Reviews
I used it to add to my on-board tools.
The MT-09SP's on-board tools are really the bare minimum. The hexagon is a whopping one size only.
I bought this Compact type because I was worried about what would happen if something happened to it.
It's KTC for one thing, but the texture isn't that good, it looks rusty.
So far, it has been used without any problems without rusting, and the Compact is very convenient to carry around.
View detail
Satisfactory to use.
Compact Quantity:The set is easy to store and the quality is excellent. It is easy to loosen and tighten by fingertips even in tight places. View detail
in order to increase the pressure on
I bought it to use with my current motorcycle with a very large number of hex screws, and to use it for retightening etc. You can use KTC's for peace of mind, and it is actually very easy to use. Quantity in the toolbox:If you keep 1 set in your pocket, it will come in handy when you need it. View detail
It works fine.
With the adjustments around the Handlebar, with the original KTC's that I have.
I bought it because the Arm was too long and could not be adjusted.
I don't feel like the accuracy is great, but it works perfectly. I don't feel like it's very good, but I can use it with no problems at all.
View detail
Long is handy to have too!
Short is good enough for Hex's Socket, but it's also useful to have Long around 5 or 6mm.
With Short Type and Ratchet wrenches, you can't turn the Flange of the exhaust pipe because the exhaust pipe gets in the way at some angles, but if you have a long socket, there is no problem.
Solid Handlebar and Quantity:If you use the Set, you can also apply torques, which will reduce the risk of the Bolt licking you.
View detail
The tools I use most often are KTC.
I love the often-used bit sockets such as 4, 5, and 6 millimeters, which are available in KTC.
It may seem expensive to buy at Rose, but it's cheaper in the end because you can use it longer and the Bolts won't lick it up.
It's good to use the right manufacturer's tools for the most common tools in important areas.
View detail
Good stuff
It is a good thing that I can use without anxiety though the 6mm is a good thing though I use it for Large. It is the one bought with the home center, but Bit comes a lot of things to pull out, I intend to change to the thing of KTC in the near future. View detail
It's a good costumer.
The product itself is high quality. However, there are two things that make it inferior to the Competition product.
1, Quantity from 2.5mm:Set. Especially 2mm has a good chance to be used with Small screws etc. It's too much trouble to keep a separate set.
2, Case and tool mating is loose. After years of use, it becomes ScauperScauper.
Other than these two points, I think it's a great product. And it's cheap.
View detail
If only it were a little cheaper
Bracket for attaching a Small TypeCamera to the Handlebar I bought it to do
The Wrench that came with the Bracket was difficult to use and I was closed off from using it, so I used the Ball point Use it
It is very convenient to turn quickly
It's KTC, so I trust the accuracy and quality, but if it were cheaper, I'd be able to use it
Cost performance is excellent
View detail
When you get used to it, you can distinguish size by color
This is handy!
When you get used to it, you can distinguish the size by color, so the work efficiency went up Also, it simply makes the look of Garage more gorgeous
However, the color itself is a paint job, so it will come off after years of use Even if you treat it roughly, it doesn't peel off so much, so it may be excellent
View detail
I should have bought it
Hexagonal Wrenches are numerous for some reason, and I didn't feel the need to use them, but Motorcycles these days have more and more points of use, and inaccurate wrenches There was a licking scene
It is used in the place to hang Torque, so I set it to Long, and I don't need the ball point I felt it but when I used it, it was convenient and easy to use in a small space
View detail
Safe to use
I used to use the standard length HexaGon bit, but now I'm going to move it to a more secluded location to do
I thought it would be heavy and hard to turn with Extension
(As a result, two more connection points will cause rattling and instability )
I really want to buy all sizes, but I bought the most frequently used size for the time being! It was
It's so easy to use!
View detail
It is convenient to have One set.
It is convenient to have One set on the tool box for Motorcycle Maintenance. At this price this quality is not a profitable item. It is made of DAYTONA and it seems to have durability. View detail
KTC is good!
Hexagon was a Socket faction, so I did not have a hexagonal stick, but I purchased it because the work in a small place is painful. Because it is thin, it exerts its power in a narrow recessed part. It's easy to use and is good.
However, it is better to use it where Torque is not applied so much as Torque is overloaded.
KTC is the best sense of fit when fitting a tool into Bolt.
View detail
Truly KTC
Where you want to tighten a little strongly, if you use cheap ones, twist is generated in Hexagonal Wrench and will not be used from the next time, but KTC was good to purchase. View detail
Large rinse
I bought it for car use Large rinse than I had thought.
Usability is not bad, so it is bulky, but I will put it in the Tool bag.
It is firmly made for the price. It is a tool that can be Recommendation if you do not mind Large
View detail
Long and easy to use
This type of Wrench had only in-car tools, but why is not Size suitable for Nut stopping Pedal of Clutch and RBrake for some reason .... Also, other than that, it was enough for the on-board tool, but it was short in my hands and it was hard to use (-_-;)
So, I bought Ratchet at Home center and used it, but it is troublesome to remove my head every time, and although Torque does not spend so much on my own with hexagon sticks, I need to put Ratchet and head part in and out I do not need it ... buy it. In short, Ratchet has become troublesome (Lol)
When purchasing, I made it to KTC that COSPA is good, but it does not seem to make a mistake. I do not want cheap, amazing!
result. Easy to use because it is long and easy to hold. You only need to grab this Set from the tool box. When buying it was not paying attention at all, it is very convenient that the edge of One Side is Ball type. Bolt You can fast forward while loosening. I did not want Ratchet unintentionally (Lol)
I think that it is a very good thing for beginners including myself. During ~ - I do not understand to advanced users because Kas Kill is not catching up ~ (; '∀ `)
View detail
If it is KTC, there is no doubt!
I bought it for use with Digital ratchet. In the Crankcase of the owned Yamaha moped Scooter, I used + Screw, and because Torque management by the service manual instructed, I chose KTC's Cross bit socket instead of the Cross bit socket of the cheap tool Manufacturer.
View detail
If it is KTC, there is no doubt!
I bought it for use with Digital ratchet. There are things of cheap tool Manufacturer, but I do not want to break Screw Mountain just like Cross bit so I chose KTC's Cross bit socket. View detail
It is a good product
I purchased this one and I am satisfied that the number of KTC's increased again
It is also a favorite that JAPAN is also solid making.
This product has a fixing screw at the place of Bit,
It seems possible to unplug and loosen up and down
View detail