Reviews
It's bright
Installation and wiring is easy. The fogs are bright and satisfactory. However, if the Controller is not fixed to a Motorcycle with a large size, the Connector is poorly fixed with Rubber, so it is easy to pull out when pulling the Wiring. You can't notice it at all from the outside. I put the Controller inside the DummyDuct cover, but during the Motorcycle inspection, the Cover seemed to be hard to put on, so the mechanic pulled the Controller's Wiring, and after a while, I noticed that the fog light did not turn on, After a while, I noticed that the fogs didn't come on, and I had a large amount of trouble finding out the cause. View detail
Fits: HONDA CBR650R, HONDA CBR650F, HONDA CB650F, HONDA CB1100RS, HONDA CB1100EY, HONDA CB1000R, HONDA AFRICATWIN, HONDA CRF1000L, HONDA X-ADV, HONDA SUPER FOUR, HONDA SUPER BOL D'OR, HONDA NC750X, HONDA INTEGRA, HONDA CBR650R, HONDA CBR650F, HONDA CB650F, HONDA CB1100RS, HONDA CB1100EY, HONDA CB1000R, HONDA AFRICATWIN
It's expensive, but if design is important to you, this is the one to choose.
I saw someone wearing this USBCharger at a Rebel Meeting and thought it looked great, so I decided to install it myself.
To be honest, I think the price is high. Even if you buy it for its appearance, the Cable is exposed while charging and looks nothing, so now I think a SlimUSBCharger from DAYTONA or a USB Cable of Attachment power direct connection type would have been more beautiful.
Also, as for waterproof, it is a simple Cover Only, and unlike Daytona's USBCharger, the USB connector is not located that far back, so I was very worried about using it in the rain. (There was no breakdown...)
If you are a person who is absolutely concerned about the appearance, even when displaying and placing, this is a good choice. I think this is the one for you. If you are a long touringMain user like me and always have your phone connected while traveling, I think the USB Cable that supports direct power connection is better.
View detail
Fits: HONDA CBR300R, HONDA CB500X, HONDA CB125R, HONDA CB300R, HONDA CB500F, HONDA CBR500R, HONDA MSX, YAMAHA NMAX155, HONDA CB150R, YAMAHA X-MAX, YAMAHA N-MAX, YAMAHA BW'S, HONDA PCX, KAWASAKI NINJA250, SUZUKI BURGMAN 125, SUZUKI BURGMAN 200, HONDA CBR300R, HONDA CB500X, HONDA CB125R, HONDA CB300R
It's a bit pricey, but it has a large charging output, is stylish, and is highly satisfying.
I installed it on my CB125R.
Originally, I was going to use DAYTONA's USB-CMotorcycle power supply, but I couldn't charge it well because of bad compatibility.
On the other hand, this product can be charged without any problem, and the output is also Large threshold, so even if I run with the car navigation system app on at the brightest Large of the screen, it will be charged properly.
I installed the power supply from the Harness under the seat. The cord length of the product is also just right with a good amount of room from under the seat to the Handlebar.
If you want to install it by yourself, it is not so difficult, though it is necessary to use Bullet Type Terminal etc. because the tip of the cord is not processed.
Due to the nature of the product, it is best to refrain from using it in the rain.
View detail
It looks good, we just need to improve the accuracy of the parts!
I think it looks good, but the industrial accuracy of Level is disappointing. The screw hole was also visible from the outside, and when I tightened the screw, the carbon on the top seemed to crack, so I put Sponge on it to make it tighter. The screw hole was also visible from the outside. It's a shame because it looks good. View detail
Hobby Rides HobbiesItems
The R1250RS does have a Heller Socket power supply under the Seat.
I end up using it in Heat Up Vest in the winter and
From the bottom of the Seat to the Handlebar Mounting phone in the first place.
It was too uncool to pull Cable, so
I bought this product to put on top of my Brake fluidTank.
I can charge it well and have no particular complaints, but
Since the lid is shared by USB2 Port.
If you're running on a rainy day, there's no doubt that water will get into your
I'd better be careful.
I had mine installed by Dealer.
It cost me another 20,000 yen for Relay and installation labor.
It's a good thing I like it, though! (Large sightlines)
View detail
Hmm
I bought it because of the design. The design is very attractive. I tried to cut it with a sandpaper, but it doesn't fit. The accuracy of processing is not so good. The screw hole is also out of alignment and I can see the screw from the outside. (^^) View detail
STAND must be processed.
When you tighten the bolt, it will crack.
This is a product that requires Carbon Plate sharpening. Please be careful.
View detail
Fits: YAMAHA MT-09 To Racer, BMW C600, BMW C650 GT, SUZUKI GSX1300R HAYABUSA, YAMAHA T-MAX, YAMAHA MT-07, YAMAHA MT-09
Overall Large Satisfaction
I'm not sure if it's anodized or not, but I've been using it for a little over two years now and it's faded and peeling. None.
I use it to charge my phone while driving, and it charges more than my Charger at home. It's early.
Pricey, but worth the price.
View detail
Fits: HONDA glom, YAMAHA BWS, KAWASAKI NINJA250R, HONDA SmallReserve tankSize, HONDA PCX
It was good to purchase ^ ^
I searched for USB power supply for charging mobile phone I found a stylish feeling item I tried purchasing thinking that I will also refresh around Handlebar.
Parenthesis was good if I added Red color (^_-)
View detail
Excellent
This is very easy to install that need about 10 min and also this is stable than before. I give this 5 star. Hightly recommend. View detail
I am satisfied as the presence gets up at night.
This time, I left it for a car inspection, but it seems that it will not pass in the state where only this item is caught and wired. As a result, due to the generation of expensive wages, it is troublesome at the time of vehicle inspection, but it seems better to pull out Wiring.
Others are not written in the Instruction Manual, but those who punctured about two places to make the Guard pass through Wiring seem to be refreshing.
Appeal is effective for oncoming vehicles, etc.
View detail
Fits: HONDA one part, YAMAHA Yamaha Vehicles, HONDA LargeReserve tankSize, HONDA BOLDOR, HONDA SUPER FOUR, HONDA Africa Twin
Although the price is a little expensive, I do not need to find a place to install newly and I use it conveniently.
Used at CB 1300 SUPER BOLDOR.
Installation, look, feeling of use and
Basically I am satisfied..
Especially
There is a sense of SMART after installation.
Performance is unchanged from other companies' products.
View detail
Designability is better than functionality!
Among many Radiator guards made of perfective mesh boards, this product is excellent in design property and satisfied with texture is high
is.
To install it Side cover Quantity : Pair (for Left and Right) It is necessary to remove it.. It is easy if you put Bolt tightly
However, it fought quite a hard time (Instruction Manual is not attached, so after confirming with official HP and installing it
I think it is good, but this is also unkind and difficult).
Once installed it is a word of Cool. Because the strength is as it is, things are bumping
I think that there is no problem.
It is 3 to 5 thousand yen higher than other products, but I am extremely satisfied. And the temperature in the summer is worrisome.
View detail
Overall
It installed in TRACER.
Although installation, Screw's precision or Material is one more, and it is retightened with Hexagonal Wrench
Then the Screw's mouth will collapse and the tool will not come out.
Screw lock agent is included but it is included, so there is no need to purchase separately.
It can be installed with Hexagonal Wrench 1 pc.
Other than that it is generally satisfactory, and Coloring is also not noticeable.
After installation, the feeling of grounding improves considerably.
TRACE tends to be heavy on top, but because it is Side Stand with that few ground contacts
I feel more comfortable.
Although it is good as a whole, this evaluation was made on the quality and price of Screw.
View detail