Reviews
Less blurring.
[How is it used?
Mounted on GSX-S750
Was the one you received as per Image?
As per Image. Firm and solid.
It is lower, but the visible range is the same as OEM etc.
If I could adjust it well, I could see a wider area than the OEM,
I'm not very good at adjusting Mirror ….
Was the installation difficult?
Installation itself is simply a matter of turning the hexagon.
How was your experience with it?
OEMMirror was getting scared fast, so I replaced it and it is better.
However, this too starts chattering at about 120 km/h.
[Included Parts:were they on?
Screws necessary for installation are included.
Right is also Opposite Thread Screw.
[Was there anything that disappointed you?
When you are scared, you really feel like you can't see anything.
Other items that would be helpful
Installation Point or hang
Right makes Washer a Quantity:1 pc. with a masquerade
There is no longer any interference with the OEM's Brake master.
But I don't feel like I'm stopping with Snap.
important point
Quantity:Pair (for Left and Right) Quantity as the same:2pc. When I purchased the Set, it was Shape of Right & Left Differ number.
Screw lock agent required.
View detail
Fits: Others
Power supply for PanasonicGORILLA
I don't mean to brag, but Motorcycle is Polishing Specialty The length of the Chain cannot be adjusted in
The installation work was done by a Motorcycle shop that we are familiar with.
The installation fee Gold is included in the X-ADV used car delivery and maintenance fee Gold, so the details are unknown.
The USB port is designed to be waterproof, but the plug port is facing down to prevent rain.
I have only used it once, but I have a feeling that Large will be very active in the future.
The cell phone Navigation is inconvenient for some reasons, such as signal loss in mountainous areas. We do not use it because of the high communication charges.
I use a PanasonicGORILLA which I also use with my own car. (VWGolf's Navigation has little information and does not show Costco. (VWGolf's Navigation is not very informative and does not show Costco, and the other information is also very poor.)
View detail
![[Replacement/Optional Parts] USB Power Supply Repair (for 99502/93039 etc.) Cap](https://img.webike-cdn.net/catalogue/images/83647/19226_TS.jpg)
Waterproof parts should be provided by Spare.
I would like to thank you for selling this kind of small parts.
Waterproof performance degrades over time as a matter of course; if it's in Catalogue, you should buy it.
The evaluation includes imagination and expectation because the replacement work has not been done.
Of course, there is no Instruction Manual.
View detail
Fits: YAMAHA YZF-R25, YAMAHA YZF-R3, YAMAHA MT-03, YAMAHA MT-25
It is easy to install.
The product is fine, but it can only be installed on the Left Side, and the position is a bit low. View detail
I am satisfied with the quality function design!
I am very satisfied with the quality and functional design of the product, which also cancels out the vibration from the handlebar and ensures good rearward visibility! View detail
Fits: HONDA CB1100, HONDA CB1100 RS, HONDA CB1300SB, HONDA CB1300SF, HONDA CB1300SUPER FOUR SP, HONDA CB1300SUPER BOLD'OR SP
General Slider
The car was delivered with DAYTONA's Engine Guard installed.
Because I scraped it just by driving normally on a mountain road,
Changed to Slider.
I am concerned about Damage to the Motorcycle in the event of a fall.
View detail
Fits: KAWASAKI Ninja1000, KAWASAKI Z900, KAWASAKI Z800, KAWASAKI Ninja1000SX, KAWASAKI Ninja ZX-6R, KAWASAKI Ninja650, KAWASAKI Ninja400, KAWASAKI Ninja250, KAWASAKI Ninja ZX-25R
It's easy.
Seal for easy installation!
The light blue reflection alone has a custom feel!
I loved it.
View detail
SM LINEFender MD44 installed
As per the impressions of our predecessors, the MD38/44 can be installed without any body modification.
Reasonable price and VisualUp, no complaints!
However, in my case, I have prepared the following additional components
Spacer:6.2mm ID x 15mm OD x 6mm L (qty:4)
Bolt:M6 x 30 (qty:2)
Flat Washer:M6 x 22 (qty:4)
When MD38/44 is installed, the spacer thickness should be at least 6mm to avoid interference with the car body. The outer shape may be a little larger than 15mm.
It is fastened with 4 OEMBolt, but for some reason, Quantity:I also bought Bolt because each 2pc is a different length (my used one) and when I put Space on, the shorter one doesn't reach.
When tightening from the tire side, the bolt groove on the FenderBody is large, so the washer is also large. 22mm larger than the bolt groove will cause the washer to ride up.
For your information.
View detail
Swing Arm scale is for reference only
As the title says, the scale on the Swing Arm is for reference only.
I was looking at Motorcycle from behind and noticed that the teeth of Sprocket were somehow closer to the body side of Chain.
Quantity in the Swing Arm scale:Pair (for Left and Right) The position of Chain and Sprocket is not good, even though they are in the same position.
The Chain Alignment Tool was used to straighten the Chain, and the alignment between the Chain and the Sprocket was perfectly aligned, and as a byproduct, the Swing Arm scale was set to "Quantity:Pair (for Left and Right) We found that there was a Gap of about 2-3mm in the
If the alignment of the Chain is not correct, it can cause uneven wear of the Tire and damage to the Sprocket and Chain.
This is a Tool of Recommendation for those who are interested in getting ChainAlignment right!
View detail
Easy to install, easy to use, but ….
It is easy to install and easy to use, but it looks tacky when the Bag is not attached. Also, the gap between the bag and the car body is wide, so it looks tacky from the back.
Also, the price of the separate installation kit for the OEMRear carrier is too high.
View detail
Fits: KAWASAKI ELIMINATOR SE, KAWASAKI ELIMINATOR
expensive
Was the one you received as per Image?
Yes
Was the installation difficult?
Easy
How was your experience with it?
Nothing to use, just Screw.
[Was there anything that disappointed you?
price
View detail
We use it for our cars
I use it in my high ace Regis car. 12v is the same as motorcycle, so there is no problem. Minus terminal is an appropriate bolt that can be used for earth measurement. The Minus terminal is a suitable bolt that can be used for earth.
I use it on my iPhone12mini and it charges by turning the key on and also by Idling, it does not charge when the Cell is turned on but it will come back on soon. The charge increases even when using the iPhone as Navigation, watching Youtube, or using Bluetooth to connect to other devices. Naturally, it charges faster when the screen is dark or when the app is not in use.
I am using this Charger in my motorcycle BALIUS2, but I can't charge the battery near Idling due to lack of power.
The problem is that the phone becomes loud and unusable when exposed to warm air from a heater or when not exposed to cool air from an air-conditioner under the blazing sun in mid-summer, instead of charging. Also, the location of the charging pad on the phone has a significant impact on the performance of the device. The purchaser should find out where the charging pad can charge the phone the fastest.
View detail
DAYTONA Re-Helmet
I bought this for use after touring. I used to use a Plasma Raster, but the airflow is so much stronger than the Plasma Raster, so I am expecting a Large for use after touring in the middle of summer. View detail
Used for SHOEIEX-ZERO
This size is ideal for helmets that do not have speaker holes like EX-ZERO and have no space in the mounting position.
I have used the standard Speaker and the thin Speaker, but the Smallest is the thinnest and the sound quality is the same as the others.
The price is a bit high, so IncomeQuantity:It would be appreciated if the Speaker of the Set could also be selected.
View detail
Helmet lock and Quantity:Set so very SMART!
After purchasing DAX125, I wanted to do something about the luggage space and helmet lock, so I installed DAYTONA's side bag support. If I use a larger bag, the Helmet lock will not work without a wire or something. View detail
Fits: SUZUKI ST250, SUZUKI ST250E, SUZUKI INTRUDER250, SUZUKI GRASS TRACKER, SUZUKI GRASS TRACKER BIGBOY, SUZUKI VOLTY
This is my second purchase.
Quantity:It's convenient because it's in a set! It's a great help because it's a hassle to look for a product by looking at the part number!
I buy it with Repeat.
View detail
a little expensive
10mm on brembo OEMHose, works well.
I like the fact that there are many Size options.
It is more expensive, but Individual Youth offers Quantity:2pc. Set is enough, so Quantity is wasted.:Better than paying high Gold amount for 1 Set of 10pcs.etc.
However, I think there are cases of multiple Wiring, so 4 to Quantity:Variation of 1 Set of 6pcs. is also desired.
View detail
Fits: HONDA Rebel1100, HONDA Rebel500, HONDA Rebel250
Easy to use
I purchased the Round Type because my ST250 has a circular swing arm. I am satisfied with it and can use it without any problem. View detail
Replacement from OEM Product
I replaced the OEMCap that was too assertive for my Black vehicle with this one. It is not a compatible car model, but … I was able to install it without any problems.
I haven't driven the car since it was installed, but I'm happy to say that it looks exactly how I expected it to look with the uniformity of the Black color.
View detail
Fits: Others
For Touring
I don't know how difficult it is because it was installed at the shop when I took delivery of my car.
This is also an OEM Product, but this one is slimmer and looks better, so we installed it.
The appearance of the product looks and feels better than the OEM product.
View detail