Reviews
It's effective
It looks great and makes driving on the highway a breeze. View detail
Fits: Others
Universal windshield for mopeds! I think the cosmetic is good
I bought this in order to prevent the wind from hitting my body during winter commuting because the wind hitting my body is too cold even though it is a short commuting distance. I thought that I could use the current OEMShield for SWISH, but I chose this one because of the cost.
When the product actually arrives, the Screen Size is much larger than I imaginedMaterial:It was thicker than I expected for Acrylic. I chose Sumo & minus; Kukara & minus; but I think it was the right choice because the whole body looks tighter when it is installed.
I think it's worth the price when I look at the state of the plating and the welded part of the stay, but I don't mind because it seems to have no problem with strength etc.
The instruction manual that came with the bike has all the information you need. I think that it is good because I was able to reduce the wind that hit the body considerably though I actually installed it and ran.
View detail
Buy Shield
I bought the wrong item. But my wonderful friends managed to get it installed. View detail
It's all about how well you can apply it.
I bought the second model this time because I wanted to put Sticker on it.
What you need is a spatula, Dryer and MistSpray. (detergent + water)
Because Sticker itself is thin, even a little foreign substance sticks out immediately.
Don't put Garbage or Dustetc. and don't put it up or it will stand out.
I think you should prepare two kinds of spatulas.
Plastic spatula and spatula with Felt
Mist the back of the body and sticker with Mist and apply it.
Then wring out the air and water with Plastic spatula. 。 It's got a lot of curved surfaces, and it floats around when you squish it.
After I put it up and positioned it, I peeled off the Film.
I squeezed it. This is the best way to get used to it, but if you put too much pressure on it
It is good to roll and wring with Dustclothetc. because Sticker itself is damaged.
One other thing. I didn't notice this.
Image Image of the vehicle, Front cowl of your vehicle (Small part) shape was different.
Is there a difference between Taiwan Spec. and Japanese specification?
Image is flat and Taiwan Spec. is uneven.
I was worried about whether I could stick it or not, but I stuck it while stretching it little by little with Dryer.
View detail
Good quality
I replaced the Screen I was using because it became difficult to see with Scratch.
This product is very Shield. [Color] Clear and no distortion.
This time, I applied WAKOS Barriers coat just to make sure, and it keeps the condition at the time of installation at the time of passing one month.
On the downside, I had a little trouble installing the NeoFlexible Bracket.
View detail
Fits: Others , HONDA CB400SF, HONDA CB-1, HONDA CB750, HONDA CB400FOUR, HONDA HORNET250, HONDA HORNET600, HONDA HORNET900, HONDA VTR250, HONDA VRX400, HONDA CB1300SF, HONDA CB400SS, HONDA JADE, HONDA X4, HONDA CB1100, YAMAHA XJR400R, YAMAHA XJR1200, YAMAHA XJR1300, YAMAHA RENAISSA, YAMAHA R1-Z
Good looks, good wind protection.
I bought it because the wind of high-speed driving was hard in zr-7 (NAKED).
I think there is a preference for each person, but personally, NAKED and Bikini cowl were absolute NG for the purpose of seeing.
However, I want to avoid the wind, and I hate Meter visor more than Bikini cowl.
Among them, I found this one that can be sold with the painting done.
If you specify OEM Color, you will receive a quality that you would expect from an OEM Product.
As for the installation, it is quite tight as shown in the description, and there is a feeling of forcing it, but once it is put on, it is finished as if it had been attached by OEM.
And when I get on the highway, it's completely different when I have this, the wind doesn't hit my stomach and it's very easy, and by the way, the Tank Bag doesn't catch the wind and it's stable.
In general, Large was the right purchase, if you have the opportunity to ride the highway, it is worth considering the introduction.
(But I like it better when it's not there.
View detail
I'm so glad I bought it after much hesitation.
I had decided to buy this product, but do I need it? Is it effective? I've been thinking about it for a while, and after two months of wondering about it and reading other people's reviews, I decided to buy it because it was a little cheaper at SummerSale. [Color] Because it is Clear, the impression of the overall appearance does not change, and when I look closely, it is the feeling that the area around Meter became a cute MONKEY by Polished. The effect of the wind shield is not expected so much, but it seems to be effective enough for the protection of Meter, Wiring and so on. I'm looking forward to going back to Two Leaning. Glad I bought it. (^o^)
Although it was an order shipment, the delivery date was confirmed before the order was placed and the order was shipped earlier than expected.
View detail
Maybe better than OEMOption.
I didn't like the shape or the thinness of the plastic of the OEMOption box I saw at the Motorcycle store, so I looked around and saw this one with Carrier and a lower price.
I was worried because I didn't have any impressions at all and I had never heard of Brand, but I'm happy to say that the box is more solid than OEM.
I was pleasantly surprised to find that it even came with Cushion material (padding).
If I raise a difficulty point, the attachment hole of the Bracket for Carrier was slightly out of alignment, and it was difficult to tighten the screw.
This will be changed to a short Screw.
Also, I thought I needed to replace the Handlebar Weight that comes with the OEM, but after driving about 100km down the road, I didn't feel any negative effects, so I can say it's not necessary.
View detail
Wrold Walk Z900RS Exhaust Guard
First of all, there is no installation instruction manual.
The diameter of the body is too thick, so it cannot be installed depending on the shape of the silencer.
I was relieved because it was for Z900RS, but I was disappointed. By the way, the silencer is Yoshimura's Bure Screw (Slip-on Silencer Type), but the clearance was not enough and the silencer was slightly dented.
If you are considering installation, you need to check the clearance between Body and Silencer.
Satisfaction points are …
I don't have anything in particular to say about this, but it might be good for dress-up purposes.
The high price is unknown because it is not … rolling.
View detail
Screen for MT-09
I bought this because it was the tallest Screen for MT-09 that I have in my lineup and it was cosmetically very good.
I thought it was a large and kind manufacturer with the instruction manual with pictures so that even a beginner can install it.
Well, the windproof effect is outstanding. I think you can feel the effect even more if it is high-speed driving.
If I may say so, if the width of the Screen itself is a little larger, the wind may not hit your body!
View detail
Mounting on 2020
The 2020 has a different headlight position so the supplied bracket will not fit. The outer diameter is also different, so the Exactly will not fit.
However, Cowl itself has a good design and a beautiful paint job.
I didn't use the Fork Cramp that came with the kit, but used the 41mm Fork Cramp from DAYTONA, and because the screw hole is for M10, I also used the M10→M8Adapter from POSH.
Screw was attached with M8x35 of Cowl attachment, but because it is Limit, it seems that the length of 40mm is better.
View detail
It doesn't fit in 2020.
I bought it believing it because Manufacturer answered that it fits to 2020 in a certain Site.
On the 2020, the headlight is a little deeper than the LED, so the space between the headlight and cowl is about 30mm.
I will try to work it out through Bracket.
View detail
Wide space for installation
[How is it used?
Street Riding and Touring
Was the one you received as per Image?
Street Image
Was the installation difficult?
It is easy to position after temporarily fixing all parts
How was your experience with it?
Quantity at the front.:It is not suitable for those who frequently look at the phone because it is set and the line of sight is turned downward for safety.
[Included Parts:were they on?
None
[Was there anything that disappointed you?
Not very classy.
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
View detail
It can be used as an attachment bracket for various things.
Smartphone Holder and Power Supply Unit of SYGN HOUSE are installed.
I'd like to install ActionCam and Radar if I put it on One Side already.
View detail
Quality is good, installation manual is messy
The quality of the product itself, including texture, color, and accuracy, is quite good
The Initial Model 2-stroke can be installed with a little modification.
(We, unfortunately, a little wet because of the broad shoulders …)
I'm not complaining about the product.
However, the description in the Installation Manual is too strict for anyone other than the person who made it or someone with installation experience.
"You should have a mechanic work on it. but it omits too many steps anyway.
Comparison of the name of the parts with the actual one, the direction of the visor installation, the order of overlapping visors, the guide of the drilling position, the order of the Washer to engage the screw, etc.
This would confuse even an ordinary mechanic Level
I'd like to see a fuller description of the Others, including various hangs and cautions.
View detail
Fits: DUCATI SCRAMBLERIcon, DUCATI 1299 Panigale., BMW R1200RS, BMW S1000RR, SUZUKI GSX-S1000, SUZUKI GSX-S125, SUZUKI GSX-S750, SUZUKI GSX1000S KATANA, SUZUKI GSX1300R HAYABUSA, SUZUKI GSX1400, SUZUKI GSX250R, SUZUKI ST250E Type, TRIUMPH STREETSCRAMBLER, SUZUKI VANVAN200, SUZUKI BANDIT1250, SUZUKI DL1000 V-STROM1000, SUZUKI DL1000 V-STROM250, SUZUKI GRASS TRACKER BIGBOY, SUZUKI DL1000 V-STROM650, SUZUKI Intruder Classic
I haven't used it because it's too good to be true (laughs)
I bought this for my GSX, but it's too cute to use. Because I like cats, there are many cats such as Key Holder and Sticker, and it is one of the collections.
good point
Design, it's cute.
There are several patterns of expression, so please choose your favorite.
I think it can be installed on a large body because the size of the pad is not large.
A bad point
●No HaGap for cats.
If you are a cat lover, please buy it because there are not many MotorcycleParts with cats.
View detail
It's just right.
I installed it on my CT125, and it is just right without spoiling the design and getting in the way of driving. View detail
Ideal for Two-Ring
Mobile Holder with Cigar socket
Convenient
View detail
Perfect for PinionSeat and CarRear box installation at the same time!
I bought this for PinionSeat and CarRear box at the same time.
I was able to use the Universal Bracket from the GIVI box.
View detail
Size of Clamp is Small.
The size of the clamp does not fit the 1 inch Handlebar, so I had to buy it separately. View detail