Reviews
Fits: Others A-FORCE RS, Others FF-COMFORT, Others X-ROAD
Seriously, it doesn't fog up.
It was easy to replace the Visor with Standard Equipment's Visor. View detail
There is a LARGE difference between with and without!
The chin portion protrudes from the helmet shape, so it was easy for wind to get caught in the helmet, but this has considerably eased the problem.
It is essential for winter and high speed driving!
View detail
This is the best
Used for AraiTour cross
ManufacturerOEM Parts interfere when opening and closing, even though they are exclusive parts.
This product is totally stress-free. And it's easy to reupholster.
Although often neglected because of WINS, FOGWIN is above other manufacturers.
I think it is PARTS.
There is a slight chemical smell, but it disappears after a week or so.
I chose Standard because it is AdventureStyle's Shield.
If you can put up one for Adventure, I'd like to try that one too.
Quantity:Pair (for Left and Right) If that bothers you, you can see the edge of the Seat on the underside of the
It wouldn't have been suitable for driving on public roads in the first place.
View detail
Fits: その他 GT-air II, その他 Z-8, その他 NEOTEC II, その他 J-FORCE IV, その他 J-Cruise II, その他 VZ-RAM, その他 CT-Z, その他 SZ-G, その他 F-17, その他 AERO BLADE V, その他 KAMUl-III, その他 SHUMA, その他 RYUKI, その他 EXCEED, その他 AVAND II, その他 A-FORCE RS, その他 G-FORCE SS, その他 FF-COMFORT, その他 A-FORCE RS JET, その他 G-FORCE SS JET
Once you use it, you can't stop.
When I purchased the Helmet from WINS, the one I got as a bonus was ruined, so I peeled it off.
It was so badly fogged up that I realized how much this product had helped me.
The transparency is high and there is no change at all in visibility even when the lens is worn.
View detail
Value for money! I am happy to get CarbonHelmet at a reasonable price.
Air ventilation is quite good. It did not cause my hair to steam. The Inner Shield is so close to my face that if I lower it fully, it hits my glasses and cheeks, so I try not to lower it all the way. I am satisfied with the CarbonHelmet because it is inexpensive and looks good for a carbon helmet. It is hard to evaluate the strength of this helmet because I don't want any situation to occur. View detail
Lightness and cosmetics
This is the third Helmet from WINS, and it is quite good in terms of comfort, lightness, and appearance!
I used to use the Mat color of all the MODELS of this one, and the chinstrap is a little shorter than that, but no problem in use!
View detail
DoubleVisor convenience
The White and Black Contrast is cool. The cap is soft, but it should be enough if you don't drive fast, and the DoubleVisor is excellent and really useful when driving with the Shield up and backlit. It is a product that is worth the cost. View detail
Cheap, lightweight, good cosmetics
Here are my impressions after having done it a few times since I bought it. We live in a rural area where it is 50 km over a mountain pass to the next town. We are a family and cannot afford to spend a lot of money on motorcycles, so we are looking for a product that is cost effective.
good point
The helmet I originally used was the System helmet from 10 years ago, and I was surprised at how light it was. Although the difference is only around 500 grams, the lightness of the Level helmet makes me wonder if I am wearing a helmet at all.
I don't feel that my head is being carried away even when driving (at 100km/h on the highway). I don't know if it is because of the lightness of the helmet, but it is clearly less fatiguing than the previous Helmet.
I honestly thought the One Touch Buckle on the chin looked difficult to use until I tried it, but when I actually used it, I found it very easy to use, and as the One-touch indicates, it can be easily adjusted to open and close with one hand.
The enclosed anti-fogging Seat works wonderfully and makes fogging a thing of the past.
A bad point
The sound of Wind Cutting while driving (60km/h on public road) is incredibly loud. It sounds like "BYOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOO. On the other hand, I think it means that wind is passing through the helmet that much.
The interior pad is obviously cheap. The pad on the chinstrap is especially cheap. The other parts don't bother me once I put it on, but the pad on the chinstrap is thin and the buckle on the chinstrap sometimes hits my face if I tighten it too much.
General review
We have never used a famous manufacturer's high-end helmet like ARAI or SHOEIetc., so we cannot compare them, but we felt that this is probably the best cosmetic product in this price range.
ARAI and SHOEIetc. were only tried on in stores, but I did not feel any particular difference just from the feeling of trying them on, but rather felt this one was better due to the lightness of this product. However, I cannot deny the feeling of cheapness when I hold it in my hand.
There is a higher grade model in full carbon with a higher price, but there is a 100g difference in body weight, and I tried on both full carbon and this product in a store, and it is true that full carbon felt lighter to wear, but dry carbon (this product) is more cost effective. I felt that Dry carbon (this product) is more cost effective.
If you can choose a high-cost, high-performance product because it is a safety equipment, it would be better, but for people like us who have to enjoy the hobby on a small budget, we think this is a very nice product.
View detail
Sunglasses are also included.
The cost performance is very good, and the quality is as good as that of Large Hand Manufacturer. View detail
It's just so light!
It's lightweight and I like the design, and it fits in my helmet in no problem. View detail
Mirror is white in the face
This was my first time using Rainbow mirrorShield.
Faces are not so transparent in LightType.
[Color] Unlike Smoke, Rainbow mirror changes its hue externally depending on the direction of light. It is the same when viewed from the inside. The sky, which had previously been tinted orange, tends to turn green when the direction of the light changes. At first, I felt a sense of discomfort. After using it for a while and getting used to it, it was Large sturdy.
It is LightType, but with Inner Shield, it can be used normally even in glarey places.
This Shield is a one-piece type and can be used without any problem when raising the Shield.
Replacement was easy with the Instruction Manual included.
View detail
My first Carbon
I wanted CarbonHelmet and bought it.
It's light; this weight with Inner Shield is great.
I have used XL in the domestic helmets I have used so far. This helmet is a type that can be worn without expanding the exterior. It is an Image that supports the head and face entirely with the interior.
Air Intake is also not a problem.
I use it on my ZX12R and SEROW225 and I don't mind the Wind Cutting noise.
Inner Shield is useful. When raised at night, it is very easy to see the road surface. There is no pressure when it is lowered.
The Cover portion of the Chin strap is a bit cheap.
The Chin strap is a push type that inserts the notch, but when removing it, the red belt-like strap can be pulled down from the top to unlock it and move the notch.
I used to use a certain manufacturer's regular push type Chin strap helmet. When I moved my neck to a large size when checking the rear of the vehicle, the chin strap touched the collar of my Wear and the lock came off. Since then, I personally prefer the D-ring type, but I think this method prevents the strap from being pushed by some accident and coming off.
Overall, the Helmet is easy to use and lightweight.
Helmet is said to be replaced in 3 years. This quality at this price is very helpful.
View detail
Cool without too much darkening of the field of vision
Mirror shield is still cool. The inside is only faintly visible from the outside. [Color] Although it is inferior to Clear, the vision is not darker than other companies' Mirror shields, probably due to the Inner Visor. View detail
HelmetSize adjustment
There are many different Size Adjustment Sponge for Helmet, but I think this WINS product is a very good product at a very reasonable price.
The Instruction Manual says to remove the InnerPad and attach the adjustment pad to the InnerPad, but I attached it to the inside of the helmet body. 。 It was more securely attached that way.
Oh, and the back of the head and overhead Pad came in two pieces each, so very affordable.
View detail
Fits: その他 GT-air II, その他 Z-8, その他 NEOTEC II, その他 J-FORCE IV, その他 J-Cruise II, その他 VZ-RAM, その他 CT-Z, その他 SZ-G, その他 F-17, その他 AERO BLADE V, その他 KAMUl-III, その他 SHUMA, その他 RYUKI, その他 EXCEED, その他 AVAND II, その他 A-FORCE RS, その他 G-FORCE SS, その他 FF-COMFORT, その他 A-FORCE RS JET, その他 G-FORCE SS JET
dull
I've tried all kinds of anti-fogging Spray, applying it before riding, during the ride, etc., but in the end it still fogged up.
I bought this product this time and I am very surprised that it doesn't fog up.
I've had this fog Win for so long that I don't think I would have ever needed to buy an anti-fog sprayetc.
When installing, clean and dry the Shield and carefully install it so that no Dust or Garbage can get in between. Surprisingly, it was easy to install.
I've used it every day for a while, morning to night, without the anti-fogging Spray.
Areas with fog WIN do not fog up at all.
I'm going to keep using it and see how durable it is.
View detail
Pin lock.
I use AGV K5 S.
Shield was just getting WoundWound.
Due to unavoidable circumstances (laughs)
I scratched the shield on Asphalt surface and replaced the shield.
I didn't get the pin lock because I didn't know when it would be delivered, so I installed the one I've been using for a while, but hmmm, the pin is in the wrong position and I can't reach it (lol)
So I decided to go for the fog-in, which was recommended by Seiho.
There's an adhesive side to stick it to.
With pin lock, it gets more and more subtle (laughs).
I feel like this is better. Mm-hmm. (laughs)
I just put it on and will try it again and report back on how it works.
View detail
It was cooler than the picture.
I thought it would be Lame.
It is a large thing that it is not overlooked in the mountain and the night, etc. though austere color was good, and it is bright color.
White is Blue, if you want to buy a new one, because it has been White for a long time.
Blue on Yamaha Blue.......
Ventilation is good, but it would be nice if the shield could be opened a little bit, so I deducted one point.
I think the shape of the head and the Size feeling is the same as a domestic Helmet in general.
(From OGK KAMUI2.... I wonder how many years I've been wearing it...)
Visor for city driving is not convenience equipment, it's safety equipment.
I think the reduction of fatigue is the most important safety.
View detail
It's just right.
[How is it used?
Installation of Y's Gear's OffHelmet.
Was the one you received as per Image?
Speaker is more compact than I expected
How was your experience with it?
The sound quality is good and easy to listen to.
[Points to note]
Fix Wiring with disconnection prevention.
How did it compare to other products?
The previous speaker was a gift, so I don't know the manufacturer.
Other items that would be helpful
Installation points and hang/Items to buy together/ Opinions and requests to the Manufacturer
View detail
Expect to hear Speaker.
I replaced it hoping that the sound would be better than the OEMSpeaker of SENA30K.
The bass was a little more pronounced, which I was pleased with.
View detail
It can also be used with A-FORCE RS
The product title reads FF-COMFORT but you can also use it for A-FORCE RS
Apparently, WINS is keeping the price down by using Common Parts
It's very easy to obtain and very helpful
View detail