Reviews
Stop guessing and use this tool to set your oil level.
Easy to use, clear markings on the tube. My only complaint is that the tube and hosing can separate when attempting to push fluid out of the syringe back into the fork oil container too quickly and creates a mess. A small hose clamp might solve this. Another one of those tools you don't really need but makes the job of adjusting fork oil levels a no brainer. Between the dirt bikes and mountain bikes this will pay for itself and allow making adjustments much easier. And, if you can let your buddies borrow it if they buy the beer, it is a win win. View detail
Used during centrifugal Filter removal of Grom.
Items essential to remove the centrifugal Filter of the Grom.
Without it, the Filter cannot be removed because it is co-rotating.
I am not sure if it is an individual difference or a problem in usage, but I managed to fix the GEAR and it is OK.
It will probably appear only once, but if there is to be a next time, it will probably be when the Clutch is replaced.
I wish it were a little cheaper.
As an aside, I lost the one I had purchased and went in a hurry to a Motorcycle supply store to buy another one.
Please be careful not to lose it because it is small.
View detail
Takegawa Lock Nut wrench for CT70
Package arrived quickly and safely from Webike! This tool is a must for anyone replacing the clutch on old Honda CT70s with semi automatic transmissions. This will fit 1/2 drive socket wrenches or cordless impact wrenches. Tool is very useful for my as i needed to replace my worn OEM Honda clutch with a Takegawa Clutch kit also from Webike. Thank you Webike! View detail
It's easier to work with, but...
Found from WeBig's imprint.
I wanted to see it used myself and bought it lol.
I used it right away.
Certainly, the grease leaks less than the one I used to use. However, the grease spray inlet is too small to fit the grease spray that I have, and it leaked from there.
I wonder if it would be easier to use if I could devise a little more.
View detail
Fits: YAMAHA TZR50, HONDA BENLY50CD90, HONDA XL80, HONDA XR100, HONDA XL50, HONDA NSR50, HONDA NSR80, HONDA NS50F, HONDA NS-1, HONDA CRM80, HONDA MBX50, HONDA CRM50, HONDA CR80R/RII, YAMAHA TZM50R
KITACO after all
When I first bought a cheap one for about 2000 yen, the shaft was off and the tool wouldn't fit. This one is a little more expensive, but it fits easily and I regretted that I should have bought this one from the beginning. View detail
The Wire lube injector lives up to its reputation.
[How is it used?
Used for refueling Wire
Was the one you received as per Image?
Yes
How was your experience with it?
The lubricant reached the tip of Wire better than I had imagined.
[Points to note]
Note the direction of the wire's leak-proof rubber.
How did it compare to other products?
The unit price is high! But after using it, I am convinced. I don't think I will ever use Injector again!
Other items that would be helpful
Opinions and requests to Manufacturer I would like to see the rubber parts issued as Repair Parts, as their lifespan is unknown.
View detail
It is a product that will last for a long time!
The price is a little high, but the rubber part is also sturdy and can be used for a long time in a wide range of sizes. View detail
Fits: HONDA NSR250R, HONDA NSR250R, HONDA NSR250R, HONDA NSR250R
still necessary
Essential tool to remove GEAR to ask for CrankshaftOH.
It is possible to remove it with a piece of aluminum, but it is still this one.
View detail
Fits: HONDA CRF450R 2014, HONDA CRF450R 2015, HONDA CRF450R 2016
It is a Universal Shock Pump!
[How is it used?
It is designed for CRF450R, but since it is universal, it can be used for Shock Pump to inject into air suspension of Harley and for Motorcycle.
Was the one you received as per Image?
I was surprised that it was smaller than I expected.
How was your experience with it?
Even though the size is small, the functionality is not a problem. In fact, the small size helps when storing.
[Points to note]
Recently, many products made in China have been distributed, and there are many different products in the market, but the Gauge display is not always correct, or it may break immediately, so it is necessary to use the product many times as it ages. We will not be stingy and will recommend high quality products.
How did it compare to other products?
We do not trust Chineseness that can be broken quickly.
Recommendation for the maintenance of continuity.
▼The air valve shape is US-style, so it is highly universal. The size of the valve may not look like the size of a normal bicycle, but it is no different from the shape of a valve used on a normal bicycle.
View detail
As you tighten it in.
I use it for Caliper's rubout etc. When I tighten the Screw and open the Plate with 4POTCaliper like NC30, the Plate is not parallel and I can't get the 4 Pistons to be even etc.
The fact that it cannot be pushed in makes it difficult to use. The texture is good, so I would like to have the Guide of Plate as Quantity instead of 1 pc.:I am wondering if I should have purchased the 2pc one.
View detail
Versatile Holding Tool for your Maintenance Needs
About quality and texture: I am happy with the quality of the pulley holder from Kitaco made from a steel construction with a PVC coating over the band to help improve it's hold.About the feeling of use: I have used this tool to hold the clutch and flywheel on my Honda Grom when removal of these parts were required for maintenance with great success. The adjustable band makes this tool very versatile for varies sized motorcycle parts.Products to buy together: Some more tooling like a center lock nut wrench would also be desirable to purchase along side the pulley holder so when it comes time to remove the clutch assembly and oil spinner on your Honda Grom you have all the special tooling required to complete the job.Difficulty of installation: The process to install takes a few minutes, place the pulley holder around the part that needs to be held and adjust the band if required. Tighten down the T handle so that the band holder does not allow the part to spin as you undo the fastener securing the part. Not difficult to do.Cost performance and comparison with other products: Good costing as this is a quality made band holder from Kitaco that has with stood numerous usage without failure as compared to the first band hold that I purchased from another site that failed soon after.About shipping and packaging: The faster shipping options are too expensive for myself so I just have to wait for my part to arrive via sea freight. Webike kept me updated on the status of my order up to when it shipped. The parcel arrived within the expected date range and was well packaged with no chance of the part being damaged.Any concerns, cautions, or advice when purchasing: These band holder are limited to the sized parts they can hold. No smaller the 6cm in diameter and no larger then 12cm in diameter. View detail
Fits: HONDA MONKEY, HONDA MONKEY, HONDA MONKEY, HONDA GORILLA, HONDA GORILLA, HONDA GORILLA, HONDA MONKEY, HONDA GORILLA
AF24Giorno
Used for AF24Giorno.
Coil was easily removed.
View detail
Special Tool for CBR1000RRRSHOWABPFFork Disassembly
Special Tool for InnerCartridge removal of Big pistonFork. 90N tightening, so loosening is Large.
The Torque is tightened by hand and that's it. Why do you tighten it with such a stupidly strong Torque?
View detail
Special Tool during CBR1000RRRSHOWABPFFork disassembly.
Special tool required for removing and installing the top cap. octagonal. View detail
Another long Pin would be perfect.
Normally, I would expect to see a Pin that pushes out the Chain Pin and a longer Pin that pulls out the Chain Pin.
This one comes with only one type of Pin.
Therefore, it is necessary to push out two Pins, remove the Plate, pull it out and push the ThailandPin to the end.
That is a bit of a hassle, but for the price, this is what you get.
However, the fact that the tool is Compact is a Large change Good.
View detail
Required for Exhaust SystemJoint spring
Exhaust SystemJoint spring is a must for installation.
Don't be stingy and have one so you can install it without injury.
Recommendation
View detail
Good cable cleaning tool
Fits: Others , HONDA GROM, HONDA MSX125, HONDA MONKEY125, HONDA SUPER CUB110, HONDA CROSSCUB110
I don't want it in jc92Clutch.
I don't use it to replace the Clutch on my jc92.
Clutch lock nut is 19mm.
View detail
I can't use it for the slipped Clutch, though.
Cannot be fixed with Clutch that has started to slip.
When loosening the machine, I turned it with Impact.
If it's new and properly assembled, it will hold it firmly in place.
If it's not assembled right, it won't lock, so fix it in place to make sure.
Nut tightening check, I think it's good.
View detail
Genuine Honda Part.
This is the oil slinger flywheel tool called for in the factory manual. It's perfect fit and like every genuine Japanese tool Ive ever used including woodworking, It's flawless. View detail