Reviews
Fits: SUZUKI GSX-S1000, SUZUKI GSX-S150, SUZUKI GSX-R150, SUZUKI GSX-S1000F, SUZUKI GSX1300R HAYABUSA, SUZUKI V-Strom250, SUZUKI GIXXER SF250, SUZUKI GIXXER SF250, SUZUKI SV650X ABS, SUZUKI SV650 ABS, SUZUKI SV650X, SUZUKI GSX-8S, KAWASAKI ZX-10R, DUCATI 999, DUCATI 999S, SUZUKI GSX-R1000, SUZUKI KATANA, SUZUKI GSX-R1000R, SUZUKI SV650, SUZUKI GSX-S1000GT
Outstanding functionality and design.
Various manufacturers have released STANDBrackets with good appearance and parenthesis, but I think this one is outstanding. Of course, the functionality is also sufficient. View detail
Fits: KAWASAKI Z900RS, KAWASAKI Z900RS, KAWASAKI Z900RS
Used for Z650RS
It is for Z900RS, but it was attached to Z650RS normally. View detail
Pricey, but the stuff is good.
[How is it used?
Fits ZX-6R 2023
Used for chain adjustment and wheel removal/attachment.
Was the one you received as per Image?
It arrived in beautiful condition with no scratches.
Was the installation difficult?
It is easy to install with Bolt1 pc.
It is necessary to have a certain sense of the material, since the stipulated Torque is not explained in particular, but Material:Since it is a DURACON Slider, even if it becomes Overtorque, the resin part will be crushed, so you may not have to be so nervous.
How was your experience with it?
The common Anodized Treatment Stand Hooks are noticeably scratched and scraped when used, so even if it is not a problem in practical use, it is bothersome.:I chose DURACON, and even with DURACON, scratches will appear, but they will not be like peeling paint, so they are somewhat less noticeable.
The fact that it also doubles as a Swing Arm Slider was another point that led us to purchase it.
Material on all SS such as ZX-6R.:AluminumSwing Arm is vulnerable to strong impacts and is expensive, so we chose Stand Hook, which offers the best protection possible.
[Was there anything that disappointed you?
It's a little pricey, and I wish it were cheaper since it's UniversalParts, but the thing is well made.
[Good to have].
BoltMarker, Screw lock agent
It depends on how often you use the Stand Hook and how often you ride your motorcycle, but I think it would be safer to have a stand hook because it is also a place where loads are applied.
View detail
For those who have problems with Rear stand
Purchased for YZF-R6 Rear stand, can be installed with Bolt On.
It is super lightweight with a considerable amount of meat removal. The back of the Level is particularly artistic.
Compared to the conventional Spool type, the distance between the Swing Arm and the Rear Stand is greater, making it extremely effective in preventing scratches.
Bolt holes can be prevented from being damaged when tipping over. In addition, the force required for jack-up is reduced.
The quality is quite high and the Cost performance is the best. I can recommend this product.
View detail
899 Panigale is M6
I bought M8 by mistake for 899 Panigale use, but bought M6MODEL because of its good texture.
Simple and robust design was highly satisfactory.
View detail
Bolt size was wrong, but the quality was high.
I tried to use it on my Panigale, but gave up installing it because it was an M6 instead of an M8.
However, we switched to M6Spec. because of its higher quality compared to the price.
The product was designed with no problems in installation and the texture of Aluminum, and was recommended.
View detail
Fits: YAMAHA YZF-R6, YAMAHA YZF-R1, YAMAHA MT-10
Maintenance Stand was a durable VPlate receiver.
The maintenance stand I am currently using is a durable VPlate stand, so I decided to use Babyface's Swingarm Stand Hook V Type Black (I thought it would be better to be inconspicuous), which is a very good quality and cost-effective product! The Hook is very easy to hang and can be used by one person! I am also considering changing to a Torx type bolt with a tamper-proof mechanism to prevent theft of the single body parts. View detail
Fits: KAWASAKI Z400, KAWASAKI Z250, KAWASAKI Ninja ZX-25R, SUZUKI GSX250R, KAWASAKI Z650RS, KAWASAKI Ninja650, KAWASAKI Ninja400, KAWASAKI Ninja250, SUZUKI GSX250R, SUZUKI GSX-R125, SUZUKI GSX-S125, SUZUKI V-Strom250
YOSHIMURA, quality is good after all!
[Impression]
It just looks good.
It has a luxurious feel and is great with the body color.
The contact point with the Stand Hook rotates to prevent large scratches when standing on STAND.
[Lamentations.
It would have been better if it were a bit larger.
View detail
Fits: SUZUKI GSX-S150, SUZUKI GSX-R150, SUZUKI GSX-S1000, SUZUKI SV650 ABS, SUZUKI GSX-8S, DUCATI 999, DUCATI 999S, KAWASAKI ZX-10R, SUZUKI GIXXER SF250, SUZUKI GIXXER SF250, SUZUKI V-Strom1000 XT ABS, SUZUKI V-Strom1000 ABS, SUZUKI GSX-S1000GT, SUZUKI GSX-S1000F, SUZUKI KATANA, SUZUKI GSX-R1000, SUZUKI GSX-R1000R, SUZUKI GSX1300R HAYABUSA, SUZUKI SV650X, SUZUKI GSR750
YOSHIMURARear stand bracket
YOSHIMURA looks good on GSX1300R HAYABUSA, and the red color matches the body color. The price is moderate, but it is a good product. View detail
If you've just seen it, I recommend...
[How is it used?
Purchased to use Maintenance Stand.
Was the one you received as per Image?
As per Image. Cool.
Was the installation difficult?
It interfered with the welded bead on the body side, so I had to shave the bead and install it. I think it is an individual difference.
How was your experience with it?
I used it for the J-Trip endurance test, but it is difficult to maintain the rear caliper due to its position.
In particular, the Bolt on the front side of the Caliper will not allow the use of a normal length HEXSocket.
In the end, we decided on the Spool type.
View detail
Fits: KAWASAKI Ninja ZX-25R SE, KAWASAKI Ninja ZX-25R, KAWASAKI ZX-4R SE, KAWASAKI ZX-4RR
Easy to install
[How is it used?
Several months after installation
Was the one you received as per Image?
Yes.
Was the installation difficult?
It was easy
How was your experience with it?
It's just like I thought it would be, and I can use it to raise the Rear.
[Included Parts:were they on?
nothing special
[Was there anything that disappointed you?
nothing special
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
Notes
This slider is a little larger in diameter than the cheap sliders sold around here (about 22?), so you should make sure that the Y-shaped hook on the rear stand side will fit.
Initially, we were supposed to use a Y-shaped Hook made by DAYTONA, but it did not fit, so we ended up buying a new one made by J-TRIP.
View detail
Fits: KAWASAKI NINJA ZX-25R, KAWASAKI Z650RS, KAWASAKI Z650, KAWASAKI Z650, KAWASAKI NINJA650, KAWASAKI NINJA650, KAWASAKI NINJA ZX-25R SE, KAWASAKI NINJA ZX-25R SE, KAWASAKI NINJA ZX-4R, KAWASAKI NINJA ZX-4R SE
It has presence!
It has more presence when viewed from the SIDE than the common circular Stand Hook. It is highly self-satisfying. (Lol) View detail
Fits: TRIUMPH DAYTONA675, KAWASAKI NINJA400, SUZUKI , KAWASAKI ZX6R, KAWASAKI NINJA1000 (Z1000SX), KAWASAKI ZX10R, KAWASAKI Z800, KAWASAKI Z400, KAWASAKI Z250, KAWASAKI Z1000, KAWASAKI Ninja 1000SX, KAWASAKI ninja, DUCATI Late 999, HONDA , DUCATI 749, BMW S1000R, BMW S1000RR
Anodized or DURACON?
I bought DURACON because using Anodized Hooks inevitably results in Anodized peeling and scratching after use.
I purchased the black color and the scratches from use are not noticeable, but the black color is turning white due to sunburn.
In this respect, the White color may not be noticeable.
It is simple, so it does not have the same dress-up effect as the Anodized version, but I like the simplicity of the smallest necessary limit.
View detail
Fits: KAWASAKI ZX-14R, KAWASAKI ZX-10R, KAWASAKI ZrX1200ZrX1200 DAEG, KAWASAKI NINJA2 Helmet50RR
Logo is Accent
I bought this to use Rear stand on my zrx1200ZrX1200 DAEG.
I decided on this one because the Logo is cute.
Since it is DURACON, I think it is good without damaging the STAND.
I can't help but feel a slippery slope when I use it.
View detail
Fits: KAWASAKI Z1000, KAWASAKI ZX10R, KAWASAKI ZX6R, KAWASAKI NINJA400, BMW S1000R, BMW S1000RR, DUCATI 749, DUCATI Late 999, HONDA , KAWASAKI ninja, KAWASAKI Ninja 1000SX, KAWASAKI Z250, KAWASAKI Z400, KAWASAKI Z800, KAWASAKI NINJA1000 (Z1000SX), SUZUKI , TRIUMPH DAYTONA675
For Transporter loading
The GSX150BANDIT has a Center Stand, so maintenance is easy, but when loading the Transporter, it is better to use the Racing Stand and Wheel Clamp to hold the motorcycle in place so that the Tie Down does not have to be closed so tightly. However, when loading the Transporter, it is better to use the Racing Stand and WheelClamp together to hold the motorcycle in place, so there is less wobbling. View detail
ได้รับสินค้าแล้วสวยงามคุณภาพญี่ปุ่น เสียดายไม่มีสติ๊กเกอร์ติดรถแถมให้ ประทับใจครับของส่งเร็วเกินคาดหมาย View detail
Fits: KAWASAKI ZZR1400, KAWASAKI NINJA ZX-14R, KAWASAKI ZX-12R, KAWASAKI ZRX1200R, KAWASAKI ZRX1200DAEG, KAWASAKI ZRX1100, KAWASAKI ZRX1100 II, KAWASAKI ZX-10R, KAWASAKI NINJA1000, KAWASAKI Z1000, KAWASAKI ZX-6R, KAWASAKI NINJA250, KAWASAKI NINJA250R, KAWASAKI Z250, KTM RC250 (KTM)
It looks good Gold color
Is a spacer used, is the bolt longer or shorter? There was no Instruction Manual, so it was difficult for a beginner to understand. View detail
Material:Plastic is GOOD
Material:In the case of Aluminum+Anodized products, the Anodized Treatment will inevitably peel off, so the Material:I was looking for something Plastic. The installation feels good. However, if the surface of the HookBracket on the STAND side is rough, it will scrape the Stand Hook, so be careful. View detail
Fits: YAMAHA FZ1, YAMAHA YZF-R6, YAMAHA YZF-R1, YAMAHA YZF-R1, YAMAHA YZF-R3, YAMAHA YZF-R25, YAMAHA YZF-R1M, YAMAHA YZF-R1, YAMAHA XSR900, YAMAHA MT-25, YAMAHA MT-10, YAMAHA MT-09, DUCATI Monster 821, YAMAHA YZF-R6, YAMAHA YZF-R3, YAMAHA YZF-R25, YAMAHA YZF-R1M, YAMAHA XSR900, YAMAHA YZF-R1, APRILIA Shiver 750
Mainly used for maintenance
It works fine
Using it as a Slider is not a Recommendation at all.
View detail
Fits: APRILIA RSV4 RF, APRILIA Tuono V4 R APRC, APRILIA Tuono V4 R APRC, APRILIA Tuono V4 R APRC, APRILIA Tuono V4 R APRC, APRILIA Tuono, APRILIA Tuono, APRILIA Tuono, APRILIA Tuono, APRILIA Tuono, APRILIA TUONO V4 1100 Factory, APRILIA TUONO V4 1100 Factory, APRILIA TUONO V4 1100 Factory, APRILIA RSVR, APRILIA RSVR, APRILIA RSVR, APRILIA RSVR, APRILIA RSVR, APRILIA RSVR, APRILIA RSVR
Too bad about the type of Screw.
Installed on a Norton961Command.
I had been looking for this for a long time, and I wanted to install it as soon as it arrived.
The packaging was just the right Level.
When it came time to install the Bolt, the Tap on the Bolt was not installed.
Is there a bolt that is all cut and a bolt that is in the middle of a bolt?
Quantity:Pair (for Left and Right) If you think it's different, it's good either way.
So I had to give it 4 stars.
View detail