Reviews
Use with Easy Lift Up Stand
When using Lift upSTAND, it becomes a 3-point support and causes a rollover risk.
This product prevents the front wheel from moving and stabilizes the support.
View detail
It's handy.
I used to wear the Rubber Band.
I was accumulating some points, so I replaced them.
I use it quite often.
I wish I had one in my toolbox.
View detail
This is an essential item when using the Maintenance Stand.
When hanging the Maintenance Stand, the Left end of the Handlebar is cut off for safety and
The front brake must be locked.
Until now, I used to fix the Brake lever with Vinyl Tape and so on.
I believe that the frequency of use of the GPZ900R maintenance stand will increase in the future.
I purchased this product and used it.
With a texture that won't seem to break no matter how many times you use it and a bright Orange color.
It stands out in the toolbox!
View detail
I'm satisfied
I am very satisfied with it. I don't usually do anything myself, but I managed to install it. I had a hard time, but it is worth it. View detail
Fits: HONDA PCX125 JF28, HONDA PCX125 JF52, HONDA PCX125 JF56, HONDA PCX125 JF81, HONDA PCX125 JF84, HONDA PCX150 KF12, HONDA PCX150 KF18, HONDA PCX HYBRID 2AJ-JF84
Unfortunately, it's not attachable.
My PCX was not able to install Knuckle Visor because it is attached to my PCX. Because it is a simple part, installation is easy and the feeling of operation is also simple. I think it's not bad. View detail
useful to have
It is used for MT09 and XG250 TRICKER. XG250 TRICKER is Short I just replaced it with a lever But I was able to use the MT09 with no problems, and I've been using the Tire tube until now which is almost free and has a lot of applications I think it depends on the mindset of the person using it View detail
It is useful for simple maintenance
Until now, Wheel Cleaning and ChainMaintenance has been done by Move and Car Jack was troublesome
Purchased for use with the DAYTONA Maintenance Roller Stand
Other Manufacturer Material:I thought about Plastic? but it was too narrow and there was no play, so I went with this one
It is easy to make but useful for locking the rear wheel during maintenance
How durable is the connection between the Rubber and the Rubber?
I think it's a little expensive for the way it's made
View detail
It's useful enough
The front brake locks easily to make maintenance easier
It's easy to install and durable and will last a long time
View detail
It's not too bad, I guess
I was hoping to lock the Brake at a traffic light on an uphill climb or downhill By the way, the LEAD 100 I used to ride was Standard Equipment Being able to Brake Lock when loaded into the car also makes the Motorcycle more stable View detail
I hope you'll find it in your toolbox
I bought it when I started riding my current Motorcycle
Why I wanted this
1.It will be easier to trigger after a fall
2.Do you need it because the house is on a hill in front of you?
I bought it with the vague idea that it was a good idea
Fortunately, there has been no fall down until now, and now I carry the one that I cut short the Rubber Cord of Pants, and I no longer take it with me on the road
It's convenient to keep it in the toolbox for Large
Specifically, when washing or chain-lifting up the rear wheels, always use the Front Lock and then go
In order to reduce the load of the Master Cylinder, the far side of the Brake lever is used before using it If you change the adjustment mechanism closer, it's good to use it!
When you're done using it, just return the Brake lever to the original setting!
If you're going to keep it in your toolbox, we recommend you use the flashiest colors possible 。
View detail
Fits: HONDA PCX125 JF28, HONDA PCX125 JF52, HONDA PCX125 JF56, HONDA PCX125 JF81, HONDA PCX125 JF84, HONDA PCX150 KF12, HONDA PCX150 KF18, HONDA PCX HYBRID 2AJ-JF84
I installed it on my PCX HYBRID
It is easy to install The rear wheel Brake adjustment was large and sturdy without having to do it
It is a convenient substitute for the parking brake, but one-handed operation takes some getting used to
When installing this product, the OEM bolts and pure STD nuts are used I'm worried about Nut tightening
If you're unsure, they explain that they use an anti-loosening agent, etc., but for this price, a special Bolt is available I think it could be included
View detail
Mostly successful
Required when using the Maintenance Stand
You can use STAND without it, but if you can avoid Risk for 600 yen, it's cheap insurance is
You can use it for BrakeMaintenance, so it's a good one to have
View detail
I can't recommend this one highly enough
Within three days of installing it, Rubber tore it up! A Lead has been used on a Large Motorcycle for 6 months and is still Large durable! The cheap ones are no good! This one might be Large durable for short time use! View detail
It is an essential item.
I installed it on my Swish LIMITED Officially it is not possible to install it, but it can be installed without any problem Of course it can be operated with no problem View detail
Fits: HONDA PCX125 JF28, HONDA PCX125 JF52, HONDA PCX125 JF56, HONDA PCX125 JF81, HONDA PCX125 JF84, HONDA PCX150 KF12, HONDA PCX150 KF18, HONDA PCX HYBRID 2AJ-JF84
Convenient to have
I remembered that it was attached to DIO and other OEMs, so I put it on
I think it's almost as convenient as you'd expect during a railroad crossing or a stop on a hill at a traffic light
However, I would like to see a long bolt included in the package if possible
And I wish I could lock it with my Left hand index finger, but Lever is too far away to reach it
It's a shame that I end up having to lock it with my Right hand while holding the Brake
View detail
Useful Tool!
For example, during ChainMaintenance
Easy to use when you want to lock the front brake
Useful Tool
There were cheaper ones, but the shape is narrower
I was worried about the Damage on the Grip, so I went with this one
I've used it and it feels like it's hooked up to Grip
I'm glad I chose this one
You can use it without worrying about the grip thickness
View detail
Fits: SUZUKI Address125 (2BJ-DT11A), SUZUKI Address125 (2BJ-DT11A)
For parking lock on the rear brake
You will need to remove the cowl around the Light as it is installed on the Scooter As there is no detailed information about this in the product manual, please refer to the service manual for further investigation is required
In my DT11A, the black cover part under Lever interfered with this product So I had to remove about 5mm
That took about two hours
I am satisfied with the function
View detail
Fits: HONDA PCX125 JF28, HONDA PCX125 JF52, HONDA PCX125 JF56, HONDA PCX125 JF81, HONDA PCX125 JF84, HONDA PCX150 KF12, HONDA PCX150 KF18, HONDA PCX HYBRID 2AJ-JF84
Very easy to use
It is very useful for stopping and parking on hills
And look "P" I like the fact that it's a letter of the alphabet
When we changed the lever to the adjust lever, there was not enough space for the lever to pass through
Bend it once to bolt the upper side and then bend it again to bolt the lower side
It was necessary
It's a little distorted, but it works fine
View detail
During maintenance!
I use it for maintenance.
Tie Wrapetc. I substituted it, but it is now easier as the exclusive items can be attached or removed.
It is necessary for safety.
If it is used for a long time, there seems to be a burden on Master Cylinder and it may be broken.
View detail
You can use!
We are using it for safety for easy maintenance at a place that is not flat or at home in the Touring.
It's easy to use, it's convenient to have one as you do not take the place to carry around!
View detail