Reviews
Replacement of LED Headlight
I purchased this product because some of the Lowe Beam of my previous LED Headlight stopped working.
I am very satisfied with my purchase.
The previous product had a bright illuminated part, but the area of illumination was narrow, and only a little forward of the road could be seen. This made the low beam beam very narrow and made me feel very uneasy. I always used High beam at night when there were no vehicles around me on roads without road lighting.
However, the low beam of this product is not only bright, but also illuminates the entire forward area like Halogen, so I was able to ride with a wide field of vision and peace of mind. Therefore, I personally felt that with RIZING2, I could ride on the road at night with only the low beam, even if there is no road lighting.
Nighttime driving has been dramatically improved thanks to RIZING II, and the most attractive point for me personally is that the LEDTip is positioned to have the same conditions as the Halogen light source. My Motorcycle was originally equipped with Halogen bulbs, so the reflector inside the headlight was also designed to efficiently illuminate the ground when Halogen emits light. Not only is the product itself designed to provide a wide field of view like Halogen, but the original function of the reflector has also been reproduced, and I believe that both light intensity and field of view have been improved.
View detail
Fits: HONDA Dunk, HONDA Sh mode, HONDA Giorno, HONDA BENLY50, HONDA CROSS CUB, HONDA BENLY50110, HONDA DIO110, HONDA glom, HONDA FORZASi, YAMAHA VOX, YAMAHA VOXDELUXE, YAMAHA VOXLIMITED, YAMAHA GEAR, YAMAHA NEWS GEAR, YAMAHA VINO, YAMAHA VINODX, YAMAHA VINOMolar feh, YAMAHA SDR, YAMAHA MAJESTY, YAMAHA MAJESTYC
Necessary and sufficient
Used on KLX125
High WattageHalogen bulb burns out after about 9,000 km, so we replaced it with PonLED.
Currently, the cost is higher than that of Halogen bulbs, as they can be used for more than 10,000 km.
Since the shape of the mold mouth is the same, the waterproof cover can be simply inserted, and it is as waterproof as OEM. Since it is a safety component, it is very important to ensure reliability when driving in the rain.
Although the overall length is about 1 cm longer, no interference or melting of the headlight cover has been observed.
Webike's Product Spec. The M&H Mazstripe Home page and Package only list the luminous flux as 6000k (Kelvin). Product Spec. I am not sure of the source of the information on the
Since it is more important whether the light intensity is high or low than whether the light color is White or Yellow, I would like to see Lm (Lumen) rather than K (Kelvin) indicated as the official manufacturer's information.
Physically, they feel that they are much brighter than regular Halogen bulbs.
The low beam illuminates too close when the high beam's optical axis is set slightly below the horizontal plane. It is difficult to decide where to set the illumination range. Also, the light distribution is H-shaped due to the heat sink at the tip of the valve. Another minus point is that the light axis easily jumps to oncoming cars.
Recommended for those who require ease of installation and reliability due to simple construction.
View detail
Just replace the Halogen bulbs, no need to do anything else.
The headlamps on the Motorcycle I purchased used were dark, so I purchased these lamps because I needed improved nighttime visibility in terms of age, and also in the hopes that they would improve safety during the day.
Installation is literally Just swap it out." OthersHigh performance (?) I am glad that there is no Unit storage or Wiring as there is in LED Bulb.
Some say the original was too dark, but well, it is bright.
LEDs are said to have a strong linearity and are difficult to diffuse due to their characteristics, but this is not a problem at all in use.
We have not yet driven at night, so we have not been able to experience any real difference.
Now we just need to see how durable it is.
View detail
JAPANLED Headlight Bulb
I bought a Dio110 and installed a leftover LED headlight bulb, but the light was diffused and somehow not good enough. I was very careful not to scratch and break the plastic claws.
The deciding factors for purchase are Japan, long life, 2-year warranty, and so on. Cheap Other Brand Products are also getting better in performance, but there is a difference between the best and the worst.
View detail
fat eyes
I bought this LED because the same one was out of order.
Quantity:2pc. One of the Set is the out-of-quantity:1 Set of 2pcs. so I had no choice but to use Quantity:1 Set of 2pcs.
Lynn Parts LEDs last 2 yearsQuantity:2pc. One of the Sets is still Large sturdy, but we have now added a Quantity:2pc. Quantity of Set:Since I purchased the Set, I put on the newly purchased LED Light.
This product is sturdy and durable, both high and low Large without flicker.
View detail
Sphere LightGod of thunderG3
I had been using God of thunder 3 lights, but I had a hard time seeing at night when driving through mountain passes. I can drive on mountain passes without any worries. View detail
Fits: SUZUKI GEMMA 125, SUZUKI TS200R, SUZUKI TS125, SUZUKI DF200E, SUZUKI GS125E, SUZUKI STREET MAGIC 110, SUZUKI TS50 HUSTLER, SUZUKI STREET MAGICS, SUZUKI STREET MAGIC, KAWASAKI Z250FT, KAWASAKI KL250R, KAWASAKI KLR250, KAWASAKI KMX200, KAWASAKI Z200, HONDA XRBAJA, KAWASAKI KMX125, HONDA REBEL, HONDA XL250R, HONDA XLR250R, HONDA FTR250
Careful with Size, but if it fits, it's easy!
Used for TW200E
The previous Owner has been playing around with things, so the Headlight is unknown what the OEM one is, but it fits the Limit and was very easy to install.
The head seems to be 20mm longer than the OEM Product, so size confirmation is essential.
View detail
Fits: SUZUKI LETS5G, SUZUKI LETS5, SUZUKI LETS4Basket, SUZUKI LETSBasket, SUZUKI ADDRESS V50 G, SUZUKI ADDRESS V50, HONDA PCX150, HONDA PCX, HONDA LEAD110EX, HONDA LEAD110
Replaced with Pine Stripe LED Headlight for mopeds
The NORMAL Halogen was too dark and I was afraid to drive at night, so I replaced it with Mats Stripe's LED Headlight this time.
Installation was very easy and took about 15 minutes.
I ride a white motorcycle, so I am satisfied with the white light and the body color.
I am glad I replaced them because they are more visible on the road at night.
View detail
High beamH9 for vehicle inspection.
The casting parts around the Valve were so crude that it was hard to believe that it was made in Japan.
The car passed inspection with High beam use.
The candela was nearly double the standard value and bright enough.
There were several of them available in different years and they differed in shape and warranty period.
View detail
LEDColor:Yellow
I replaced my OEM headlight with a Multi-reflector headlight and am using a 6500K LED Bulb, but now that a Yellow Bulb is available, I wanted to see the difference.
Color:Yellow didn't feel as dark as I thought it would.
Note that Motorcycle after 2006 is a violation.
I think it would look great on an old car.
View detail
Fits: HONDA DJ-1, HONDA DJ-1R, HONDA DJ-1L, HONDA DJ-1RR, HONDA NSR50, HONDA NSR50, HONDA XR50 MOTARD, HONDA Express, HONDA CAREN S, HONDA GYROUP, HONDA GYROX, HONDA GYRO CANOPY, HONDA JUST, HONDA JULIO, HONDA JOY, HONDA GIORCUB, HONDA Giorno, HONDA GIORNO DX, HONDA SQUASH, HONDA SPACY50
Anyway, it's bright.
Used for GYRO CANOPY (TA03).
CANOPY is bright anyway, partly because it is a two-light system.
Light distribution is not bad.
Now we are hoping for durability.
View detail
Fits: その他 , SUZUKI ADDRESSV125S, HONDA SMART DIO , HONDA LEAD 50
Try at night at Miyagase Dam
It provides full visibility even on city streets with almost no streets, dimly lit tunnel, and oncoming cars with excessive glare.
Model AF63 SMART DIOZ4
View detail
Anyway
It is bright and has a strong presence.
I was worried about Sphere Light II. III.
The cutline was also firmly attached to the Japanese Vehicle Inspection Correspondence, so I have attached this one.
View detail
Fits: SUZUKI GSX-R1100 (GU74A), SUZUKI GSX-R1100 (GV73A), HONDA CBR250RR (MC22), HONDA CBR250R (1-light vehicle MC41), HONDA CBR125R (JC50), HONDA CB750 (RC42), HONDA CB650F (RC83), HONDA CB400SS (NC41), HONDA CB400X (NC47), HONDA CB400SF (NC42), HONDA CB400F (NC36), HONDA CB400F (NC47), HONDA CB400SF (NC39), HONDA CB250F (MC43), HONDA CB1300SF (SC54), HONDA CB1300SF (SC40), HONDA CB1000SF (SC30), HONDA 400X (NC47), HONDA CB1000R (SC60), SUZUKI GSX-S1000 (GT79B)
Finally, it was not available.
I took the time to disassemble the Light area to remove the exterior, but Material:The Rubber Waterproof Cover could not be attached and I gave up on installing it.
It was a waste of time, effort and Gold.
View detail
The car passed inspection.
It is pricey, but it passed inspection.
It is bright and BATTERY friendly.
Then there's the question of longevity.
View detail
If you want to replace Valve, this is the one!
RC390 (2021 model year) The OEM Halogen Headlight was too dark, so we replaced it with this LED Headlight Bulb.
The quality and texture of the product is perfect.
The process is similar to a typical Valve replacement, such as removing the OEM Valve from the Coupler, removing the ValveBody and assembling it in the reverse order as when the new Valve for the LED was removed, and putting together the Wiring.
However, there is a gray cap on the reverse side of the headlight of the 2021 RC390, which may slightly interfere with the aluminum heat sink. Therefore, we installed the headlight by rotating the LED bulb first and then pushing the cap in, while sticking the cap halfway in.
When I purchased this product, I was not sure if I could afford this price for two Valves since the 2021 RC390 has two lights.... But when I installed it, I was very impressed with the brightness.
Both Hi and Lo can be installed with the same work and no modification, and the brightness of the product is highly satisfactory with no complaints.
View detail
The cutline of the low beam is clearly visible.
This is a change from PROTEC LED Bulb. The construction is solid, and I am satisfied with no wobble when installing the for H4R pedestal (sold separately). The brightness is also sufficient. It would be great if it could pass the vehicle inspection after installation. View detail
From Chinese HID to Sphere LightRIZING2
Used for low beam of TDM900.
Additional Spacer 1980 yen is required for installation. (I could have made it myself)
Since the rubber packing in Included Parts:does not fit, the coupler will not fit unless the original rubber cover is cut.
When we got the vehicle, it already had 35W Chinese HIDs, so this is not a comparison with NORMALHalogen.
Even though it is a Chinese HID, it is 35W, so it was quite bright, so even after replacing it with RIZING2 LEDs, it seems a little dark.
The color temperature is higher than that of HIDs, or perhaps the color is comparatively blue.
I would have preferred 4500K.
However, I am glad to know that the symptoms such as the engine igniting when the high beam is turned on while the low beam of HID is turned on, as if the voltage had not caught up with the low beam, the light disappears for a moment, and the engine ignites, are gone.
View detail
It is quite dark for a Headlight Bulb.
[How is it used?
Purchased to save power over NORMALHalogen bulb.
Was the one you received as per Image?
The Package was poorly packaged with simple packaging, but the product itself is fine.
Heat sink is solid and not as badly made as I expected.
Was the installation difficult?
Installation is easy, as the valve is simply replaced.
How was your experience with it?
The LEDs are only on one side, so they seem darker than the latest LED bulbs. It is not likely to pass the vehicle inspection, and it is not suitable for a large motorbike.
[Included Parts:were they on?
Nothing is attached.
[Was there anything that disappointed you?
The drawback is that it is dark for low power consumption.
Recommendation for more high Watt bright LED Bulb.
▼The H4Type is sold out, and I feel that this functionality has reached its limits; it is a Headlight Bulb, so it is useless without functionality, so I can't shake the feeling that it has been eliminated as a result of the evolution of more high Watt LED Bulbhe.
View detail
LED from Halogen
I switched from Halogen to LED!
I think it is a little BlueWhite.
I am very satisfied with the dress-up effect and the ease of viewing.
View detail