Reviews
Fits: KAWASAKI ZRX1100, KAWASAKI ZRX1200R, KAWASAKI ZrX1200ZrX1200 DAEG
Easy
Very easy to install. I am happy with the way it looks. I liked the little Accent feel. View detail
Fits: KAWASAKI ZRX1200R, KAWASAKI ZrX1200ZrX1200 DAEG, KAWASAKI ZRX1100
I like Carbon!
Carbon is very good!
I have Active's BigRadiator on, and I found that the OEM Fender requires a cut, but this Fender does not require a cut.
It looks a little crooked when viewed from the front. Fine adjustment is needed.
View detail
Fits: YAMAHA XSR900 , YAMAHA MT-09 TRACER, YAMAHA MT-09, YAMAHA MT-09
If Twill Carbon can also be selected in this Style, it would be a perfect score.
The only regrettable point is that Striker is only available in plain weave, while many manufacturers offer a choice of twill or plain weave for exterior carbon parts.
I am satisfied with the design, the texture and the detail of the construction.
The Webig product page says it is 5 cm long, but it is actually about 19 cm long.
(Check with Striker's Home page before ordering)
This length is also good to make it Cover to the keyhole part of the Seat lock.
I also wanted to replace the OEM PeLePera Chain Cover.
View detail
Fits: YAMAHA MT-07, YAMAHA MT-07, YAMAHA XSR700, YAMAHA YZF-R7
Good looks, good quality
We were going to use the Engine Guard from Company D, but were dissatisfied with the design and the quality of the mounting bolts, so we considered this product because we had previously used it on the MT-07.
The Black Anodized has a nice texture and I am satisfied with the quality of the Bolt.
Installation on XSR700 2022, but Blinker will not be able to protect Blinker since Blinker is more outside w
View detail
Excellent design
I bought a set of these striker rear sets for my 08 CBR1000RR. They are very nice. Great machining, adjustable, yet with the option to retain the stock peg position, includes provisions for the OEM brake light switch and the OEM rear brake fluid reservoir. Will definitely recommend these to others! View detail
Thank God it's cheap.
I had trouble with the Maverick one because it was too short, but this one is longer and easier to operate! View detail
Moderately Back & Up, ideal for STREET
The first thing I thought about when choosing Rear Sets…
OEM stop lamp switch must be available.
MODEL with heel plate attached
? Something that can be popped on and won't cut the side cover.
Repair parts must be sold and option parts must be available.
STRIKER was selected based on the following factors
The product comes in RoseRose out of the box, and since it does not come half-finished by BEET or OVER, it is necessary to assemble it while looking at the development diagram and using screw lock agent;
It was easy to assemble and install on the car without any trouble.
From among the 3-position choices
1)30mmBack/20mm Up
2) 40mmBack/20mm Up
3) 50mmBack/20mm Up
5 cm Back of #3 to 2 cm Up…
It is easy to ride in the street, and the moderate up-and-back position gives a smooth and tight pedal movement, and although it is snow season outside, you will be able to enjoy writing from 300 km touring to urban area without getting tired.
View detail
Black Anodized Finishing, so it can be used as a one point of color.
STRIKER's Footpeg Kit is Black Anodized Finishing, so it is all black…
The black anodized footpeg on a matte black body color is not very appealing, so a red pedal end was purchased separately and installed when assembled.
The red color anodized with other PIRANHARed products made it one point of dress-up for the Rear Sets with good parenthesis.
View detail
The texture is good!
The installation was easy, even for an amateur. I have run about 100 km after fine-tuning the handlebar angle, but I will do a test run after readjusting the handlebar angle and if it still doesn't feel right, I will consider replacing the handlebar.
It's like
But the texture and feel are very good, so I'm glad I bought it.
View detail
Good Grip feel.
The mother footpeg is Baby Face, but I use Striker because it is compatible with footpeg. I like the feel of the controls and how it feels when I step on it. View detail
Fits: YAMAHA XSR900, YAMAHA MT-09, YAMAHA MT-09 SP, YAMAHA MT-09 ABS
Striker
Striker's Rear Sets are great.
At first, I didn't like the silver color of the OEM footpeg, so I bought Striker's Black Rear Sets, but after installing them, they fit perfectly.
It was a bit tricky to pull out the pivot shaft when replacing it.
I think the best thing to do is to hang the body of the car.
There was no place to hang it, so I had to poke it from below with a Jack.
I did it with a hydraulic jack, but I recommend the Pantograph jack because it allows for more fine tuning.
I had to make a few adjustments while riding, but Change is now entering ScauperScauper.
Did you replace the upper part of the Quick shifter and use the Lever's principle to go in lighter? I thought so.
It is pleasantly easy to enter.
It may be my imagination, but I think the Rear brake also seems to work better.
Even if it's just my imagination, it's not Demerit, so …
There is Merit but no Demerit.
The only thing I can think of is a Pivot shaft for replacement…
I bought Rear Setsfootpeg just for its looks, but I am glad I did.
Recommended
View detail
STRIKER Striker Special Footpeg Kit
[How is it used?
We purchased the product in January 2020 and have been using it ever since.
Was the one you received as per Image?
Since the Frame is Black, we matched the color.
Was the installation difficult?
Anyone who can read the Instruction Manual can do it.
How was your experience with it?
Duralumin is used, so it will not become if you step on it too hard.
[Included Parts:were they on?
It comes with parts to reverse shift and a shift rod that can be used with the Honda OEM Quick shifter.
[Was there anything that disappointed you?
I knew this before I purchased the product, but the Shift rod is crossing the Frame, making it harder to STAND.
Other items that would be helpful
A short Shift rod, 120-130mm long, allows for OEM-style mounting while still using the Striker footpeg.
View detail
STRIKER Striker Guard Slider
[How is it used?
I bought it in January 2020 and am now replacing it with a babyfe.
Was the one you received as per Image?
It didn't fit with Image a bit.
Was the installation difficult?
It's very easy.
How was your experience with it?
Fortunately, we never had to take care of Frame Slider.
[Included Parts:were they on?
Instruction Manual
[Was there anything that disappointed you?
In the event of a fall, I was worried that the Frame would take the impact of the fall at one point, so I replaced it with a 3-point support BabyFe.
Other items that would be helpful
Tightening Torque is 49N and Torque as per service manual.
View detail
Fits: SUZUKI Hayabusa (GSX1300R Hayabusa)
Recommended for touring as the position is loose.
This was my first time installing Rear Sets and it took quite a bit of time, but I managed to get it installed.
The Instruction Manual is simplified, so we used Net videos and other resources for installation.
It is a looser Position than other Manufactures, so it seems to have no problem with Touring.
View detail
Fits: YAMAHA MT-09, YAMAHA MT-09 To Racer, YAMAHA MT-09SP, YAMAHA MT-09
Looks well made.
It is a well-known name, Striker, so the product seems solid.
The Bolt part is black, so it's a little bit expensive;
Tightening Torque is like 45N.
It was so low level that I thought, "Is this what it's supposed to be like? It was a Level that I would say "this is what it is like.
In the meantime, I painted 243 of Locktite.
I hope it will not be used because it is a talisman in case of moss.
Also, I wish the price was a little lower.
View detail
Fits: HONDA CB400SB, HONDA CB400SF, HONDA CB400SF, HONDA CB400SB
CB400SF NC42
I installed it on a 2014 CB400SF.
I drive around town and touring is my main use, so this is just the right position for me! 。
By the way, Crevice has been changed to an external one, so the RODPin that came with it was not long enough, so I had to make it on a lathe. lol.
Also, I changed the Hook bolt to one made by KFACTORY, so I couldn't use the Silencer Bracket that came with it ….
So I bought a Silencer Bracket, also made by KFACTORY.
I am currently considering whether to use Tandem Footpeg in Silver or Black.
View detail
Fits: その他 STRIKER Step Kit Series Sport Touring Concept "STC" Step Kit, その他 STRIKER Step Kit Series Special Step Kit, その他 STRIKER Step Kit Series Sport Touring Concept "STC" Step Kit, その他 STRIKER Step Kit Series Special Step Kit
Footpeg for Race bar with the best cosmetics
I use it on my Mini bike Racer.
Previously KFACTORY's Footpeg for Race bar
https://www.webike.net/sd/24051006/
I used to really like the "Racer" on my Large type Racer, but this one is cheaper and shorter, so I think it is better suited for Mini bikes.
Grips very well.
View detail
Fits: KAWASAKI Z900RS CAFE, KAWASAKI Z900RS
If you are a Cafe rider, Rear Sets is the way to go!
I chose silver because I thought the color would peel off if I used black for a long time.
The texture of the actual product is Large change better than the sales photo, and the color is good.
30mmBACK/30mmUP is the largest adjustment, so I set it to the largest.
Combined with the Cafe's forward leaning posture, the position became very good, increasing the sense of combat stance.
If you are a Cafe rider, I highly recommend installing Rear Sets.
Also, in NORMAL, the footpeg hits the calf when the foot is lowered, but this is reduced and comfortable in LARGE.
I am satisfied with the Large change because it is easier to operate, and the hold feeling with the heel plate is better than with the Normal plate.
I installed it myself but had a hard time.
However, I was able to start working on the project after preliminary study with YouTube videos uploaded by our predecessors, which helped Large change.
View detail
![Striker Step Kit [Striker Step Kit] Type2](https://img.webike-cdn.net/catalogue/10607/ss-aa262b_TS.jpg)
Fits: YAMAHA FZ1, YAMAHA FZ1FAZER
It looks Parenthesis better.
During installation, the Brake master was stuck and the Pedal would not return, so I put two pieces of Washer between one Bolt and the MASTER.
Right SideStep base only 1 pc Bolt on the underside of the base
It was 5mm long, so I changed it to a shorter one and put it on.
View detail
Fits: KAWASAKI Z900RS, KAWASAKI Z900RS CAFE, KAWASAKI Z650RS
Just because it's handmade.
[How is it used?
Tandem, Luggage Binding
Was the one you received as per Image?
Yes
Was the installation difficult?
The Screw holes do not fit slightly because it is handmade Quantity:Pair (for Left and Right) is slightly different
How was your experience with it?
Looks outstanding! Light! Thick!
[Included Parts:were they on?
Yes
[Was there anything that disappointed you?
I expected it, but Quantity:Pair (for Left and Right) Target feeling and Screw hole for
Other items that would be helpful
Point or hang of installation/None in particular
Instruction Manual is available! Bolt for 650 and 900 is included!
Notes/Quantity:Pair (for Left and Right) The shape is slightly different.
Items to buy together/None in particular
Opinions and requests to Manufacturer I would like to have the price a little lower.
View detail