Reviews
It's just gorgeous!
It goes really well with SV650X hhh It's fast and easy to install and it's good! But the canopy part on the top looks like it'll scratch easily. View detail
Fits: HONDA GROM, HONDA CROSS CUB, KAWASAKI Z125, KAWASAKI Z250, KTM 390DUKE, YAMAHA YZF-R25, Others
Exactly to GROM
It was Exactly in Glom.
It is not so obtrusive as one might expect, although it cannot be moved too far back due to the Blinker bumping into it.
The second seat extends to the Both Sides, which also expands the loading space there, and thus expands the possibilities of a small Grom to a large Grom.
View detail
Fits: KAWASAKI Ninja1000, YAMAHA YZF-R25, HONDA XR250, KAWASAKI NINJA2 Helmet50 , HARLEY-DAVIDSON XL1200S, KAWASAKI Z1000, KTM 390 DUKE, KAWASAKI ZX-6R, KAWASAKI ZX-10R, SUZUKI GSX-R1000R, YAMAHA MT-01, YAMAHA R25, Others
The storage capacity is very different without it, but be careful when getting in and out of the car.
I don't want to put an extravagant bag on my motorcycle as much as possible, but when I go out for a short trip, I really want to bring some souvenirs. So, with this kind of bag, you can do what you can do.
The design is not particularly different.
Keys must be purchased separately.
However, as I have short legs, I have to be careful not to catch my foot or lose my balance with one foot when getting on and off the motorcycle, and I also have to be very careful about the foothold (angle, etc.) and fatigue when stopping.
With or without Bag, Oops & hellip;! If it becomes "too late," it will no longer be possible to make it.
View detail
It's not bad, but there's no outstanding ingenuity or functional beauty.
I think this is a dead feature, although it is mentioned that it can be adjusted according to the Bottle width.
The construction of the Screw part seems to loosen easily if it is tightened frequently and repeatedly, so it cannot be used extensively.
The holder is recommended to be semi-fixed with a width that allows a 500ml bottle to fit in the limit.
If possible, I would have liked to see consideration such as a strong Spring type to make it easier to adjust the width.
Also, when installing a Short Screen on a car body or near the Grip, the Tumbler of ConvenienceCoffee, for example, must be careful because the container, which has lost its contents and become light, can easily be blown away by the driving wind, effectively littering the area.
I must say that if the Holder is not able to hold it securely until you throw it in the trash yourself, it is not a very good drink holder.
I would like to see a mechanism to keep Hold on the Bottle.
Also, if the Handlebar is installed as is, it will scratch the paint on the Handlebar, so I think it should at least come with a weather-resistant rubber plate.
After about three years of use, there has been almost no deterioration, and the product seems to be made to be resistant to rust and deterioration, so the durability aspect is promising.
View detail
Seat bag
It has enough capacity for a 4-day/3-night touring trip and is easy to install and stable. View detail
Fits: KAWASAKI Z900, Others , YAMAHA WR250X, YAMAHA FZS600FAZER, YAMAHA FZ1 N Japanese specification, TRIUMPH DAYTONA675, SUZUKI GSR400, SUZUKI GSR750, KAWASAKI ZRX400, SUZUKI B-KING, KAWASAKI Z400, KAWASAKI Z1000, KAWASAKI NINJA650 , HONDA XR250MOTARD, HONDA PCX150, HONDA CB400SUPER BOLDOR, HONDA NC700S, HONDA CB1100, HONDA APE 100, DUCATI MONSTER1100
Wish I had purchased sooner.
I had been carrying a 15 LClass Back on my day-trip touring, but I felt completely different fatigue with this Back.
The correct answer to reduce Rider's burden would be to not attach anything to his body.
We feel that if this Gold amount would have made things easier, we should have purchased it a little earlier.
View detail
CBR600RR/Size feel is good.
I was torn between MT and GT, but MT was the right choice in terms of size. The KBelt certainly has no gap, but it is a pain to deal with the excess Belt (roll it up and bind it with Velcro). I heard that only this Belt is different on the new model, so it would be better to go for the old model at a discount. View detail
Just right for Touring
I had been using a Hip bag to carry my Wallet and phone, but I was concerned that it was a bit bulky when walking to and from drop-offs, so I bought this Leg bag to try it out. I bought this Leg bag to try it out. In fact, it fits my phone and long Wallet with room to spare, and it also holds my Mobile Battery. Moreover, the capacity can be expanded with a fastener, so it holds more than I expected. I'm glad I bought this bag because it doesn't bother me at all when I walk when I get off the car. View detail
TANAX Euro Seat Bag 2
TANAX Euro Seat Bag 2. I Ordered on Saturday Evening and delivered in the UK Wednesday incredibly fast delivery. Fitted to Bike Z900RS in under 5 Minutes, Looks the part, is stylish and easy to remove to carry with you, and turns into a back pack, it is Ideal for carrying a few things for overnight trips. also has a waterproof cover included. View detail
It is like a dedicated Spec.
Could we manage the Z's loading capacity Zero? Wouldn't it be cooler in summer touring because my back would be free from the backpack? I have been thinking about it a lot, and this Off-roadTank Bag has become a satisfactory form for a large body.
We were also introduced by an old Grom driver who was almost satisfied with this back, and we installed it because we thought it would not fail from the Size of the back.
As you can see in the picture, it looks like an exclusive product. The back is fixed with a Belt attached to the SeatRear, and the front is fixed with a Carry Belt hooked to the BulkHeadRearFrame, with no contact around the Handlebar and no effect on intake air.
Gasoline refueling was also easy, as the back front can be lifted by removing one of the front belts and the lid can be opened and closed without difficulty.
It is not a large capacity bag, but it can hold a long wallet, coin purse, driver's license, compact rain gear, wind breaker, compact SLR camera, smartphone, and plastic bottle.
I carry the above contents in my Boday pack, but I managed to fit the whole backpack in there.
There is also a Coin PurseSpace in this BackRear and a storage space on the Reverse side of the ceiling.
I am a Touring mappleR user, but MappleR does not fit as described by the manufacturer, so do I need to prepare a NORMALMapple or use a 1:50,000 map? Or should I use a 1:50,000 map? Crying I think it will take some getting used to, and the fact that it will be stored from BackFront.
The beauty of the Off-roadTank Bag after installation is that it is mounted on the lower part of the stomach, so it does not interfere with the STD Handlebar or the Handlebar with a little fine adjustment. (My car is equipped with Takegawa's AluminumPipe handle) The pressure feeling is also good with Zero and Large.
The installation position is unexpectedly on the SeatFront, which is convenient for me who sits on the SeatRear, and it seems to play a role in fixing the position when driving as a substitute for a tank extension cowl.
The Rain Cover is just right for rainy weather and hangs on the handlebar, and it has a moderate closure. It is a thing that will not fly away like a Rear Missile.
I am not a TANA-X representative, but as a fellow Z125PRO rider, I would recommend it to anyone who is having trouble with loading.
View detail
Good Tank Bag.
It is very good, but it is a little difficult to use because the handle of the bag does not come to my side when it is attached to the Motorcycle. On the other hand, other than that, it is perfect. View detail
Movable flap with sucking disc to secure the well
Purchased for my phone.
The good thing about the Suction Cup
My motorcycle is a steel plating tank, so I was looking for a suction cup type because of the risk of damage with a magnet.
The suction cup at the bottom of the center of the bag is not usable because it is attached to the tank belt, and it is unnecessary.
And the Flap of Both Sides was Firmly and strongly attached with the two Suction Cups (standard position) in parallel with the Tank belt.
Less Risk of Wound worn in Suction Cup
Suction Cup position can be freely moved for easy installation
Suction Cup Repair Parts from TANAX are readily available even if the cup deteriorates.
● The feel is fine if you only use the phone.
The latest large smartphones can also afford it, [Color] Touch screen from the clear surface is also available, but it is difficult to operate in detail.
Also, if the phone is covered with a Glass-type protective Seat, the Touch response will be poor.
Bag can be mounted either horizontally or vertically
Easy to attach and detach the bag with just a hinel.
When placing it horizontally, the handlebar should be placed a little to the rear because it will hit the bag if the handlebar is fully extended.
When I installed the bag vertically, the handlebar did not interfere with the bag when the center of the bag was placed over the fueling port.
In any case, you have to lower your eyes to look at the smartphone screen while navigating, so you have to be careful when moving forward.
Smartphone holders can cause camera failure due to direct vibration to the smartphone, but this backer suppresses vibration, so there is less risk of failure.
I think the smartphone thermal runaway Risk will be higher in the summer, so please be careful!
View detail
It was the right purchase.
I have been using a SeatBack of about 4L from another company, but it was too small for my wallet and cell phone... I carefully examined the products this season. The K-SYSTEM BELT is easy to use and has a satisfactory load capacity. It is a good SeatBack for day-trip touring. View detail
Seat bag
Enough for a day or two's worth of luggage, Design and Size are just right. View detail
Available for yzf-r25
It could be used for yzf-r25.
I am planning an overnight touring trip and my normal Seat bag will not be able to handle it, so I purchased this product.
If I wanted to buy a large seat bag, it would cost about 10,000 yen, but I felt that I would not use it that often, so I put my Rucksack on the Tandem seat and hook the Belt to the Hook here to hold it in place.
Although a fixed belt must be purchased separately, it is cheaper than buying a large Seat bag!
It is also recommended for occasional overnight Touring with SS, as it is hardly noticeable!
View detail
Fits: HONDA ADV150, HONDA CBR250RR, KAWASAKI Z650, KTM 390DUKE, SUZUKI KATANA, YAMAHA MT-03, Others
Side bag with a shape that matches the car body
This side bag is shaped to fit the CB400T11 perfectly, and has a good matching as if it were an Exclusive Design.
The back body is Nylon, so I think it is classified as a soft case.
It is lightweight and easy to attach and remove via the Nylon band attachment to the Seat. I think the capacity is also large enough. I bought this for an overnight touring trip.
The bag is also equipped with a thin inner back like Eco Bags, so by putting things inside the inner back, the bag can be protected from water to some extent. Small items stored inside tend to be scattered, but this may be unavoidable with side bags, not limited to this product.
When opening and closing the fastener, whether due to insufficient rigidity of the fastener part or due to its shape, smooth opening and closing is sometimes not possible.
View detail
Trust Brand
Yamaha Bolt, purchased for securing luggage on Rear Carrier.
KIJIMABackRailQuantity:Pair (for Left and Right) This touring net is being used by hooking it up to the
Thanks to KIJIMA BackRail, Net does not interfere with Rear Fender.
I was concerned about the 100-unit Net, so I purchased a trustworthy BrandTANAX product.
I have just started using it and it holds my luggage firmly in place and looks like it will last a long time.
View detail
Great for OFF cars. Versatile.
About 3 candidates to install on WR250X
Off-road tank bag3:This seems to be a popular item often seen on off-road vehicle blogs.
However, all of my Touring mapples are R versions.
Map does not go in.
Size-wise, 4.5L is not enough.
I am not a big fan of the Map inlet/outlet spec. either.
RALLY50Tank Bag:This is an off-for-vehicle version of the multi-system tank bag we have been using.
Touring mappleR version will also be included.
Quantity:Pair (for Left and Right) and Pocket on the front side.
Variable capacity from 13L to 21L.
The shape and spec. are similar to multi-system tank bag,
It is expected to be as easy to use as it has been in the past.
LandCROSSTank Bag:Compatible with Touring mappleR version.
Quantity:Pair (for Left and Right) A pocket with a large overhang on the top (can hold a 500ml plastic bottle).
Movable Smartphone Case in the front pocket.
SizeCapacity:17L
In terms of shape, it is my favorite.
I was going to use a LandCROSSTank Bag, but after doing some research on it originally designed for BigOffLoader, it seems that it has a distinctive Quantity:Pair (for Left and Right) The RALLY50 Tank Bag was purchased because of the possibility of interference with the 250cc class when the handlebar is turned all the way down.
The back side is fixed by Belt.
When it is removed, the Buckle portion of the tip is inserted into the gap between the Seat and the Belt is attached with Magic tape.
The front side cannot be fixed by Magnet because it has been changed to IMSBig tank.
Therefore, we modified the excess belt from the TANAX bag we had been using in the past so that it could be fixed in place.
On the front side, four Suction Cups are attached, but they do not stick to the surface of the IMSBig tank because the resin molding itself is not smooth.
Once all four Suction Cups were removed, the Buckle was installed along with the Suction Cups.
(Cut the Belt of the Buckle part, drill a hole in the Belt part, and fix it together with the Suction Cup fixture.)
The front side can now be fixed to the belt without modifying the large size.
It is just the right size in terms of large.
When refueling, turn the front Buckle to Quantity:Pair (for Left and Right) Remove and cause the Tank Bag to move toward the front.
There is no hassle of securing it to the Carrier with Net for small purchases and such, just open the Bag and throw it in.
Since it is fixed at four points, it will not shift even with slightly heavy objects.
You can also change the size capacity, so you can buy souvenirs that you gave up on at your touring destination.
The only thing is that there are so many ZipTags that until you get used to using them, you won't know which one is which....
https://mystxl1200.com/archives/1454
View detail
buying a replacement
I used to use a Type that was fixed with Rubber, but it was difficult to use, so I had to replace it. It is a little too large for a day trip, but it is easy to use. If I may say so, I would like to have only one drink holder, and I would like to have a wider opening to take out the main pocket, and I have to remove the buckle of the SIDE strap every time I open the SIDE pocket, so Minus ★1. View detail
Fits: Others , YAMAHA SEROW250, YAMAHA TMAX500, YAMAHA RZ250R, TRIUMPH TRIDENT 660, YAMAHA MT-09, SUZUKI RF900, SUZUKI GSXS1000F, SUZUKI GSX-S750, SUZUKI GSX1100S KATANA, SUZUKI GSX-S1000, SUZUKI B-KING, SUZUKI GSX-R750, KAWASAKI zephyrχ, KAWASAKI NINJA 1000 (Z1000SX), KAWASAKI ninja250, KAWASAKI ZX-9R, KAWASAKI ZX-6R, KAWASAKI ZEPHYR400χ, KAWASAKI ZRX1200
Not too Large, not too Small
Since the capacity of a shell-type SeatBack is small, we searched for a SeatBackSingle Body that has a reasonable capacity without relying on a Side Back.
Since the tandem seats of modern motorcycles are fashionable, a large-sized touring back would be unstable while riding, so I think this size is just right.
Since this is a new SeatBack, the XBelt has been improved. In the previous model, the XBelt was fixed only with an X shape, but now there is a Belt for fixing the pedestal and an XBelt for fixing the Back. It is good to see progress and ingenuity.
The back itself is a stable Mr. Tanax, with Inner Frame and various Pockets, and is sophisticated and easy to use.
View detail