Reviews
Thank you
Easy to install
The sound is also good
I am able to run comfortably (* '艸)
If there is opportunity to purchase again thank you ♪
View detail
Fits: HONDA CRF250M, HONDA CRF250L
it's the best!
At first, I also considered fmfQ 4, but there are also housing circumstances, so it is extremely small Ball Full type
I also chose this.
I changed the Exhaust pipe to SP Tadao's PowerBox,
Band to tighten the part connecting Exhaust pipe and Silencer
Only note that diversion from OEMSilencer
if (LOL because there is no Instruction Manual) I attached it without problems.
Sometimes called the ultra Small Ball Full type, the volume is slightly bigger than the OEM
I think that it is extraordinary and it is not particularly noisy.
Sound quality is emphasized on bass and very comfortable.
It was lighter than OEMSilencer
Sometimes, running started to be quite light.
Acceleration power also improves, and when accelerating to Smooth
I can finish in 2nd speed in no time to about 50km.
I think that there is also the effect of Tadayo PowerBox, but also compared to NORMAL a feeling of jerky
I almost cared. Along with that, slow stickiness is also improving.
It is cool to the highest by Match Stylish looks to Off cars.
Performance, Sound, Looks None Large Satisfied products !!
Exhaust System We created a comparison video of sound, so please refer if you do not mind..
https : / / www. youtube. com / watch?v=3QwazR6m37U&t=3s
View detail
Quiet, polite construction, cheap. I was waiting for such an outside exhaust chamber
To relatives K2tec's TZr 250 (1KT) The lowest price model for MODEL (Over 40,000) There was a person who bought it, from that person "If you're Street youth, this Manufacturer! And will receive purchase after a tremendous push.
To speak frankly "It is not Race use, I do not want to turn it, I want to run gentle and gentle to the Engine" But if you would like to put an Exhaust Chamber outside the company, you can quite recommend it. It may be Level you do not want to tell people as satisfaction (Lol)
For Exhaust Chamber stronger than 20,000 yen, I am doing a good job to admire it.
The impression
- Leak prevention Coking is done on the border of the outer peripheral joint of Aluminum silencer.
- Exhaust Chamber Side (Male side) There is a with Stages in the Silencer insertion part, and we are conscious of exhaust leakage prevention. The insertion is quite a little.
- The BALI of the joint plate of the iron plate is carefully scraped off, and the expansion room without violent irregularities is beautiful
- The thickness of the Flange is about 5 mm, it seems to be quite durable to set it to Flange of Exhaust Chamber outside the company's mission.
Impossible point
- Heat resistant Clear paint!
Every paint Manufacturer has a heat-resistant Clear of at most 200 ° C, that is, immediately before the engine near the Engine or the expansion room, it will immediately deteriorate and cause rust...
- Instruction Manual (Parts list) Not there
Even if there is a missing item by mistake in this, I do not understand. I would like to have a minimum parts list...
that's all.
In my case, Clear paint of Exhaust Chamber and Flange is painted with heat-resistant Black of Okitsumo after peeling with paint peeling material beforehand.
Stainless Steel It is not Exhaust Chamber enough to watch over the welding traces carefully like the hand winding type, or to be able to watch Bird...
Although it is the performance of the key, even with my RZ Pon attachment of the pretty CUB setting, I feel the difference of Torque enough to experience 4000 to 7000 RPM compared to the previous Exhaust Chamber outside the company. Feeling that the low revving Gozugu became Flat. (Of course there is no low to medium rotation Torque as low as OEMExhaust Chamber)
I felt it was slightly weaker than that of high rotation, especially 10 00 ~. It was not that I could not enjoy the 2st likeness but it became easy to ride. Large I'm satisfied..
View detail
The pipes fit my 1973 H2 easily and the quality is very good. They clear the stock fender fine when the forks are fully compressed. Granted there are other pipes with more clearance, but that does not matter simply because they clear easily enough. The di
The pipes fit my 1973 H2 easily and the quality is very good. They clear the stock fender fine when the forks are fully compressed. Granted there are other pipes with more clearance, but that does not matter simply because they clear easily enough. The dimensions fit the aft frame attachment points exactly. K2Tec really should supply rear isolation mounts (rubber mounting) with hardware where they attach on the rear frame, some people may have difficulty making something up.(That's why I gave a 4 star rating.) Hard mounting will lead to cracked brackets eventually. The aluminum mufflers are crafted to a high standard. This system is a great buy and I'd do it again. View detail
Attached to MT-07
Because MT-07 Radiator is exposed to Aluminum
I thought that it is absolutely necessary and purchased.
Hey Radiator and Size were not good for this Core guard.
I put it in a tender and slightly bent feeling.
Well, once installed, there was no problem separately.
View detail
It looked cool but ...
Manufacturer who had many images of 2st chambers, but there are 4sts too!
Installation is simple. Remove the OEM Silencer and Heat Guard and insert the supplied Color and attach the Body. Use OEM Band as it is.
I like the appearance and the volume to suit my taste considerably.
However, there is a little exhaust leakage from the installation part of OEMExhaust System and this product. I switched the orientation of Color, but it does not change. I am using it without being anxious because it is not a ridiculous item.
I think that it is a pretty good product except for this one point.
View detail
Fits: Others
Style and lightness are perfect.
I bought it for Fitting to YOSHIMURAExhaust pipe.
Style is a powerful Long Silencer and the burning color of Titanium is also beautiful and satisfied. I ordered the position of Spring's Hook from vertical to horizontal. I was able to do this free of charge. Also, the Emblem's Plate seems to be Rivet usually, but ordered without Emblem. Emblem was not attached although it was said that compensation is impossible.
Sound is pretty annoying if there is no Baffle.
Idling is stabilized if you are missing it, but if you attach Baffle, Idling becomes unstable if you remove Baffle. Air Screw adjustment is necessary, but I am having fun with Baffle attached.
If you would like to have fun without Baffle, you may be right just choosing Smaller Size for inner diameter.
View detail
I ordered these expansion chambers just before Christmas and they arrived in a just a few days well packaged and no marks, finish is excellent as is the design, not to mention the awesome sound Thank you Webike and K2TEC
I ordered these expansion chambers just before Christmas and they arrived in a just a few days well packaged and no marks, finish is excellent as is the design, not to mention the awesome sound Thank you Webike and K2TEC View detail
Cospa is good!
Purchased from RZr 250 and price, appearance.
As an impression of wearing, it is obviously lighter than OEM. Moreover, I feel that elongation at high rotation has improved somewhat without losing Torque at low rotation.
From now on MJ will also be looking forward to how much it will change.
I did not expect much from the price, but I was satisfied.
View detail
Fits: KAWASAKI KH400, KAWASAKI 400SS MACHII (S3)
Appearance, performance Almost satisfied
I was wondering which of the Exhaust Chamber should be long for a long time, but I made it to the cross chamber of k2 TEC of medium low speed Emphasis on Torque.
Considering the appearance, it is the mirror surface of Stainless Steel, Type-2.
The sound is not too noisy, I think that it is good with a slightly higher sound.
I feel that mid-low speed Torque is up a little bit.
(Carburetor is NORMAL, Air cleanerSpec. is)
Installation is easy, but in my case I interfered slightly when raising the Side Stand, so I removed a 2 mm thick Rubber on the Bolt part of the STAND.
(According to the shop, there are individual differences, so there are also things that will not interfere)
And of course, Center Stand : It is ×.
View detail
Fits: Others
Almost satisfied
In the same Manufacturer, I chose the longest. The reason for choosing the longest is quiet and reason is that it is not too noisy. Naturally Baffle is used as it is removed, the impression is Punching inner diameter 50 and the total length is 620 so moderate volume (Individual differences) is. I do not like After Fire altogether. By the way Baffle is too quiet and not enough.
(The vehicle inspection is going through, is not it?) The reason why I made it to star 4 is that the Rivet division is somewhat collapsed. It will be useless, though.
View detail
Fits: KAWASAKI KH500, KAWASAKI 500SS MACHIII (H1)
This is the first review I've ever written,ya really. But these pipes are the most beautiful piece of workmanship on any motorcycle product I ever seen,they look like jewelry. I have not installed them yet nor do I know how they will sound or work on my
This is the first review I've ever written,ya really. But these pipes are the most beautiful piece of workmanship on any motorcycle product I ever seen,they look like jewelry. I have not installed them yet nor do I know how they will sound or work on my Kawasaki H1 500,but by the looks of them I am sure all will be great... The K2tec pipes are mirror polished stainless, the welds are beautiful. I have built several stainless pipes for my Custom choppers from scratch and the work required to produce 3 exhaust of this quality and ship them from Japan!!! Yee Haw!!! Very professional people to deal with, I was skeptical at first, not now. Thank You. View detail
Fits: KAWASAKI KH500, KAWASAKI 500SS MACHIII (H1)
Just received my chambers, they were not in stock at placement of my order and webike immediately notified me and told me the length of back order, I ordered anyway and waited the 2 months.ABSOLUTELY worth it! These look awesome ! They fit perfectly ! The
Just received my chambers, they were not in stock at placement of my order and webike immediately notified me and told me the length of back order, I ordered anyway and waited the 2 months.ABSOLUTELY worth it! These look awesome ! They fit perfectly ! They were shipped within a week of webike receiving them, packaging was excellent ,and they are extremely well made. The fit was without any tension ,welds are perfect and design is tucked well under the bike AND allows the kickstand to be retained .I am extremely pleased with them for the cost. View detail
Fits: KAWASAKI 750SS MACHIV (H2), KAWASAKI KH750
OK,here is the initial short review on the K2tec pipes.The are beautifully made !!! The welds look really good and they fit great on the bike.They give plenty of room for the shifter and rear brake pedal !!! When I bought them the were shipped to the hous
OK,here is the initial short review on the K2tec pipes.The are beautifully made !!! The welds look really good and they fit great on the bike.They give plenty of room for the shifter and rear brake pedal !!! When I bought them the were shipped to the house within a week from Japan,they came undamaged and in perfect shape !!! Out of all the chambers I have bought and especially coming from Japan they are a steal for the money !!! They sit a little lower on both sides of the frame which gives you great room for the shifter and brake but if you love the corners at 100 mph,that may be an issue draggin the pipes.This is the first set of chamber I have owned that the stock kickstand does not hit the pipe !!! They bolted right on and fit perfect without having to modify anything……...Now,the only issue I have with them is they could have done a better jobs with the bend off the head pipe !!! They remind me of the old FBG pipes and there is not that much room between the center pipe and the fender maybe an inch or so !!! My front seals are leaking a little but even with them not leaking if you get on the front brake hard I think you may hit the front fender !!! I did not put them on with new copper gaskets and tighten them all the way,as I just fit them for now so when I get them on for good I should know !!! I may have to go with the shorter Z1R fender if that if that is the case !!! Over all they are beautiful pipes and I am very happy to have this set !!! View detail