Reviews
Steady construction!
After all, the wind pressure is hard on the expressway, so if the windshield effect can be obtained even a little, RnineT Urban G / It is good to purchase Short Screen dedicated to S ,,,
My Urban has a Tachometer of OEMOption. With Tachometer it turned out that Bracket could not install due to interference.
Remove Tachometer for the time being (Standard Speedometer only) I installed Screen,
Wes Big's compatible model is correct but in the item description column "Can not be installed on Tachometer car of OEMOption" Please write down.
View detail
Fits: BMW RnineT, BMW RnineT, BMW RnineT Scrambler, BMW RnineT Racer, BMW RnineT Pure, BMW RnineT Urban G/S, BMW RnineT /5, BMW R12 nineT, BMW R12
It looks better, but it is somewhat unwieldy
Do you want ThrottleControl 's function for long hours of highway driving etc?
The so-called Plastic's Throttle assist is cheesy, and there is a feeling of disturbance even if it says anything.
Every time I detach it, I hear the scratches on the Grip, and there are opinions that I can turn it against the other, but it is still an obstacle.
For this product, you will get a satisfying feeling of Large in terms of high quality, appearance and texture.
However, because it was installed in 2018 MODEL, the gap with the ThrottleGrip end got about 5 mm free.
Also, since horizontally opposed two-cylinder Engine uses AxelOff and considerable engine braking will benefit, ingenuity is necessary for locking and releasing. I think that Multi-engine is quite handy.
View detail
Fits: BMW K1600GT, BMW K1600GT, BMW K1600GTL, BMW K1600GTL, BMW K1600GT, BMW K1600GTL
It will not collapse.
As my motorcycle was very heavy at midsummer hot days Asphalt was depressed with a good chance when using Side Stand. After attaching this Side Stand End, it does not collapse at all. However, because the getter is somewhat high, attention is required when the road is a road with a lowered Right and a road with a high Left. There is a danger that Motorcycle will collapse to Right Side. View detail
2018 MODEL is ...
Since the Bolt shape of Axle Shaft has changed, it is impossible to mount it as it is.
Because it was a waste, we dropped Parts with Left Side with Drill somewhat somewhat.
Strictly speaking, since the inner side was scraped, the strength may have dropped, but I think that it is enough to divide it only by reducing the influence of the first hit at the time of falling.
For 2018 MODEL, it is better not to purchase it for curiosity.
However, since aftermarket parts are many of Wunderlich, I was relieved to be able to install this part somehow.
View detail
Fits: BMW RnineT, BMW RnineT, BMW RnineT Pure, BMW RnineT Racer, BMW RnineT Scrambler, BMW RnineT Urban G/S, BMW RnineT /5
Screw interferes
Screw for fixing sticks to the outer edge of the intake entrance, so the exterior interferes and it feels like it can not be installed as the original.
I feel that it looks bad.
View detail
I am helping..
I tried various methods of CAGIVA 's V - Raptor' s loading, but I finally found it. (9 years from purchase of Motorcycle)
I was able to install it immediately.
View detail
Fits: BMW R1250RT, BMW R1250GS, BMW R1250GS Adventure, BMW R1200GS LC Liquid Cooling, BMW R1200GS LC Liquid Cooling, BMW R1200GS LC Adventure water-cooled
I wonder if it's too high
I installed it in the 13 year model R1200 GS.
The first thing I thought about opening it is scratches all over. is.
Quantity : 1 Set 17000 yen and never being cheap This quality is the worst. Is this overseas made like this?
Although I felt like I installed it, the accuracy was solid, but I do not know what is wrong at the time of designing, but the other side did not match one side.
Many people riding GS seem to feel Handlebar far, so I think that many people bought this product.
I think there are individual differences, I think if Quality would lower the price a bit more.
Those who buy from now are recommended to buy it by dividing it into overseas products.
Posture is much easier after installation.
View detail
Fits: BMW R1250RT, BMW R1250GS, BMW R1250GS Adventure, BMW R1200GS LC Liquid Cooling, BMW R1200GS LC Liquid Cooling, BMW R1200GS LC Adventure water-cooled
Easy chin
NORMAL is not suitable for Small Patterned Person I am comfortable with 165 Front's holding is different from ss by Front load It seems not to be in Motorcycle It seems not to be related so I wonder if I will be familiar with how to handle it View detail
Wind does not come directly to hands.
By attaching this Parts, the wind will not be applied directly to the hand, so the winter riding & high speed cruise will be comfortable. Since I chose Clear color, I am familiar with Motorcycle without breaking Styling. View detail
Fits: BMW R1250RS, BMW R1250R, BMW R1200RS LC water-cooled, BMW R1200R LC water-cooled
Is there a problem with Size?
I bought it to improve the Riding position of R1200R
It's a bit pricey, but it was with Exclusive Design
There is a sense that it can not be helped.
Although the texture of Parts is very good and not directly touchable part
The appearance is also wonderful.
However, in the fitting with the essential Handlebar
There is a gap of Large texture, is it really a vehicle type Exclusive Design?
I doubt it.. There is a gap of about 2 mm
This is Spec. Is it the street?
Sorry indeed!
I want to believe that there is no problem in practical use
View detail
Fits: BMW K1600B, BMW K1600B, BMW K1600GT, BMW K1600GT, BMW K1600GTL, BMW K1600GTL, BMW , BMW R1200GS Adventure, BMW R1200GS Adventure, BMW R1200GS Adventure, BMW C600 Sport, BMW C650GT, BMW F750GS, BMW F800GS Adventure, BMW F800R, BMW F800R, BMW F800R, BMW F850GS, BMW F850GS Adventure, BMW K1200GT
Necessity?
I bought it to change the front axle shaft,
It was not necessary at all. Crying
On the other side, to HexagonalNut of Axle division of Front LeftFork
If you have a matching Socket, you can exchange it without any turns.
On the other hand, if you do not have it, I think that it will be necessary, but in the amount of money?
It is much cheaper to buy Hexagon socket.
Although it may be good for those who need the accompanying Bit function, Bimmy
It is a product.
View detail
Fits: BMW RnineT, BMW R1250R, BMW R1250GS Adventure, BMW R1200R LC water-cooled, BMW R1200GS LC Liquid Cooling, BMW R1200GS LC Liquid Cooling, BMW R1250GS, BMW R1250RT, BMW R1200RT LC water-cooled, BMW R1250RS, BMW R1200RS LC water-cooled, BMW R1250RT
It is a reliable product to become credible Wonder Rich.
Hand guard installation situation is good, it is definitely a wind blow. It is made to not hit the Cowl neatly. I like the OEM Product and I like it, I will definetly like it! I like it. It is likely to be used for a long time. View detail
10 cm longer than NORMAL
In order to improve Sharp's StandardRear Fender, Parenthesis bad outer Fender,
I bought it. It will be about 10 cm longer. I do not know the effect, but outside Fender
I removed it..
Purchased from Rakuten Week by the convenience of hand-held Point
View detail
Quite effective
Installation is in German, but manuals are attached quite easily if you attach them in the order in the photos. I came running with mounting immediately, but there is quite a windproof effect. Since you can freely change the angle and height, you can position it according to your Motorcycle. View detail
Fits: BMW R1200R, BMW R1200GS, BMW R1200GS, BMW R1200GS Adventure, BMW R1200GS Adventure, BMW R1200ST, BMW F650GS, BMW R1200S, BMW R1200GS Adventure, BMW R1200R, BMW R1200GS, BMW K1200R Sport, BMW K1200S, BMW F800ST, BMW K1200R, BMW F800S, BMW F800GS
High
It was easier to use than I thought and I was touched a bit.
Cancellation with Norck.
However, if you look at the Material and making of the product, I feel that the price will be higher.
View detail
Running is easy
NORMAL Screen does not exist, etc. I bought it at Shisei. Thanks to this, the fastest, cruising speed has increased but there is a feeling that it looks a little bit. It is likely to be attached to the S1000R geometrically after F800R 's 2015 year? View detail
Fits: BMW R1200RT, BMW K1200GT, BMW G310R, BMW K1300GT, BMW G310GS
Difference between existence and nothing
When it comes to high-speed long distance, I want to release Right hands even if it's a bit better. That is possible. By turning the Blue part to Right, we push the Grip in the axial direction and stop it. In fact, you can turn with the Small finger so that the Right hand is shifted and sent, or you can turn it with the Left hand with Right one hand driving condition. You can cancel Cancellation as is or return to Left with the fingertip of Right hand. View detail
Tourer's comfort and maybe not even
Three months passed after wearing it.
I am doing a fast Touring several times, but the wind protection of the upper body is reasonable.
The wind hits only the upper part of the Helmet, even in high-speed driving for a long time
There is no discomfort.
Material is thick, there is no gravity by wind pressure.
However, because it is impossible to prevent the wind from flowing in from the gap with Headlight etc.
After all it is somewhat impossible for Tourer's comfort to be NAKED.
Therefore, it may be said that the upper body is almost windless, but the neighborhood of the stomach is
I can feel the wind pressure pretty much.
Those who purchase will think that you should pay attention to this part.
View detail
Fits: BMW R1250RS, BMW R1250R, BMW R1200R LC water-cooled, BMW R1200RS LC water-cooled
water - Mud bouncing effect on dirt!
Just fixing it with Tie Wrap and Double-sided Tape, it's easy!
It effectively prevents water splashing around Suspension, so it is really good.
I was worried that Rear suspension spring is white and stains are conspicuous, but it solved it.
It is regrettable that it was not possible to use with Helmet holder made by KIJIMA.
I can not install it unless I fairly cut Inner fender.
Because the attachment part of Fender becomes very thin, we removed helmet holder without any help.
Well, it's useless because it's between other companies' products outside FOR JAPAN MODEL.
View detail
Fits: BMW F650GS, BMW F800GS, BMW F800GS, BMW F800GS
It is comfortable ♪
'08 F650GS (800cc) Mounting on.
RALLY 790 was added to the OEMScreen almost from the time of new cars, but in search of further windproofness Up dating.
The real thing is a thin Smoke, packing up "Light smoke" With display.
Actually, Smoke which is thin enough to not be photographed, and expectation of ordinary Smoke is slightly disappointing presence and presence.
Two holes out of 6 holes fit a little, but attaching if attaching forced, but because it concerns Crack in long-term use, it machines a slightly long hole and it is OK. Since it passes through Rubber Bush, some gaps can be absorbed.
Also, since the upper side of the screen side and the lower side of the OEMKnuckle guard interfered with each other near the Left full lock, adjustment was made so as to shave a little by the sander and not interfere. Acrylic? It seems that the quality of the resin is good and because it is thick, there was no worry that Crack will enter.
When I tried running it, the windproof effect was the effect Large, as long as it was not strong wind, 80 km / H with NEOTEC 's Shield open..
Still the wind entered GunGun at the top of the Ventilation, so the adjustment of rectification was exquisite.
Wind pressure to the body, wind pressure with wide Zone per shoulder and chest (Coldness in winter as well) It will soften.
It is a feeling that transparency is also high, distortion which is particularly anxious can not be felt, even if it was attached at this earlier, it was good.
Screen itself shakes a little PullPull only with Idling, but if you run it, there is no blur and the rigidity is high.
Although it is not cheap, it is convincing if it is molded with the uniform transparency of this large area directly, and devised with a 3rd order surface to ensure rigidity without requiring Sub Frame.
It was in the picture of product introduction "GS" Logo is not in the real thing, seems not to be a sticker attachment. That's a pity.
View detail