Reviews
Fits: HONDA MONKEY125, HONDA MONKEY, HONDA SUPER CUB, HONDA glom, HONDA CUB, HONDA NSR80, HONDA NSR50, HONDA NS-1
Required for GROM Centrifugal Filter and Clutch maintenance.
This is a special tool without which it is impossible to disassemble the Clutch.
Parenthesis, or SST at best.
Even Single Body has a hole in the side, so you can use it if you stick a round stick or something.
If you use Ratchet, the insertion angle is 1/2-inches (12.7mm), and you can't use it without Extension bar because of the depth.
I know Impact says it's not available, but 1/2, then I wanted it to be 9.5mm.
View detail
Hexagon Nut。
It's not easy to find, so it's great to have Rose for sale. View detail
InchNut。
It rusts easily, so it's not for people who are worried about rust. View detail
Nut for Motorcycle is for Motorcycle.
I bought this one because the tools used in Home center Nut are different. The back is GizaGiza so it locks in place. View detail
prevention of slackening
It is purchased to prevent the License Plate Fixing Screw from falling off and loosening.
Unlike normal nut, it is Lock nut with Flange, so it is good for a little bit of safety.
View detail
Dress-up
Purchased for dress-up and weight saving purposes, a bit expensive. View detail
Fits: HONDA glom, HONDA glom, KAWASAKI Z125 PRO, HONDA MONKEY125, HONDA ZOOMERX, HONDA ZOOMERX, HONDA ZOOMERX, HONDA CB400 F (JF52-1000001-), HONDA DAX125, HONDA MONKEY125, HONDA 400 X , HONDA CB400 R, HONDA CB250 F , HONDA CBR250 R, HONDA CBR125 R, HONDA MSX125 SF, HONDA MSX125, HONDA CT125, HONDA CL250
The look is perfect!
I replaced the OEM Nut (Washer underneath) because it was rusty.
If you change it, you may be impressed with how shoddy the OEM Gold plating was. You might be impressed.
However, Honda's poor design led to an OEM 30?
In addition, this Nut is more than 32?
I bought the tool because I had no choice but to do so, but it might be a waste of money because it is also a Size that I do not use so much else.
If you want to leave it to a shop, it's possible, but if you want to replace it yourself, it might be delicate because it includes the expense of tools.
View detail
To create a sense of unity.
Used for fixing Bolt of Silencer band
The front is Black and the back is Silver.
It is moderately good.
View detail
Fits: HONDA glom, HONDA glom, HONDA ZOOMERX, HONDA ZOOMERX, HONDA CB400 F (JF52-1000001-), KAWASAKI Z125 PRO, HONDA MONKEY125, HONDA ZOOMERX, HONDA DAX125, HONDA CBR125 R, HONDA MSX125 SF, HONDA MSX125, HONDA MONKEY125, HONDA 400 X , HONDA CB400 R, HONDA CB250 F , HONDA CBR250 R, HONDA CT125, HONDA CL250
Replacement from STD
I have not installed it yet, but I don't know the wrench size because there is no size description. I have not installed it yet, but I do not know the wrench size because there is no size description. I will add it after I install it later. View detail
Very high quality Aluminum Nut
This is a very high quality Aluminum Nut.
I bought it as a Nut for fixing Sprocket because it is Recoil processed.
The overall quality is good, but the price seems high.
If it was a little cheaper, I wouldn't have complained.
View detail
Good product
I used it as Nut for Exhaust Band.
Gold color is One point and I like it.
The durability is unknown as I just put it on, but the platings did not come off with the tools I used during installation.
View detail
Quantity:It was 1pc.
Quantity in images:1 Set of 2pcs.:1pc
It says one in the description, but I missed it.
I bought the Spring washer because I was concerned about the thickness of the Nut when I stacked the Spring washer on top of each other as much as I needed, so I bought it.
The experiment is underway to see if the tension from the Washer can free Mirror from bending on its own.
View detail
Quality is the same as OEM.
I've been using well nut for Cowl and Screen, and I replaced it when I got old and Rubber started to get crispy. View detail
Fits: MV AGUSTA TURISMO VELOCE 800, MV AGUSTA STRADALE 800, MV AGUSTA RIVALE800, MV AGUSTA F4-750, MV AGUSTA F4 RC, MV AGUSTA F4 1000S, MV AGUSTA F4 1000R, MV AGUSTA F4 1000R, MV AGUSTA F4 1000R, MV AGUSTA F3 800, MV AGUSTA DRAGSTER 800, MV AGUSTA DRAGSTER 800RR, MV AGUSTA BRUTALE990R, MV AGUSTA BRUTALE800, MV AGUSTA BRUTALE920E, MV AGUSTA BRUTALE800, MV AGUSTA BRUTALE675, MV AGUSTA BRUTALE1090RR, MV AGUSTA BRUTALE1090RR, MV AGUSTA BRUTALE1090R
It's a component that's important to look at.
It seems that the female screw of the pure STD Nut and the male screw of the Shaft were chewing on the replacement of the Tire, and it was not easy to remove it.
After removing it, the threads were ruined, so I replaced them with CNCNut.
View detail
Step end・Nut
I replaced it with Rear Sets
the resin at the end of the footpeg came off and was lost
I was looking for something to help with that
I found a clasp similar to Bar End
Nut is embedded in a tubular rubber
By tightening the bolts, the rubber expands and
It is a structure in which the rubber is fixed in a cylinder
This structure is the same as the Bar End, so
even as an end process for footpegs
You could use it, couldn't you? thought
I bought it
Part that fits exactly into the footpeg hole diameter φ18.5
φ18.2?SizeM8Nut was there, so
DAYTONA:Buy it with the Cap bolt color
Material:Cap bolt in Aluminum
Making the step end look gorgeous and
By making the footpeg a little longer
It gives you a wider footing and a more comfortable position
A note on customization is
I need to put a screwdriver on the bolt to hold it in place
GEAR and Brake operations loosen the bolt, and the bolt comes loose
There's a good chance it will be gone before you know it
You should check how it's fixed after installation
Is good
View detail
Fits: SUZUKI GSX-R600, SUZUKI GSX-R750, SUZUKI GSX-S1000, YAMAHA FAZER8, YAMAHA FAZER8, YAMAHA FZ1FAZER, KAWASAKI ZX-6R, KAWASAKI ZX-6R, KAWASAKI ZX-6R, KAWASAKI ZX-10R, SUZUKI GSX-R600, SUZUKI GSX-R750, SUZUKI GSX-R600, SUZUKI GSX-R750, SUZUKI GSX-R600, SUZUKI GSX-R750, SUZUKI GSX-R1000, SUZUKI GSX-R1000, SUZUKI GSX-R1000, SUZUKI GSX-R1000
I think it's a solid quality
I installed it on my GSX-S1000
I didn't have a 36φ Socket for installation, so I procured a new one
To avoid scratching the Top Bridge, you need to make sure that the part of the Socket that touches the Top Bridge is not damaged Only cured and installed
Things are Material:Although it is aluminum, there are no scratches on it even if it is tightened firmly So I don't think the quality is a problem
This is a product that can be recommended for dress-up around the Handlebar
View detail
Good for the anti-looseness area
Material:I used it to hold the Aluminum Fender EliminatorParts in place I used this because I'm afraid that the Nut will come loose at the fixed point of the heavy Parts Even if you don't use lock, it's locked up tight and secure View detail
To prevent rust on Stud bolt
The 6mm Stud bolt on the Mini bike breaks easily when it gets rusty
I used it so that such a thing would not happen again
I used 4 cylinders because it's a 2 cylinder, and if you have a MONKEY or SUPER CUB, you can use QUANTITY:2pc is enough
It may not be a good idea to manage Torque, but you can use a thin layer of Grease on the Stud bolt The assembly will not produce any Bolt rust
Also, the long nut makes it easier to maintain in tight spaces
However, the outside of the Nut itself is treated with plating by Steel, so if you leave it unattended, the outside of the Nut will get rusty It is
It's cheap, so I don't blame you
View detail
It's an inconspicuous part
I used it to hide the threads of UniversalMeter It's a good fit with the appearance of the UniversalMeter
I like the fact that it's black and it's discreet
The only one whose cost is more expensive than Universal is Minus
View detail
BlackLock nut, which is not often seen
The silver color of the Nut stands out when the Custom is unified with the black color Black Nut is also seen in Universal Product, but it's not as black as the Lock nut If it is, you will hardly see it I think this is a party where you can get a little bit of attention View detail