Reviews
I think black looks better
I have been looking for it for a long time and finally let me see it. There is no difficulty in the installation process. Just unscrew the original mirror screws and install it directly. I prefer the black appearance. It is low-key and chic and matches the car very well. Moreover, its material It will not rust, which makes me very satisfied, and I may never find a better product than it. -------------------------------------------------- -------- After looking for it for a long time, I finally saw it. There was no difficulty during the installation process. As long as the original mirror screw was unscrewed, I could install it directly. black appearance. It won't rust, which makes me very satisfied. I may no longer find a product that is better than it. Powered by Google Translator View detail
High! But cool!
It's just as the Title says, the Anodized colors are really beautiful and upscale!
But it's expensive lol Slotted screwdriver was used to install it. It's so cool, it's a Recommendation!
View detail
It is easy to install. to Racer's look and feel.
Security parts for CBR250RR MC51 for Sports competition (Mirror) I purchased this product for the removal of the
The mirror had been removed and the scratches on it were…not parenthesis looking good, so the purpose was to cover them up.
The effect was perfect and Parenthesis improved.
We have not experienced any problems with price or quality.
Order of installation
Remove the existing Mirror with a .5mm Hex.
Attach this product with a 4mm Hex.
Returning is easy in the reverse order.
It's not tight enough for the Hexagon Bolt to lick.
We feel that Bolt's condition should be closely monitored, assuming that it will be put on and taken off many times.
View detail
CircuitSpec.
Used to hide the hole after Mirror was removed during Circuit run.
The Cover itself is thin, but it is sufficient to cover the hole.
View detail
Puch Mirror Cap
I bought this to remove Mirror on Circuit. The texture MATCHED the car body and the look was REFRESHING. The price was reasonable, so it was good. Installation was easy as I only need to fix it with Screws and Fitting was no problem. View detail
Used for Jc92 grom.
Purchased for installation of bar end mirror
I don't have any comment, but it was gold color.
This and a selection of thoughts
Casually, Mr. Mukawa's Laser engraving is a nice Accent.
View detail
Fits: HONDA CB1300SUPER BOLD'OR, HONDA CB1300SUPER BOLD'OR SP, HONDA Rebel1100, HONDA Rebel1100 DCT
Mirror Fill-in
Mirror was changed to Bar End Type, so it was installed for preventing Rust in the hole and appearance.
No problems were encountered, and the product was installed with good appearance.
View detail
high
I bought this in preparation for bar end mirror replacement.
Quantity:I thought it was 1 set of 2pcs. but it was 1pc. and it was Shock.
I honestly felt that 1pc. was too expensive.
View detail
Mirror hall concealment
When I tried out the bar end mirror, I installed it, and I was a little concerned about the bump with Cowl, but it was acceptable. View detail
Fits: HONDA CB1300SUPER BOLD'OR, HONDA CB1300SUPER BOLD'OR SP, HONDA Rebel1100, HONDA Rebel1100 DCT
Made with reliable DAYTONA
I bought it because I made UnderMirror.
I bought both Normal Thread Screw and Opposite Thread Screw and the screw accuracy was perfect.
View detail
Fits: HONDA CB1300SUPER BOLD'OR, HONDA CB1300SUPER BOLD'OR SP, HONDA Rebel1100, HONDA Rebel1100 DCT
Made with reliable DAYTONA
I bought it because I made UnderMirror.
There are various Chinese and other products available, but I am glad I chose DAYTONA products.
Screw accuracy is also perfect, which is different from cheap ones.
I would appreciate it if the price was a little lower. (Lol)
View detail
I'm not sure the cosmetics are good.
The construction was not good. It is not that bad, but if you are not careful about tightening with PeLePera, it may be deformed during installation. Product Name TRACK DAY." The Image may be used as a lid when Mirror is removed in Circuit, rather than for daily use as in the following example. View detail
Good appearance and texture.
It is installed on a ZX-6R (2012) used only for circuit driving. The screw hole position is accurate and easy to install. It looks beautiful and is a large size. View detail
Fits: DUCATI PANIGALE V4 SP, DUCATI PANIGALE V4 S, DUCATI PANIGALE V4, DUCATI PANIGALE V2, DUCATI PANIGALE V4 R
Simple design and does not destroy the Cowl's forme even when installed!
The reverse side of the product (the mounting surface) is machined to match the curved surface of the Cowl, which I think is very elaborate! I used to use a Mirror Hole PlugPlate from another manufacturer, but it was not curved and both ends were floating, but this product can be installed on the curved surface of the Cowl EXACTLY like that! View detail
usually
The texture is normal and a bit expensive for a Mirror filler. View detail
Fits: HONDA CB1300SUPER BOLD'OR SP, HONDA Rebel1100, HONDA Rebel1100 DCT, HONDA CB1300SUPER BOLD'OR
It is not cheap.
There is no functional significance.
It just looks good.
Quantity:2pc. I thought it was the price of a set, but it was the price of 1 pc.
Quantity:Pair (for Left and Right) Installed 1 pc. at a time. Self-sufficient.
View detail
I bought it again, but it was still too expensive...
I bought a new Mirror hall stash when I reinstalled the bar end mirror, but it was still too expensive.
I like the texture, though.
View detail
TANAX Napoleon: -- stay-boots product number: -- vehicle type wide use goods details - corresponding to SA-12 merchandise information -- a mirror attachment -- the protection from dust etc. - A screw adapter etc. can be hidden and a dress-up up is sim
TANAX Napoleon: -- stay-boots product number: -- vehicle type wide use goods details - corresponding to SA-12 merchandise information -- a mirror attachment -- the protection from dust etc.
- A screw adapter etc. can be hidden and a dress-up up is simply possible.
View detail
Fits: SUZUKI GSX-R600, SUZUKI GSX-R750, YAMAHA MT-07, YAMAHA MT-09, YAMAHA MT-10, APRILIA CAPONORD 1200, APRILIA DORSODURO1200, APRILIA TUONO V4 1100 Factory, BMW F800GS, BMW F800R, BMW R1200GS, BMW R1200GS Adventure, BMW S1000R, BMW S1000RR, DUCATI DIAVEL, DUCATI HYPERMOTARD1100EVO, DUCATI HYPERMOTARD1100EVO SP, DUCATI HYPERMOTARD1100/S, DUCATI HYPERMOTARD796, DUCATI HYPERMOTARD821
It might be a good idea to replace it with a bar end mirror.
I think the price is a little high.
It is necessary to seal the OEM mirror hall to replace the bar end mirror, but I think it is also necessary to fix the MONSTER S2 Fluid Tank with a mirror hall.
Material:Because it is aluminum, there is a high likelihood that it will be tightened with too much force or licked during removal.
This is the second time I have purchased this product, but it was licked on removal and needed to be replaced.
A little It will be dressed up around the Handlebar.
I have purchased Red before and this time I chose Red again.
View detail
Fits: KAWASAKI Ninja400, KAWASAKI NinjaZX-25R, KAWASAKI ZX-4R SE, KAWASAKI ZX-4RR
Mirror Hole Cover
I bought this for a Circuit race. I think I can manage without it, but …… it looks better than leaving it off.
The color is black, and it is plain, but the texture is good, and the casually engraved logo mark is discreet, yet moderately assertive.
I can't use it on public roads, so I'm looking forward to the driving sessions.
View detail