but it is still a relief to know that it is there in case of an emergency. View detail
About DAYTONAE Engine Guard
I was torn between products from various manufacturers for the Engine Guard, but DAYTONA's Engine Guard was just the right size, not too large and not too small. 。 A couple of days after installation, I had a bump when I stopped and fell over, but thanks to the Engine Guard, the Handlebar, Clutch lever, Mirror, etc. were not damaged and the Large change was saved!
The rigidity is probably quite good.
View detail
Engine Guard
[How is it used?
From city driving to touring
Was the one you received as per Image?
Almost as per Image
Was the installation difficult?
I asked Shop to install it.
How was your experience with it?
Increased peace of mind.
View detail
Saved my CASES!
The engine guards did as expected! They saved my cases when going on a trip and a couple slow speed falls...(turning a sport tourer into a duel sport). They were easy to install once I studied the instructions (purely in Japanese, I think); just be sure to pay attention to the pictures. Although, it would be nice if the instructions were in different langauges. View detail
I got beat up… (Tears)
I was excited to purchase ZETA's Under frame to customize my new model CROSSCUB110 to make it look like a SCRAMBLER. I removed the main pipe center cover according to the instruction manual, removed the handlebar post cover and front cover, and then removed the main pipe cover to complete the cover removal. I had to be very careful not to break the cover, so I had to use a lot of nerve (sweat). Next, the bolt of the headlight bracket was removed, the bracket was temporarily attached, and the bolt of the footpeg was removed to complete the preparation. Finally, I aligned the main pipe connection with the bolt position on the footpeg in order to install the main pipe, but … the screw holes did not align!
I contacted DirtFreak in a panic. The Parts I purchased cannot be installed on the New ModelCROSS CUB." And that … We are considering developing one for the New ModelCROSS CUB. and it turned out that I was completely brave. I gave up and decided to wait for the Under Frame Kit for the New Model CROSS CUB. I recommend everyone to check the compatibility with the parts of the previous model before purchasing a New Model.
*All ratings are in the middle because the installation could not be completed.
View detail
HONDA Front Side Pipe Product # 08P71MKWD00 NC750X 2021 21 RH09-1000001
Preferred the OEM Crash bar. The installation guide comes with the production. Need to download from the URL provided. Others may prefer 3rd party Crash bar which can cover the Engine and Radiator View detail
New car installation
It was installed at the installation store when I purchased my new car.
May be difficult to install by yourself
View detail
I feel protected.
The texture is good, and the E/G area is well protected. I had a problem with the plug hole in the pipe, but it's nothing to be concerned about.
Installation is not difficult as long as the through bolt in the Center Stand section is inserted.
View detail
beautiful & practical engine guard
Installed the Active engine guards on 2019 honda cb1100RS. the fit and finish is perfect and the engine guard is very high quality. highly recommended! View detail
Fits: SUZUKI GSX-S1000, SUZUKI GSX-S1000F, SUZUKI KATANA, SUZUKI GSX-S1000GT
Parenthesis good!
The design is very Parenthesis.
But I feel it is a little expensive. However, it is well made for the price.
View detail
Protective Crash Frame
About quality and texture: aluminum and single wielded together to form the frame - Great About the feeling of use Products to buy together: None Difficulty of installation: 6/10 - require jack to push up the engine Cost performance and comparison with other products: Normal - around the same cost About shipping and packaging; PERFECT Any concerns, cautions, or advice when purchasing: The instalation was not perfect, the hole on the frame required to be widen as this messed up the alignment of the screws. View detail
Fits: BMW RnineT Racer, BMW RnineT Pure, BMW RnineT, BMW RnineT Urban G/S, BMW RnineT Scrambler, BMW RnineT Urban G/S, BMW RnineT Scrambler, BMW RnineT Racer, BMW RnineT Pure, BMW RnineT
Standstill protection-Engine Guard
[How is it used?
RnineT is for a low center of gravity, so I knew it would be hard to stand and jostle, but I installed it just in case.
It's been six months since the car was delivered and we haven't had to take care of it yet. (⌒∇⌒)
Was the one you received as per Image?
We had the standard item from Dealer installed as is.
I was worried about the one from rizoma, but this one seemed to be more firmly guarded around the head.
I had this installed because I had the actual product.
I was not particularly concerned about Engine Guard.
Was the installation difficult?
I asked the Dealer at the time of delivery, so the degree of difficulty is unknown.
Probably, it should be Bolt On because it is a vehicle-specific product.
How was your experience with it?
Luckily, we have not been taken care of yet.
But this bar has more to offer than just serving as an Engine Guard.
I've seen people use it as a Mount for Fog light and ActionCamera.
There may be times when you use it that way….
[Included Parts:were they on?
I don't think there was any problem.
The optional Wonderlic ProtectionPad for Engine Guard/Tank Guard (item no. W35833-002) can be installed.
[Was there anything that disappointed you?
This does not mean that they are disappointing, but they do look a little stiffer.
That is cool, so I guess it is a preference.
I am planning to install an Under Cowl in the future, and I am wondering if I should remove the Engine Guard at that time, or keep the Engine Guard installed and install the Under Cowl. (I heard there is such an Under Cowl. I'm searching for more information now.)
View detail
สวยน้ำหนักเบาราคาไม่แพงแก้จุดบอดถ่ายรูปข้างซ้ายไม่ขึ้นได้เลย View detail