Reviews
It's harder to sink into the ground.
Purchased to make it look more rugged.
It doesn't seem to be a CT125-specific product.
Mounting Bracket slightly interferes with Side Stand
I think that thin rubber plate etc. between the two will not scratch both sides.
The larger area of STAND
It's harder to sink into the ground, so I'm less careful when parking my bike.
View detail
Engine protector
I bought it because I wanted to protect my Engine from being scratched easily, even after just one stumble! I have not fallen over yet, but I put it on as an insurance policy. It is easy to install, so I recommend it! View detail
Perfect bolt-on side stand for NQ50 Spree
This side stand was easy to mount, and fit perfectly! It is exactly what you need if you AF-16 swap your honda spree! View detail
Perfect bolt-on side stand for SA50 Elite
This side stand is a perfect bolt-on solution to get rid of the center stand on your SA50 elite. The perfect side stand if you don't own a welder as it feels solid / secure when mounted. View detail
Short Stand
Short Stand is safe because the car body will stand up when Lowdown. View detail
Maybe I don't need Front.
I put it on a 2022 XSR900.
Some say it is better not to put it on because it may slip and aggravate the situation, but I assume it will fall over at low speeds.
I thought that the Protector has little protrusion, and since it has a Radiator, I think it is not so meaningful even if it is attached, since it is originally wide.
I hope you don't experience any effects.
Deep socket 10mm is Quantity:2pc. Set is required, so please be prepared.
View detail
stick out firmly.
I put it on a 2022 XSR900.
Some say it is better not to put it on because it may slip and aggravate the situation, but I assume it will fall over at low speeds.
The back seems to stick out and make sense. I hope you don't experience the effect.
Deep socket 10mm is Quantity:2pc. Set is required, so please be prepared.
View detail
Fast shipping to USA. Excellent tracking of order.
OEM product, fast shipping, excellent order tracking, good prices given the current US Dollar to Yen exchange rate. All good here! View detail
I like this more than OEM crash bar.
The engine guards are very nicely package and shipped to USA with no problems. There is very good craftsmanship on the welds and design. It is easy to install and looks great! View detail
Fits: APRILIA RS125, DUCATI MONSTER S2821, DUCATI Panigale 899., APRILIA RSV1000 Series, APRILIA RS250, YAMAHA , TRIUMPH DAYTONA675, APRILIA SL750
I went with Gold...
I bought it to go with the rear stand, but I think it would be fine with other Manufactures.
The color jumps with age when exposed to the sun, I think the same for the others.
If so, I'm glad it was inexpensive.
View detail
Does not fit Hunter Cub J65 vehicle...
I really like the quality and finish of the product...
It doesn't fit my hunter curve.
I searched and purchased it, but this was the first time I realized that there were separate markings of 55 and 65 in the model name.
Perhaps it was for domestic use or for export, but it did not fit the Korean stand.
That's too bad. -------------------------------------------------- -------- I really like the quality and finish of the product ... It doesn't fit my hunter curve I searched and purchased, but I first learned whether there were 55 and 65 notations in the model name. It was not suitable for the Korean stand, whether the domestic export was wrong. That's too bad. Powered by Google Translator
View detail
Lightweight skid plate!
This is a light Material:This is a Plastic Skid plate.
But it seems to be quite strong.
I chose ACERBIS Black because I don't intend to use it for hard use like TRIAL or attacking rocky terrain.
The body of the car is Color:Gray and Orange, so Black, the same color as the Frame, blends in well.
The installation went on easily without any positional issues. First, I applied grease to the screws and tightened them once only with screws.
When replacing the Oil, it is necessary to remove it, but it seems to take about 5 minutes.
2023 CRF250L Installed on 8bk-md47.
View detail
I like that the quick stand has a wider contact surface.
The stand has become wider, so it feels more sturdy, and the clamping force is good.
I don't think you should tighten it too much when tightening it. I think it would be good to give guidance on the level of tension.
The dress-up effect is also the best..^^
I will use it well.
ZETA is also good.
-------------------------------------------------- -------- The stand is wider, making it a bit stronger and good with a feeling of fastening. I can't tighten too much when I sign up. It would be better to guide the tension level. The Drone Up effect is also the best.. ^^ I will use it well. Zeta is also good. Powered by Google Translator
View detail
Exactly to crf250rally17in.MOTARD!
The OEMSTAND was in an upright position, but as expected of an exclusive product, it is Exactly. The Bolt is very hard to install, so you will have to have the right tools to lick it off.
Seat height is too low, so I am considering high seat!
View detail
Fits: HONDA CB1300ST, HONDA CB1300SB-SP, HONDA CB1300SF, HONDA CB1300SB, HONDA CB1300SF-SP
Purchased for protection in the event of a fall
I bought it in case of emergency.
However, the product I received was scratched and the plating was peeling, so I contacted the manufacturer directly to have it replaced.
I ended up removing it because I was worried that I would not be able to remove the Crankcase Bolt in the event of a fall.
View detail
Fits: HONDA REBEL250, HONDA REBEL250, HONDA REBEL250, HONDA REBEL250 S Edition, HONDA REBEL250 S Edition
I'm satisfied
I am satisfied with the quality of the product and the Instruction Manual, etc. If the bolt connection had been stainless steel, it would have been better. View detail
Spring hook is better to have
Even if you attach the rubber afterward, the spring is quite hard, and if you try to force it with a driver, you may accidentally damage the new STAND. If you have it, installation is easy. View detail
Universal Chain Guard from GBRacing for YZF-R6 2016
This was one of the last parts to get this bike as well protected as possible for the upcoming track days this customer had planned this year. This is a part that all UK tracks are essential for. If you do not have one on, you will not get onto the track. It's that simple. The chain guard we chose was a universal fitment as long as you have the threaded holes in the swing arm. Luckily, this bike has already got them. You can of course drill and tap out the threads if you do not have these. Anyway, finding he right part was super easy and I just referenced GBRacing website and what fitted this bike. The price from Webike was really good and as I already had a few biits I needed ordering, I got these from here. The cost of shipping is also cushioned with a few parts and not just the one. With EMS my order was delivered in 5 days from shipping. ALl my parts in this order arrived safely and no damage at all. This is generally down to just how well Webike warehouse pack the orders. Top marks folks. The chain guard is a simple part but the fin does actually stop your feet getting involved with the chain if you do come a cropper. The fin is really tough material. The bolts cast into the fin are solidly in there. No chance of those coming out. All together, this feels like a top quality part. I never had any thought of it being any different to all the rest of the GBRacing products anyway. Very pleased with this fit and hope the customer does not actually need it. Thanks Webike. View detail
Genuine GBRACING Cotton Reels for YZF-R6 2016
There were a couple of other parts that I wanted to get for project track bike which will help protect the bike if there is any accident. These are what I decided to get and the added bonus is that not only will they protect the swingarm but you use them to lift the rear wheel with a paddock stand. Dual purpose which is brilliant.I found the correct part numbers by checking GBRacing website and adding the model of bike. Very pelased to see that Webike also stock them, so purchased them from here instead.The price is roughly what I could get them for locally but I can count of Webike delivering my items on time and without a hitch. The outer box was sealed and the littel bit of empty space inside the box was filled with buble wrap. All my parts, even the samller ones arrived in perfect condition. The cotton reels came in their own box which was nice and touch so there would be no damage. They have a really smoothed out thread on the bolts which went in smoothly, not notchy or sharp edged. They attach to the mounting points on the swingarm with no issue. The cotton reels themselves are made from a special nylon I believe, don't quote me on that though but they are very similar to the others I have purchased. I tried them with my standard paddock stand and they are a perfect fit, no wobble like some other cotton reels so a very good product all around. Very pleased with the result. Thank you Webike for your hard work. View detail
Genuine GBRacing Frame Slider Set for YZF-R6
This bike came in and the customer wanted the full kit of protection for their bike as they were planning on taking it to the track this year. My very first thought was of course GBRacing as they are well reknowned for excellent protection. Webike do stock a lot of GBRacing products for various models and manufacturers. I found the correct part by cross referencing GBRacing website.The price was about the same as I could get locally but they did not have the stock, Webike did. With a few other parts, all shipped by EMS and arrived undamaged in 5 days.These crash protectors are a sturdy piece of kit. You can see that there is a lot of material to wear away before any damage can be made to your engine or surrounding parts. I personally have had a small low side and the crash protector did their job perfectly. With these added, this is what we are hoping for too. The machining is brilliant, very well presented. The bolts they provide which are of course longer than you remove are stainless steel so will be just fine. A word of warning if you do not already know, put a support underneath the engine itself. Just remove one side at a time or you risk the engine dropping and then you might come into difficulty. If all else fails, I do tend to have a jack under the rngine before I remove or even loosen any bolts for these items. Take your time, make sure you do not cross thread the bolts and you will be just fine. Torque to instructions and off you go. Thanks Webike, very happy. View detail