Reviews
Fits: YAMAHA SR250, SUZUKI 250SB, HONDA 250T LACustom, HONDA AX-1, HONDA CL135, HONDA CL350, HONDA CL72, HONDA CL77, HONDA CM250T, HONDA CM400T, HONDA CRM250AR, HONDA CRM250R, HONDA FTR223D, HONDA FTR250, HONDA GB250 CLUBMAN, HONDA GB400TT, HONDA GB500TT, HONDA MT250ELSINORE, HONDA MTX125R, HONDA MTX200R
Does not fit the KL250 Sherpa.
The Manufacturer's list of compatible models says it is compatible with KL250 Sherpa, but that's too long.
If installed normally, there will be excess
The quality of the product itself is not bad, so I think it will be fine for cars with longer forks.
KL250 Sherpa's Fork outerTop to bottom of trident is 240mm
Catalogue value WheelTravel is 230mm
100mm remains above the Outer even when shrunk the most without processing.
This would make Stroke about 130mm.
If it was just for Inner Tube protection purposes, it would be fine, but I don't think it is, so I cut it off, even though it will look very ugly lol.
In hindsight, I lightly regret that using the top half wouldn't have made it so ugly.
However, even in this state, the Stroke will be reduced by about 50mm
Boots itself becomes Bump rubber.
Even other companies' products that say they are compatible with KL250 Sherpa are quite long.
Would it be better to just use a shorter product with more extension?
Maybe I'm losing my mind, but I'd like to find a good product!
I bought it + even processed it so I'll be using it for a while lol.
View detail
Fits: HONDA VFR750, HONDA VFR800, HONDA VTR250, HONDA VTR1000 SP-1 RC51, HONDA NSR250R SE, HONDA NSR250R, HONDA NSR250 MC18 MC21, HONDA CBR250 MC19 MC22
Bad accuracy
Purchased as a replacement for a Gasoline leak from an OEM cap.
The installation itself is completed quickly with three Bolts.
The lid was slightly lifted, but since it was an Other Brand Product, we thought it was inevitable.
However, once the lid is opened, it is so inaccurate in its construction that no matter how hard it is pushed in, it will not lock and the key will not pull out.
Rubber packing was the same shape as OEM, so I used it to replace the OEM cap. The Gasoline leak was fixed.
It would be good to use it as a parts holder for Packing to be used for OEM, but it is not cosy to pay almost 4,000 yen just for Packing.
View detail
Fits: BMW R nineT Scrambler, BMW R nineT Racer, BMW R nineT Pure, BMW R nineT
I think it needs to be improved!
After touring (about 5-6 hours), when I was wiping it dry, I found the pad peeling off, which seems to be due to the adhesive sticking to the tank and the peeling between the pad and the adhesive. View detail
Is this how it is?
I was installing a Washer and bleed air with the specified Torque.
Oil came leaking from between the washers.
The packaging was good, as each piece was carefully packed.
The product was a waste of money for this.
View detail
Fits: YAMAHA MT-07, YAMAHA MT-09, YAMAHA MT-10, YAMAHA MT-03, YAMAHA MT-125
Rose variation in quality is expected.
Mounting BoltMirror Bracket has been hammered in, but it is not completely hammered in, and even when the nut is tightened, about 1mm of bolt is visible on the top of the nut, which is not good looking.
Rose variation in quality is expected.
I would like to return it, but I have opened and installed it and it is Garbage.
View detail
Fits: KAWASAKI W650, KAWASAKI ZRX400II, KAWASAKI ZR-7/S, KAWASAKI ZEPHYR750, KAWASAKI ZEPHYR750 RS, KAWASAKI ZEPHYRX, KAWASAKI ZEPHYR400, KAWASAKI BALIUS, KAWASAKI BALIUS2
Will not pass inspection.
After installing this Headlight, I went to testCenter to adjust the optical axis.
Two irradiated points, one with a huddled area and the other with a blurry area.
I was told that I could not inspect the car.
View detail
Fits: BMW R nineT Scrambler, BMW R nineT Racer, BMW R nineT Pure, BMW R nineT
No durability of Double-sided Tape
It came off in three days.
Just Material:Rubber, so no fading …
View detail
Fits: Others Compatible with Hose inner diameter 6mm.
unspeakable quality
Gasoline leaks from the joints and is completely unusable. We wanted to return or exchange it, but we couldn't get anywhere with EyeNet. As a result, UeBig was kind enough to return it to us for a refund. Webig is wonderful. View detail
Fits: Others
Gasoline leak!
Gasoline leaked when installed and Gasoline flowed.
Quantity:2pc. No both Set.
I bought four of them.
Gasoline confirmed that it stops when removed.
To put it bluntly, it doesn't work.
oRing seems to be small.
I called Manufacturer and no one answered.
View detail
Unavailable. I think I'll throw it away.
I bought it, and when I tried to install it, I couldn't connect the Case to the Clamp. It is not fixed. I can't use it. Should I glue it or tape it? Even if I do that, I have to open the Fastener every time I take out my phone and put it in. It's a hassle. It was a product worth the price.
I will never purchase from this Manufacturer again.
View detail
Fits: HONDA jade, HONDA VTR250, HONDA CB-1, HONDA CB400SF, HONDA CB400SF, HONDA CB1000 SF (Big One), HONDA CB1300 SF, HONDA HORNET600, HONDA HORNET900, HONDA HORNET250
Requires modification for installation
There is no waterproofPacking between Lens and Body.
Bulb Socket is not well fixed and is playing rattling around inside.
Some car models require modification to the base of the Blinker mounting area.
I did not install it because I was not sure about its durability.
View detail
Fits: HONDA CB-1, HONDA VTR250, HONDA jade, HONDA HORNET900, HONDA HORNET600, HONDA HORNET250, HONDA CB400SF, HONDA CB1300 SF, HONDA CB400SF, HONDA CB1000 SF (Big One)
Modifications are assumed to be Large.
The first Valve that comes with it is a 5W Wedge bulb even though it is a Blinker.
To replace it with a 21W Single Bulb, a Large modification of the Socket section is required.
There is no WaterproofPacking between Body and Lens.
In the end, it was not installed.
View detail
Fits: HONDA CB750, HONDA CBX250, HONDA NS250, HONDA NS400, HONDA VF400, HONDA Forza(MF10), HONDA fusion, KAWASAKI Eliminator 400, KAWASAKI Eliminator 400, SUZUKI DF200, SUZUKI GSX400, SUZUKI RF400, SUZUKI RG400, YAMAHA XZ400, YAMAHA vino, SUZUKI SV1000S, SUZUKI SV1000, KAWASAKI ZZR1200, KAWASAKI ZX-12R, KAWASAKI 1400GTR
I want to cancel an order, but I don't know how.
I want to cancel an order, but I don't know how.
I don't know where to inquire, so I am writing here, even though it is out of place.
I want to Cancel the order before it is shipped, but I am having trouble doing so.
View detail
![[AEBS] Bleed Rubber Cap](https://img.webike-cdn.net/catalogue/images/37498/63365_1_TS.jpg)
What?
The product itself is just an ordinary Rubber cap
However, after installing it on the vehicle, it faded in about a week, even though I covered the motorcycle with a shade cover to prevent light from hitting it. It was like a light vermilion color. It faded too fast. And it cracked in about a month.
View detail
Fits: SUZUKI GSX750 KATANA, SUZUKI GSX1100S KATANA (KATANA)
The quality is worth the price
It cracked in one run from the mounting area
It has become a cheap purchase
Because the transparency of the screen is good, it may be good for those who don't put out the speed too much It is not
View detail
Fits: HONDA CBR250R (MC17/19), HONDA NC700S, HONDA NC700X, HONDA NC750S, HONDA NC750X, HONDA fusion, HONDA fusion, YAMAHA Cygnus X, YAMAHA Cygnus X SR, YAMAHA SMAX, YAMAHA MAJESTYS, YAMAHA MAJESTY125, YAMAHA MAJESTY125, SUZUKI GSX400, SUZUKI RF400, SUZUKI GSX400, HONDA VALKYRIE, HONDA VALKYRIE, HONDA MAGNA(V-TWIN MAGNA), HONDA MAGNA(V-TWIN MAGNA)
Quality matters
A quick glance before I opened the package showed it was chipped It was even worse from the side I asked for an exchange or return of the product, without even opening the package This is a very nice product I'm not sure if this is a good idea View detail
Fits: YAMAHA XJR400, YAMAHA XJR1300, YAMAHA XJR1200, YAMAHA SRX400, YAMAHA FZR400, YAMAHA FZR250
It's just taking shape
If you're going to buy one, be prepared to process it If you think you can pimp it out, you're wrong
First of all, the Large size of the Wiring Evo-Si is different from the OEM product The inner bracket is different from that of the OEM product, so the bulb is different If it is not, it will not relay
In the end, I used only the Body and machined and installed the OEM internal Bracket
Lens also came off easily just by removing the Screw There is no doubt that water can easily get into it I used a liquid Gasket to deal with this
View detail
looks no good
I was tought this is looks similar than original seat cover ,but is not. Looks very shit ,what for this plastic line on it? View detail
Fits: HONDA NC750X, HONDA NC750S, HONDA NC700X, HONDA NC700S, HONDA CBR250R (MC17/19), HONDA CBR1000RR, SUZUKI GSX-R750, SUZUKI GSX-R600, SUZUKI GSX-R1000, SUZUKI GSR600, SUZUKI GSR400, HONDA CBR250RR (MC22), HONDA CB1000 SF (Big One), HONDA CB1300 SF, HONDA CB1300 SF, HONDA CB1300SUPER BOLDOR, HONDA CB400SF, HONDA CB400SF, HONDA CB400SF, HONDA CB400SF
Really?
It was listed as inspected, but the knee slider is wobbly!
Either the Screw hole was thicker or the Bolt was thinner, and it was in the bag in spotted form!
I applied screw lock agent and installed it, but it fell off with a little shock It's a good thing …
Also, the contents of the Rubber will be blown out, and if you step on it too hard, it will be flattened
I'm disappointed
I don't want to be small-minded
View detail
Fits: HONDA monkey, HONDA monkey, HONDA monkey, HONDA monkey, HONDA GORILLA, HONDA GORILLA, HONDA GORILLA, HONDA GORILLA
Cheap and bastard
When I opened it up, I found that the footpegs were both angled quite high! It took quite some time to cut with File and to make it satisfactory When it installs, Left Side seems to have gone out a little, but since there is no obstacle to operation, it does not mind Hmm If you keep on running for a little while and look at it, before you know it, the footpegRubber on the Right will be gone I did I went back the way I came and found the Rubber and found it again and it was loose enough to move by hand If you wrap the tape around the Shaft so that it won't come off, it will be about the same place as the Left Side Although you can only screw it in up to the limit, it's not going to be easy to pull out, and Quantity:Pair (for Left and Right) The Balance of the Balance has improved and I will continue to use it as it is
If you care about accuracy and looks, buy the OEM
View detail