Reviews
Fits: その他 , HONDA 400X, HONDA CB500X, HONDA CB500X
Mounting of mobile holder on HandlebarBlaise bar
What made you decide to buy?
The JC61GROM's HandlebarBlaise bar has no more space, and the Mobile Holder that had been attached to it has lost its place. So, we wanted to install a mobile holder on Hardy's HandlebarBlaise bar, which is also installed on the ZX-6R. OxfordCLIQRMotorcycle Handlebar Mounting purchased (Selected to be shared by two Motorcycles) The Handlebar Mounting bar I purchased has a handle size diameter of 22mm. The place where I want to mount the bar is Hardy's HandlebarBlaise bar, and the diameter is 13mm. It cannot be installed as it is. So, this time, we purchased Conversion ClampSpacer for DAYTONA13ΦPipe is Large active.
How was your experience with it?
The ClampSpacer is made of hard rubber material, so the opening of the rubber is hard, and although I was able to install it on Hardy's HandlebarBlaise bar without difficulty, it is better to warm up the material a little in advance with a dryer or the like to avoid cracks and damage if the material is opened too cold during this season. Once the ClampSpacer has been successfully installed, it is time to install Oxford's Handlebar Mounting, fix the cell phone to the mount, and install the ClampSpacer in the optimum position. (Meter is easy to see, keys are easy to turn, and in a position where they do not touch!) The end of the process is to adjust to
Also, due to the nature of the material, it will deteriorate due to UV rays and rainwater. It is necessary to periodically check the condition of the rubber to see if there are any cracks or deterioration, and replace it with a new one as appropriate.
View detail
Smartphone protection and peace of mind
You can rest assured that your Smartphone is protected and your safety is assured.
I bought the LSize because the M Size was sold out and I am wearing a Smartphone and it is a little difficult to handle because it is One sizeLarge.
I would like to focus on this product when used in the summer, as it seems to have good breathability.
View detail
KaEdia QuickHold
Holds at all four corners for easy viewing of the screen and driving without shifting the line of sight.
It is easy to use because it can be attached and detached with One-touch.
View detail
FirmlyHold and you're safe!
The price was reasonable and I was assured that it was well held while driving.
I thought it would be even better if I could make adjustments, etc. without the hexagonal Tool.
View detail
Smartphone Holder for Clamp Conversion
I purchased the Smartphone Holder to attach to the Bundle bars on my 250TR.
Smartphone Holder is a DAYTONA Smartphone Holder3
It is usable with Just fit as a matter of course.
The Spacer is rigid RubberMaterial, and it serves as a solid Spacer. It has never shifted position while driving.
View detail
Firmly held.
I bought it because I can rotate it 180 degrees and use it without interfering with the SIDEButton on my phone. (The phone is XPERIA)
Therefore, a Package picture is a Quantity:Pair (for Left and Right) I use it in reverse and have no problems.
The Hold is solid and the phone has never wobbled while driving.
To be installed on a 250TR Handlebar. DAYTONA:Conversion ClampSpacer was also purchased at the same time.
View detail
I put it on my insurance.
It is not used for KaEdia's Holder.
The two holders used were each from a different Manufacturer.
the best part
I don't feel it will fall off even if I don't use it, but if I use this one, it will be held tightly and may not fall off even if it falls over.
I only use it for two stops because it's a hassle, but it stops Firmly.
If the spherical thing on the back is in the Center, it can be used for almost anything, even if it's not KaEdia's Holder.
bad point
It is a hassle to apply and remove the rubber in four places every time it is attached or detached, and it is no longer possible to remove and detach SMARTly.
It is even more troublesome with Gloves on.
Cannot be removed instantly when it suddenly starts raining.
I couldn't find it in WeBig's product page, but there are 3 pieces in the package.
3Quantity even if you need 3 cars:Do not buy Set.
If you are a worrier who never wants to drop it, you should put it on.
Removal and removal will be troublesome....
View detail
I liked it so much I bought a different color
[How is it used?
I bought the Black one before and liked it so much I bought another one.
Was the one you received as per Image?
Yes, I have a new one. Buttons and lever were a little stiff, but I guess that is an individual difference.
How was your experience with it?
Very good. You can Mount&Release your phone easily.
[Points to note]
Nothing in particular, I have used it for over a month and have no concerns.
How did it compare to other products?
Other items that would be helpful
Installation points and hang/Items to buy together/ Opinions and requests to the Manufacturer
View detail
It looks nice.
I am satisfied with the quality of Silver.
It looks good even when the phone is not attached.
View detail
Fits: YAMAHA BirdCity, YAMAHA MAJESTYS, YAMAHA MT-03 (2015-), YAMAHA MT-25, YAMAHA MT03, YAMAHA Tricity155
By brute force...
Spacer is enclosed, but it may not fit a little with Handlebar sutra due to individual differences.
Since my vehicle is a 22-ply, I used a thicker spacer, but when tightening the screws, I had to use a lot of force while holding the ring that covers the handlebar down very tightly.
View detail
Shorter than buying separately.
I had been using Smartphone Holder3, but was afraid of recent Camera damage and was considering purchasing a Vibration Limiting Unit, so I chose this one when an integrated one was released.
The original one was installed on a Hara 2Scooter for commuting.
View detail
I would choose the phone.
I bought it because it is famous. I am not worried about it falling because it is firmly fixed.
However, due to its shape, there is a possibility that the button on the phone may hit the device, and while the Xperia5 had no problem, the AQUOS WISH had a button problem. Before purchasing, please pay attention to the position of the button on your phone.
View detail
Fits: YAMAHA BirdCity, YAMAHA MAJESTYS, YAMAHA MT-03 (2015-), YAMAHA MT-25, YAMAHA MT03, YAMAHA Tricity155
Purchase Repeat
It is a Repeat purchase because it can accommodate the size of LargeType Smartphones and smartphones that use Shock Absorption Covers.
I am using the Elastic band sold separately as a drop prevention measure, and it is probably Large sturdy. But just in case.
Since the phone is a bare type, navigation operation when waiting at a traffic light, etc. is also smooth.
View detail
Even with the phone Cover installed, I managed to get it to work.
I am replacing a Daytona MiKnowla OEM. When I changed my phone to Sharp AQUOSR6 and installed the Cover, the vertical side became 17cm, so I had to remove the Cover and install it when wearing Motorcycle for a while. It became more and more troublesome, so I purchased this product and it LimitClear even with the Cover installed. Personally, I think it is a good idea. Smartphone Holder I don't like the chunky Aluminum because I don't want the machine feel of the Aluminum, but the convenience is much improved. I don't feel like my phone is going to fly away when I use it, so I think it's up to par. If you have similar problems, I think you will not regret buying this product. View detail
Cool design and easy to install and remove
When removing a cell phone from a service station, etc., I used to pull the lock lever on the back to remove the phone, but it was troublesome and was getting harder and harder, so I purchased this product.
Attaching the phone is instantaneous, and removing it is as easy as pushing the bar on the side. I also felt that the phone shakes much less when waiting at traffic lights, etc., than the Smartphone Holder I had been using.
The design is not a common design, but a cool design for a Smartphone Holder.
issues with the Smartphone Holder we had been using. [Color] Not only does it Clear, but I think it is a satisfactory product in terms of design.
View detail
Removal is too easy.
[How is it used?
Bought this for my moped! Easy to remove when I want to use it for a little bit of street riding.
The Hold feeling is solid and so far it is safe.
Was the one you received as per Image?
As per Image. Good as expected.
Was the installation difficult?
It's easy! I was able to attach it to the Handlebar with the included hex.
How was your experience with it?
The phone can be quickly held and released, and removal is easy.
It is easy to do and is not Stress.
[Included Parts:were they on?
It comes with the matching Size and hexagon needed for installation.
Sticker was also included.
[Was there anything that disappointed you?
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
View detail
Smartphone Holder that looks SMART
Purchased to attach Smartphone to Motorcycle.
Apart from this, a UniversalSmartphone Case from SP CONECTO is used.
Removing and attaching the Smartphone is fairly easy and only requires a 90° turn. It is the fastest way to attach and detach a Smartphone.
There are similar products, but Advantage is the Large size in terms of quality and ease of removal and attachment with one hand.
It can be detached by simply rotating it, but there is no locking mechanism such as a turnstile, so some people may be concerned about it falling off. However, the
If it is firmly secured, it is unlikely to fall.
View detail
I've never used Elastic band with 4 fixed phone locations.
I'm using it now on 3 cars, R6, Z400, ktm, 350Off car, and it has never failed me. on R6, it has never failed me even in mountain pass and high speed. 。 I used to use it on my Z1000 with no Screen and never fell off even with the wind (I have the phone slightly tilted) (assuming I have never removed the 4 fixed Rubber points). View detail
Installation to Gixxer
I can only upload a few pictures, so here is the installation section.
Adjust the Screw→ of the Bracket to match the Phone.
I've seen a lot of Amazon Reviews. I tightened the screws and the plastic part broke off! The quality is too bad!"
but, well, I don't think so if you do it with normal additions and subtractions.
The upper part of the Body and the Bracket are joined by a grooved disk. If this is too tight, the Body cannot rotate freely horizontally or vertically. If it is too loose, the phone cannot be rotated freely.:When it is not set, will the Bolt come off and drop out due to vibration? Just right is Torque 3.6Nm, they say. Anaerobic adhesive (Screw looseness stop) I'll even use it …
I've closed this one too many times. I rotated the Holder and the whole disc cracked. or something like that (Lol)
I tried closing it by hand and got a good feeling, but there was no guarantee that it would not fall off even if I closed it with Torque 3.6Nm, so I decided to put rubber packing on it. It felt really good!
Cure with Tape, cut and fit the enclosed CushionRing.
Beyond this point, frame along the groove of the Ring. Tuning Screw." I just add or subtract the "+" or "-" to a good degree, snap it in place, and that's it. I don't even plan to remove it. Tuning Screw." to squeeze in Wrench.
Tilt angle adjustment with Screw above it
Cool!!! I couldn't post a picture of it. (Lol)
View detail
Mounted on ZX6R Tank Fixed Bolt
[How is it used?
ZX6R G type for creating a phone mount.
Was the installation difficult?
Simply remove and replace Bolt.
A separate M6 bolt of about 50mm is required.
The OEM fixed Bolt is M6 30mm.
How was your experience with it?
I used it to create a pedestal to hold the phone in place with Rec Mount.
Generally, I think that Multi Bar is often installed on ZX6R, but I chose this product because I wanted to make the steering area as refreshing as possible and did not want to put a large and conspicuous Multi Bar or Smartphone Holder on the ZX6R.
The Smartphone lock can be removed from the Arm when not in use, leaving only the ball joint. When not in use, the entire Arm can be removed from the Smartphone lock, leaving only the Ball joint.
[Disappointment.
The texture of the resin is poor and looks cheap.
It is fine for use, but it has a "Made in USA" feel to it.
[Notes]
Ball diameters may differ between Ram Mount and Rec Mount, so it is best to check for compatibility before purchasing. Some products are compatible.
After installation, Quantity:Pair (for Left and Right) The only thing that needs to be checked is that there is no interference with the Top Bridge when the Handlebar is cut to
View detail