Reviews
Convenient Quantity:Set
CT110 HUNTER CUBCT110, purchased for 12V conversion.
It is a very nice product because there is no need to examine them one by one.
View detail
For a certain Blinker's High flasher countermeasure.
I bought a 10W one because 8W makes it a high flasher.
It worked.
View detail
Fits: その他
I still prefer BlinkerLED.
Is it good that the current consumption has been reduced or is it slightly darker that the LEDs were replaced? View detail
Replaced with Valve here as I had PS250's previous Blinker coverClear
I bought this one because one of my beautification plans for my used PS250 was to stop using the Orange color for the Blinker cover and replace it with Clear, but then I had to replace Valve with Orange. Yes, it's a waste of time. It's a waste that I can't use what I have so far. I could have replaced it with LED Bulb anyway, but then I would have had to replace the Blinker parts (I forgot the name of them). Also, I don't dislike the fact that I can see a little bit of orange color through the transparent cover, and it gives the car a nice, modern look.
However, unlike a moped, the Valve had to be inserted horizontally, so it was somewhat difficult to do. The work was easy and it took only 10 minutes to replace 4 valves.
One thing I wondered is that the front Blinker is 23/8W since it also has a built-in Position lamp, and the back Blinker is 23w, but the front one is less expensive and the back one is more expensive. I would understand if it was the other way around, but why is that?
And previously, Clear cover and Valve were Quantities.:It looks like it was sold as a Set, but it seems to have been discontinued.:I would be more than happy if they were sold at a discount at Set.
View detail
BENLY50AA05
Used for Meter Bulb of Benly50AA05.
OEM is 1.7W, but it is now 5W and brighter.
View detail
For Meter Bulb
I purchased this for my 4LMONKEY Meter Bulb.
If you like the old-fashioned way, this is the way to go, as it is not as flashy and bright as LEDs.
View detail
Room lightValve for Vehicle
I may not have a chance to use it in the future since LEDs are cheap and have good color...
Not White, but a mixture of Blue and Yellow colors.
View detail
Fits: その他
Position side could not be lit.
The Blinker can light the Pilot lamp, but the Position lamp cannot light the Pilot lamp.:Pair (for Left and Right) Both are lit bonderly.
Plus contact of the mouth Gold, since we could see continuity between the two, did it not match the vehicle?
View detail
Good
I used them because my interior light had run out of bulbs, and the brightness has not changed at all and the quality is absolutely fine.
Since it comes in a pack of two, I can keep it as a spare and replace it when I run out of balls again.
View detail
Cospa is nice
[How is it used?
When I bought a Blinker to change from an OEM one to a POSH one, I was told that Valve was not included, so I looked for the same POSH one, but it was not sold, so I bought this one with a lower price.
The price is for a two-pack, so I think the cost performance is excellent.
How was your experience with it?
Installation was easy and problem free.
How did it compare to other products?
As for the color, is it more Orange than the OEM's? I feel like it. I personally like the color, so it is not a problem.
[Points to note]
Do not touch VALVE stickily as it will get greasy.
View detail
No problem and safe. Just be very careful about the angle and shape of the mouth Gold.
For the Tail lamp, we avoided LEDs so that the power generated would be used properly in combination with the power consumed.
I hear that it is not good to have too much surplus electricity because once electricity is generated, it can only be converted into heat, etc. at the Regulator.
The Headlight is always on and off and I thought it would not be affected by the LED, but the Tail is always on, so I left the White hot bulbs on.
Made by Pine Stripe, no question about it...White heat bulbs are becoming a component that I'm thankful they still manufacture.
We kept one as a spare just in case.
View detail
it is normal
Product Name
M&H Pine Stripe MAnd H Pine Stripe Double Base Bulb S25 BAY15D
Item Number
1P3407C
Vehicles
DREAM110
Number of man-hours
Around 5 minutes
Why did you choose this product?
I bought this as a for repair because my Tail lamp was out.
The reason why I chose it is that it is inexpensive, which is a Large reason.
I decided to use regular bulbs because it was not worth it to replace them so many times when I changed to LEDs.
Impressions after using it
You can definitely use it and it will light up if the Size compatibility with the vehicle is not wrong.
If it does not light up, it is likely that you bought the wrong product or the product Body is defective.
The product I bought worked fine for both the tail light and Brake light, so the vehicle was repaired without any problems.
▼ Attention
Size and Type vary from vehicle to vehicle, so you need to research before you buy.
View detail
Stable M&H.
I have no complaints about the quality and price. View detail
I'm doing my job reasonably well.
I bought this because my stop light bulb was out. Replacement was very easy and only required a Phillips head screwdriver. I have no complaints if it is durable. View detail
Thank you for the quick delivery.
I haven't installed it yet, but I'm happy that it's delivered safely. I'd like to leave anywhere if I could imagine a w800 that would fit well. If the delivery is a little late because the webike is out of stock, the delivery will not be too late! View detail
Reliability Large for a quick fix
I bought it to repair the Tail lamp of the commuter car which had been cut before I knew it. I thought about LED for a moment, but when I think about the reliability of the cost and delivery time, the large thing is that it arrives sooner than anything else and can be fixed quickly.
It's a bit pathetic that if you buy two balls, one is out of stock, but the product is reliable.
View detail
UniversalLamp
The Meter Bulb was out, so I bought this for Replacement.
It lasted 6 months, but I would buy it again.
View detail
"The Mechanic's Shop. A box like this is cool.
The kind that makes you want to collect all the balls. "The Mechanic's Shop. A box like this is cool.
I bought this for the Headlight fabrication & to see how it works.
The color of the floodlight is NORMAL, but it is Stanley of trust.
The video is a light introduction to my car.
View detail
Valuable 6V light bulbs
I am glad that you continue to produce the precious 6V bulbs.
Used for Restore of SportsCUB.
Durability and other factors are unknown as we are about to test it.
The slightly higher price is unavoidable given the production numbers.
By the way, it is not related to the product itself, but one point is noted.
Check the application carefully when buying old Car bulbs.
It's very easy to make mistakes.
View detail
I am satisfied with the brightness.
I don't know how durable it is yet, but I replaced it because the Valve of the Room lamp of NORMAL ran out of bulbs. It is clearly brighter than the NORMAL one. The price is reasonable and I am satisfied with the two pieces. View detail