Reviews
c125 tanax30
I ordered it for the Honda Super Cub mirror extension. Order delivery time took about a week. Delivery time is average. It has not been installed yet, but the quality is good and it seems to go well with my Honda Super Cub. I ordered a gather ~~ I ordered this for my Honda Super Cub mirror extension. Order delivery took about 1 week. Delivery time is average. It has not been installed yet, but the quality is good and I think it will go well with my Honda Super Cub. I ordered only one by mistake, so I ordered another one. View detail
Fits: HONDA MONKEY125, HONDA DAX125, HONDA MONKEY125, HONDA MONKEY125, HONDA CT125
SP TAKEGAWA handle bar gurad
i bought a SP TAKEGAWA handle bar gurad I bought it to install GoPro. The installation method was so simple that it was easily installed. When the weather gets better, I am satisfied that I can install a GoPro and ride it. View detail
When I replaced the Mirror, it became difficult to see.
ZrX1200DAEG with Cross 2Mirror
I could only see my arms, so I installed them.
The angle needs to be adjusted, but it's much easier to see.
View detail
For those who are concerned about skimmers.
Dio110 (JF31) The Grip heater removed from the C125 (JA48) It is a little short for
But it would be a shame not to use it, so here it is. (5mm) and installed it.
If there is nothing else, there will be a gap between the Packer and the Spacer, but with this Spacer in between, I don't mind so much.
The hole diameter is adapted to the Throttle side, so the Left Side will be too large to fit. I used glue to attach both sides to the grip before installing.
Material:It's Rubber, so the texture is not uncomfortable.
Like this "A product to make a point." I think it's a very good thing that there are
View detail
Mirror's angle can be adjusted more widely.
The OEM mirrors on my Honda, Grom, and JC92 were difficult to see (and now that it's getting colder and I'm wearing a fuzzy jacket, I'm sweating even more because my body is reflected in the mirrors), so I switched to the Takegawa mirrors. So I installed a Tanax Spacer for height adjustment and this OffsetHolder, hoping for a wider range of Mirror angle adjustment.
With the OEM mirror, my eyes would often get tired, but now that the mirror is higher and my field of vision is wider, I can see behind me better and my eyes are less tired! I'm glad I did it, and I recommend it!
View detail
Fits: KAWASAKI 1400GTR, KAWASAKI NINJA1000R [Ninja]., KAWASAKI Ninja 1000SX
For Smartphone Holder
I installed it for the Smartphone Holder, and it is easy to install after removing the Handlebar on the left side, although it is coated with screw lock material, so you need a good tool. The product is very well made and the paint job is fine, I recommend it for USB power supply installation and Smartphone Holder installation. View detail
I need it.
I used it for FCR's Accelerator Wire. View detail
For gaps that bother you
If you're worried about the gap between the Grip and the Switch box, you should be. View detail
Products for Vehicle Inspection
[How is it used?
The Road Trucking Vehicle Law has been amended to require motorcycles manufactured after April 1, 1998 to be equipped with an always-on lighting system. My FZS600 is a reimport, but it is a 2003 model, so this law applies to it. However, the OEM (South Africa Spec.) state allows you to turn off the lights with a switch, so I bought this stopper as a measure against vehicle inspection.
Was the one you received as per Image?
The front side is flat, but the clasp on the reverse side has some kind of complicated shape.
Was the installation difficult?
Remove the screw from the Switch box, split the box up and down a little, and insert the StopperReverse side clasp into the groove on the Switch. The stopper is oriented so that the gentle corner of the front side faces the Right Side of the switch box.
How was your experience with it?
The light switch is now firmly in place.
[Included Parts:were they on?
There was none.
[Was there anything that disappointed you?
None in particular.
Other items that would be helpful
The mounting point and hang/material are plastic, so you should be careful not to damage the clasp on the reverse side.
View detail
It's easier to see behind me.
I ride a CROSS CUB with OEM Mirror, but when I adjust the direction I want to look in the back, half of my shoulders are depressed. Especially in the winter, it's very squishy... (sweat)
I was confused between this 30mm and 45mm type. I decided to go with the 30mm because I thought the left side would be covered with the head lamp switching switch.:Pair (for Left and Right) Both of them avoided the other parts, and Mirror got the picture just right!
This product is ordered one at a time, so please enter the Quantity:I wish I could get it cheaper at Set...
Bolt's Cap is sold separately. I bought an additional one, but this one is 2 Qty.:2Quantity by mistake in Set:I bought a set (4 pieces)... (sweat)
View detail
Fits: HONDA CB1300SUPER FOUR, HONDA CB1300SUPER FOUR SP, HONDA NC750X, HONDA CB1300SUPER BOLD'OR, HONDA CB1300SUPER BOLD'OR SP
Shaft for DAYTONA DAYTONA Attachment Cross Bar
These products are listed in the Honda Genuine Accessories.Catalogue.
The handlebar is black, so I decided to go with black.
I needed it to install Navigation and Camera.
Instead of placing the bar between the Clamp, place the bar on the top side and the Bolt is from the bottom.
View detail
Fits: HONDA NC750X, HONDA CB1300SUPER FOUR SP, HONDA CB1300SUPER FOUR, HONDA CB1300SUPER BOLD'OR SP, HONDA CB1300SUPER BOLD'OR
Clamp set for DAYTONA DAYTONA Attachment Cross Bar
These are the Parts specified in Honda's OEMAttachment.
I added a USB Socket from DAYTONA and external Navigation and ActionCam.
RAM Mount is a good match.
View detail
You're right to wear it.
I couldn't see behind me until now. (LAUGHS)
After installing it, I can see some of it.
Of course, you need to pay attention to 360 degrees while driving, right?
If you can't see it, it's dangerous.
We want to reduce blind spots as much as possible.
I can't deny that it's a little stiff, but it was the right decision to wear it.
This kind of thing of Tanax…Even the screw part is painted thickly, so I'm worried about it because it doesn't feel tight as Snap, but I can use it anyway.
View detail
It looks good!
I am a CROSS CUB rider.
OEMMirror is your body type (Short legs, long torso) However, when I raised the height with the Spacer of Napoleon as well as this product, it was considerably improved.
View detail
It's easy to check behind you.
I'm currently replacing it with a Takekawa Mirror, but it's still hard to see backwards.
This time I added a 45mm OffsetHolder.
It will look a little ugly, but it will make it easier to do a backward check, and Stress
has been reduced. I would recommend this product to anyone with the same problem.
View detail
This is a large adjustment to avoid ruining the Clutch.
When I tried to adjust the Clutch at the time of purchase tailoring, I found that the existing Adjuster was crushed, so I replaced it.
It is inexpensive, but it can be used as well as OEM. This manufacturer is strong in the old car system, so it is safe.
good point
It's inexpensive and doesn't take long to get.
It's the same dimensions as OEM, so it won't be a hassle to replace.
I've been riding it for about 4 years since I put it on, and it hasn't hurt at all.
When you start to do maintenance by yourself, you will start to worry about the details such as Lever and Adjuster.
If it's crushed or damaged, you shouldn't hesitate to replace it.
If the clutches are not adjusted properly, it can lead to failure.
View detail
Thank God for Repair Parts.
[How is it used?
I bought this part because I found it at home somewhere.
Was the one you received as per Image?
As per Image
Was the installation difficult?
Just install it where it's missing, put the Spring firmly in the hooking hole, and tighten the Bolt.
How was your experience with it?
It's back to normal, no plop, and it's coming back after falling in a forward direction.
[Included Parts:were they on?
Not particularly
[Was there anything that disappointed you?
Not particularly. Unlike other Manufacturers, it's helpful to have these Replace parts available.
Other items that would be helpful
Recommendations are made frequently to avoid dropping them as I did.
It was more difficult to ride than I expected when the clutch lever plucked during the race … lol
View detail
It's a very ordinary Heat Shrink Tube.
Used to fix a wrap-around Grip heater.
I used to use a common Heat Shrink TubeTube that is also sold at Home center, but I was a little concerned because it was slippery or compatible with Glove.
It's in the product description.
The surface is designed to be non-slip and secure.
I bought this book because I was attracted by a sentence that says
In conclusion, it is the same with Large. Rough operation, if you are not careful, it will slip.
If you don't care about the manufacturer or the pattern, Recommendation is not for you.
I bought a cheap heat gun from Amazon for installation. (It's not that hot) I worked with it, but this product was easier to shrink and I had the impression that it was less loose when I heated it up again using the Grip heater.
Overall, I don't recommend it, but I think it can differentiate itself from other users who use Heat Shrink Tube. The price is a little bit high.
View detail
it is normal
It is a small part, but it is helpful to have Lineup.
The difficulty of the exchange was low and it took a short time.
View detail
Fits: Others , HONDA MONKEY125, HONDA CL250, YAMAHA XSR125
Fat Type Cable Adjuster
About quality and texture - Excellent quality, went away from the OEM zinc plated one to this lovely black andised one. About the feeling of use - Works really well, nice smooth operation when clutch cable adjustments are required. Products to buy together - If you are looking for more bling the SP Takegawa main switch cover is nice to complement this part, product # 05-09-0046. Difficulty of installation - Easy installation but does also require a clutch cable adjustment afterward. Cost performance and comparison with other products - Good value for money buy here and looks to be priced a little cheaper then the other brands. About shipping and packaging - Cheap and fast, arrived in a week and had plently of protection from the air pillows. Any concerns, cautions, or advice when purchasing - If you can not decide one which colour you prefer buy them all and swap them up ever now and then. View detail