Reviews
Fits: YAMAHA XSR900, YAMAHA MT-09, YAMAHA MT-09 Tracer, YAMAHA MT-09 Tracer, YAMAHA XSR900, YAMAHA MT-09, YAMAHA MT-09
I'm glad I traded up.
I replaced it myself, but it was quite large.
However, the effect is outstanding.
It was amazing to be able to feel the change just by stepping over the Motorcycle before starting to ride.
When I drove the car, I could feel that the rear of the car was so soft and smooth on the road surface, whereas the normal suspension made the car feel fluffy and unsettled.
Sorry, I'm not very expressive. Crying
As others have mentioned, I'm a little concerned about the orientation of the Preload Adjuster hose coming out of the bottom side near the Engine.
View detail
A little difficult to put up.
I am satisfied with the Guard where my feet hit the ground when I ride.
One Primer is included for sticking, but I wanted to stick it firmly, so I bought the same Primer from amazon and applied it lavishly before gluing it. It is firmly attached without peeling off.
View detail
Essential for DIY maintenance
Recently, when I buy a motorcycle, I always buy the service manual along with it.
I don't do much tinkering with my motorcycle anymore, but I want to do at least some maintenance myself, so I think Torque Management is essential.
View detail
Fits: YAMAHA MT-09, YAMAHA MT-09 SP, YAMAHA TRACER9 GT, YAMAHA MT-09 SP, YAMAHA MT-09 SP, YAMAHA MT-09, YAMAHA MT-09, YAMAHA XSR900
Don't fall down.
Engine, FR/RRAxle, ClutchBox, Generator, etc.
There are various types of sliders and guards, but this time we installed a guard on both sides of the engine.
I don't want to test the effect too much, but first of all, I think it will be grounded first because it sticks out more properly than EngineUnit.
The foundation is made of Plate and Pipe of the genus Gold, and is attached to the frame, creating a certain degree of rigidity.
In addition, the gold plastic finisher with the Yamaha logo and the decorative spacer reduce the ruggedness that is often seen in the Guard and make it a stylish Yamaha-like product.
I don't want to be a burden to you, but I think it is a good choice to stock up on them as a fallback plan.
One point, the bolt at the stopping point on the front side of the vehicle may need to be Torque managed properly.
Incidentally, there is another YamahaOEM in the shape of a starfish, which is also a Quantity:I think it will be even more prepared if it is attached with a Set.
View detail
Fits: YAMAHA tricker, YAMAHA tricker, YAMAHA tricker, YAMAHA tricker, YAMAHA tricker, YAMAHA tricker
sure enough
I think the quality is good because it is a product of Y's Gear. It is difficult to install this product if you only own a Wrench. At least Wrench, Ratchet, Tie Wrap, and Nipper are necessary. The quality is good, so I am satisfied with the cost performance. However, I think the load limit cannot be relied upon in a good way. I think so. View detail
Windproofing and soundproofing effects are there.
This is a replacement from Puch Screen.
PoochScreen is Large type and will look forward over Screen.
The windproofing and soundproofing effect is very large, but on the other hand, in the rain, raindrops on the screen significantly worsen forward visibility.
This Screen is about 12 cm shorter than the pooch and has good forward visibility.
However, it was not as windproof and soundproof as expected.
It would have been nice if the front edge of Screen was 5 cm higher.
Of course, the effect is much larger than the OEM's initial Screen.
The quality of the Acrylic pooch is almost undistorted and you can see the front over the Screen, but this Screen looks slightly distorted.
In the middle of winter, when there is little rainfall, I think I would revert to pooch.
View detail
YAMAHAPerformance damper
After a short ride, I feel that the ride is similar to the ride immediately after the front fork is over-fallen, with a lighter steering action and a slight reduction in vibration. View detail
YAMAHA Side Bag Carrier
perfect fit for my Yamaha XSR 900 2022, I will be ordering more Parts and accesssories in the Futr. So happy with my purchase. Thanks View detail
![YJ-21 ZENITH[Zenith]Helmet](https://img.webike-cdn.net/catalogue/images/74608/907912364L00_TS.jpg)
Cheap Helmet, but I think you'll be happy with it.
My head size is 28cm and I used to wear a YJ-19 M size, but after wearing it for a long time, my head was tightened and it hurt. I bought a YJ-21 in L size thinking it would be comfortable as long as the size was right. I bought the L size YJ-21 and immediately drove it for about 2 hours. The wind cutting sound is even quieter. The amount of wind inflow during driving is clearly increased, and it is comfortable. The only complaints I have are that there is a certain smell, and when I tried to trade in my YJ-19, for some reason the Zenith Helmet was excluded. View detail
Prevent flooding from the ankles
[How is it used?
The length of the Rain Wear I normally use is short, and during a Large rainstorm, the ankle area flooded.
This was not a good idea, so I decided to buy a Cover for the ankle portion.
I chose it because it is made by Y's Gear and the price is low.
Was the one you received as per Image?
It was just like the picture.
How was your experience with it?
It is a little troublesome to wear Rain Wear because it requires a little more work than Rain Wear alone.
Rubber straps are inserted at the top and bottom, which are moderately elastic so they will not shift.
It is long and protects up to the knees, so it is unlikely that water will enter through the ankles with it on.
I am satisfied that it worked as I imagined it would.
[Points to note]
It is not necessary if Rain Wear is firmly attached to the ankle because of the time and effort required to put it on.
How did it compare to other products?
It is good because it is a Y's Gear product and inexpensive.
【Review】
This is a good product for people who get their ankles wet.
Naturally, shoes should also be waterproof, or if not, choose products with integrated shoe covers.
View detail
Very nice OEM quality
The tips are a perfect fit...and casually in the same color as my whells. Manufacturing is high quality ( unlike some chinese copies in the Internet) and it adds value to the Nmax. I'm very pleased! View detail
Great, beautiful product
Sau 2 tuần chờ đợi, đữ nhận được gói hàng. Đầy đủ phụ kiện, gắn lên xe đơn giản, có hướng dẫn đầy đủ, sản phẩm chính hãng yamaha. Đẹp hoàn hảo. Vote 5* ---------------------------------------------------------- After 2 weeks of waiting, Đu received the package. Full accessories, simple cars, full instructions, genuine Yamaha products. Perfect Beauty. Vote 5* Powered by Google Translator View detail
GlassesNG
good
The basic construction is solid.
It is smooth to put on and take off, and the head feels held firmly in place.
The chinstrap length is just right and the D Ring is easy to use.
Shield height can be set freely, and raising and lowering is smooth and easy to use.
bad
The ear area is a little tight.
No space for the glasses, making it difficult to wear them smoothly and causing ear pain.
I don't have Sun visor, so it's hard in the evening, especially on long distances.
Vent hole at the mouth was broken (no problem, so I continued to use it).
It is good for those who do not use Glasses and want an inexpensive, solid full face for short distances.
View detail
Could not be installed on 2LD1.
The seat does not close. The instructions say to adjust the mounting bolt if the seat is difficult to close, but the rear of the seat floats and cannot be closed without a lot of force. When opening, you have to push the back of the Seat with your weight on the top to open it. I am sorry to say that I will return it. When I put it back in the original Seat, it opens and closes normally. View detail
Necessity of maintenance
[How is it used?
I purchased this to recover and Restore a YAMAHA TZr50R from a Scrap shop.
I am thankful that YAMAHA publishes the Parts List on the Net, so I only need to purchase the Manual.
Was the one you received as per Image?
It was just as the Image said it would be. Without this book, I can't do detailed maintenance etc., so it's a necessity.
How was your experience with it?
I have another service manual for XJR400R, but this manual has more detailed explanations with pictures because of the different era.
[Points to note]
You can look for used products to purchase as they seem to be discontinued now, but be careful when purchasing as some of them do not contain all the information called Supplement.
View detail
Fits: YAMAHA TMAX500, YAMAHA TMAX500, YAMAHA TMAX500, YAMAHA TMAX500
Yamaha
Good afternoon. I really liked this product . 5VU variator belt for the second generation of TMAX . I ordered for friends . They really liked the product too . The quality is on top ! I highly recommend this product ! View detail
Yamaha
Good afternoon. I really liked this product . 5 GJ variator belt for the first generation TMAX . I ordered for a friend . He really liked the product too . The quality is on top ! I highly recommend this product ! View detail
Bal Thailand Adjustment
As usual, the Ex side is adjusted with GapGap It hits 8mm Glasses, so it can be used if the round head is shaved off The accuracy of the square hole is also delicate The weakest as a weapon View detail
Fits: YAMAHA WR250R, YAMAHA WR250R, YAMAHA WR250R, YAMAHA WR250R, YAMAHA WR250R, YAMAHA WR250X, YAMAHA WR250X
Refresh for the 15th year
I bought the Y's Gear exterior before it went out of print, because the Blue exterior of the early model was getting worn out. I also like that it looks like WGP 50th anniversary color. View detail
Fits: YAMAHA YZF-R25, YAMAHA XSR700, YAMAHA MT-09 SP, YAMAHA MT-09 SP, YAMAHA MT-09, YAMAHA MT-09, YAMAHA XSR900, YAMAHA YZF-R3, YAMAHA SEROW250, YAMAHA XG250 TRICKER, YAMAHA YZF-R25, YAMAHA XSR900, YAMAHA V-MAX 1680, YAMAHA V-MAX 1680, YAMAHA V-MAX 1680, YAMAHA XSR700, YAMAHA TRACER900, YAMAHA TRACER GT, YAMAHA MT-07, YAMAHA MT-09
GOOD OEM DC
It's a DC jack that was used in MT-07 in the past I purchased this MT-09 with a new addition, but it is easy and easy to install because it is connected to a genuine connector However, I think it's an outdated output because it's limited to 2A View detail