Reviews
Fits: KAWASAKI ZEPHYR1100
OHLINSfor Inverted Front ForkCaliper support
I changed to the SUNSTAR 320 Hole & Slit and there was no drag on the Brake. View detail
I trust you.
Good accuracy.
The texture is good.
The price is cheaper than Acosat.
It is from FOR JAPAN MODELManufacturer
I'm using it on another company's Clutch Kit.
No problem
View detail
Pad pin
It's easier to grab and has a better texture than the OEM bremboPin. View detail
Used in ZX-25R
Used in combination with RCS15mm on ZX-25R.
Black stay and [Color] The combination of SmokeTank gives it a luxurious look.
It's also good that the Hose has a Mesh cover, because it's not sold very often for Single Body.
All the bolts are included so I didn't need to buy anything else to install it.
View detail
Fits: Others RCSMaster Cylinder(Brake/Clutch), Others Radial master cylinder(Brake/Clutch)
Handle with care.
This Hose is covered with Mesh and I like its high quality appearance, and I always use it when I install Master Cylinder of Tank Separated Type.
When I installed it this time, the Hose insert was too tight and the Mesh covering was spread out, causing it to come off and become tattered.
You should not work on it by force because it is only covered with Rubber hose.
View detail
Just right for an adjustment.
Bought this because I needed it for a Caliper replacement.
It's not a strength problem, so you can use it.
It's hard to get a better impression than that with a product like this.
View detail
Fits: Others RCSMaster Cylinder(Brake/Clutch), Others Radial master cylinder(Brake/Clutch)
It looks good.
Depending on the position of the Tank, I think you can use both two (Brake and Clutch) in 10 cm.
It is not recommended for those who are in a position where the bend of the hose is too tight.
I have a brembo RCS, H2 mouth cut tank and POSH brackets and it feels pretty tight.
If you want to install the tank horizontally and neatly, the normal Hose will be more ideal for you.
View detail
Fits: Others RCSMaster Cylinder(Brake/Clutch), Others Radial master cylinder(Brake/Clutch)
Mesh hose of Koken Original
This one looks better and seems to be more durable than the brembo OEM Hose. View detail
Fits: Others RCSBrake master cylinder, Others Radial brake master cylinder
If you want everything from the MASTER to the Caliper to be brembo, you should buy one.
I bought this product because I installed brembo's Master Cylinder.
It's not so much the performance, but the fact that I wanted to make sure everything from the MASTER to the Caliper was brembo related.
It is not difficult to install, so anyone who can bleed the fluid can do it.
However, if you have an ABS vehicle, there is a pattern where the air is trapped and the squeal will make a large noise, so if you are not confident in your maintenance skills, you may want to ask a shop to install it.
View detail
Bracket Set without Tank
As for brembo, I often buy Koken's stuff, but this time Quantity:Set is very much appreciated.
Even if you only want the Bracket, you can get the Tank included in the Quantity:I had no choice but to Set.
I had to buy that. Finally I can get rid of that bother. The quality is also very good.
View detail
Fits: Others RCSMaster Cylinder(Brake/Clutch), Others Radial master cylinder(Brake/Clutch)
Koken OriginalOil Tank Hose
It has a higher quality feel than the brembo OEM Hose. It also seems to be more durable. View detail
Fits: Others RCSMaster Cylinder(Brake/Clutch), Others Radial master cylinder(Brake/Clutch)
Custom parts are all about looks!
A slightly sturdy, mesh-embedded hose
As others have written, the Hose is thicker and takes a little more care when bending it.
But since appearance is everything, I think this thickness is a large thing.
I'm sure it's thin and Mesh is possible, but that thickness seems to give it an Other Brand Product feel
Anyway, the Cool is more transparent than the regular Hose, and the Hose is more attractive than the regular Hose.
View detail
Higher quality than brembo OEM
The motivation for the introduction was iron Bleeder Bolt corrosion on the NORMALRear caliper.
My regular shop noticed corrosion during vehicle inspection maintenance and replaced the OEM product, but there was no corrosion on the Front and it was untouched.
I have been using 40mm pitch brembo universal casting for the Front (I'm the second generation and I've been using it for 7 years, and the first generation Brembo caliper lasted 36,000km for 17 years). The purpose is to extend the life of the caliper.
The ability to convert from the rarely used brembo OEM 7/16Inch (11.12mm) size to the frequently used 10mm size is another motivation.
The texture and structure are both good, etc., so we'd like to expand to the rear caliper as well.
View detail
These parts are perfect for improving the texture of the Handlebar area!
The brembo tank cap is Material:Because it's plastic.
I replaced it with Duralumin Cut-out's Anodized machined Koken Oil tank cap!
Black loves the KOHKEN K and the letters around the Cap.
View detail
Fits: Others
good
Compared to the bremboOEMLever, the R of the finger-hanging point is smaller, so it is easier to use and easier to control.
Aero Type and Design is good.
View detail
Wow that's cool
I bought this for Brembo. It's hard to tell the performance, but I like the beauty of the color and the shape. It's easier to pick up than the standard pad pin, so maintenance will be improved. But the price is a little high. ・・・・ If it is a little cheaper, it is the place where I want to introduce it to this and that. View detail
Fits: Others
It's pretty good.
I installed it on a ZX10r04
Simultaneously installed with the Edge linePROTripeace!
Clearance, etc., installed with no problem.
You can experience the difference with MODESelect's N.S.R.
It is quite easy to BrakeRelease and I feel that Lever shape is well made.
View detail
Fits: Others Radial clutch master cylinder, Others RCSClutch master cylinder
Quantity:The set is easy to use.
If you change the MASTER to brembo, you will need to change the TANK etc.
This item has Tank, Bracket, Hose and Bolt as its Quantity:The set is easy to use.
If you're not particular about it, you can buy it at the same time when you change MASTERs.
View detail
Fits: Others RCSMaster Cylinder(Brake/Clutch), Others Radial master cylinder(Brake/Clutch)
Mesh is good.
The normal rubber hose will cause water droplets to come out around the hose.
With Mesh hose, you don't have to worry about that.
I also always use mesh hose because it is safe from external shocks.
The length is 10 cm, so if you want to use it longer than that, you can't use it.
View detail
Fits: Others RCSMaster Cylinder(Brake/Clutch), Others Radial master cylinder(Brake/Clutch)
It looks good
Used for GALE SPEED's Tank and Radial master
It wasn't too hard or too soft, just right.
Mesh hose looks great.
View detail