Reviews
Fits: YAMAHA MAJESTY250 SV, YAMAHA MAJESTY250(SG03J), YAMAHA MAJESTY250(4HC), YAMAHA MAXAM, YAMAHA GRAND MAJESTY400, SUZUKI GSX250FX, YAMAHA GRAND MAJESTY250, KAWASAKI BALIUS2, KAWASAKI BALIUS, KAWASAKI ZEPHYRX, KAWASAKI ZEPHYR750, KAWASAKI ZEPHYR750 RS, KAWASAKI ZEPHYR400, KAWASAKI ZEPHYR1100 RS, KAWASAKI ZEPHYR1100, HONDA FORZA(MF06), HONDA SILVER WING600, HONDA PS250, HONDA SILVER WING400
It purchased in order to reduce the fatigue at the time of entrainment. In the handle position of normal, since the waist became painful when it had ridden for a long time, it equipped with the SEBBAKKU holder. Although 27 mm of attached comment w
It purchased in order to reduce the fatigue at the time of entrainment.
In the handle position of normal, since the waist became painful when it had ridden for a long time, it equipped with the SEBBAKKU holder.
Although 27 mm of attached comment were raised and were backed 17 mm, even if the posture of the upper half of the body became easy beyond the numerical value and they had ridden for a long time, the waist became that they have a pain in less.
It was satisfied with the effect which exceeds anticipation.
Attachment was also able to be simplified freely, without also needing a cable extension difficultly.
View detail
It exchanged from the normal blinker ^^ Although it is the brett blinker currently used to American one etc. mostly [ it is good and ], the mini-blinker and size of this which the size down was carried out and often exist do not change. Since it is pa
It exchanged from the normal blinker ^^ Although it is the brett blinker currently used to American one etc. mostly [ it is good and ], the mini-blinker and size of this which the size down was carried out and often exist do not change.
Since it is parts which exclusive stay, the coupler cord classified by vehicle type, etc. are attached, and can carry out bolt on simply, it is a recommend.
A chromeplating also has a high grade feeling considerably and is five star in that of cool ^^
View detail
Fits: Others , HONDA MONKEY, HONDA MONKEY, HONDA APE 50, HONDA APE 50, HONDA APE 100
It attached to APE50. If it is searching with whether there is nothing any since money is applied although he would like to use a separate handle ... This product was found. It is cool in a separate handle a first glance!! The width of a handle al
It attached to APE50.
If it is searching with whether there is nothing any since money is applied although he would like to use a separate handle ... This product was found.
It is cool in a separate handle a first glance!! The width of a handle also becomes narrow and it SUISUI-run-came to be easy of between Kuruma.
View detail
Fits: HONDA CB1300SUPER BOLDOR, HONDA CB1300SUPER BOLDOR, HONDA CB400SS, HONDA CB400SF, HONDA CB750, HONDA FTR223, HONDA FTR223, HONDA NC700S, HONDA VTR250, HONDA APE 100, HONDA APE 50, HONDA APE 50, HONDA HORNET250, HONDA MONKEY, HONDA MONKEY, KAWASAKI 250TR, KAWASAKI W400, KAWASAKI W800, KAWASAKI ZRX1100, KAWASAKI ZRX1100II
It was used by GS50. If it compares that it is pure, I will feel that it became inclined attitudes for a while. He has what [ no ] is said since appearance also became good individually and physical feeling speed also increased. The time and e
It was used by GS50.
If it compares that it is pure, I will feel that it became inclined attitudes for a while.
He has what [ no ] is said since appearance also became good individually and physical feeling speed also increased.
The time and effort which makes a hole was considered and it was made four stars.
View detail
Since a pure twist is also made into its favorite position, this separate handle is used. Although the end cap is made into plastic specification, it is easy to fall as a problem. It will become difficult to fall if a vinyl tape is also rolled and
Since a pure twist is also made into its favorite position, this separate handle is used.
Although the end cap is made into plastic specification, it is easy to fall as a problem.
It will become difficult to fall if a vinyl tape is also rolled and attached.
Since it is not too bad, it is a three stars.
View detail
Fits: HONDA STEED400, HONDA STEED400 VSE, YAMAHA DRAGSTAR250, SUZUKI BOULEVARDC50(Intruder Classic800/C800)(VL800), SUZUKI Intruder Classic400, KAWASAKI VULCAN800, KAWASAKI VULCAN400II, KAWASAKI VULCAN400, KAWASAKI ELIMINATOR 250V, HONDA MAGNA(V-TWIN MAGNA), HONDA STEED600, HONDA STEED600, HONDA STEED400, HONDA STEED400, HONDA Shadow slasher750, HONDA Shadow slasher400, HONDA SHADOW400, YAMAHA DRAGSTAR400 CLASSIC, YAMAHA DRAGSTAR400, YAMAHA DRAGSTAR1100Classic
It purchased and has equipped in December last year. It was, while the smell to which a plastic will burn in January, this year ran, although a reason was not understood, either but was left as it was, it was a new bulb, but the direction of the down
It purchased and has equipped in December last year.
It was, while the smell to which a plastic will burn in January, this year ran, although a reason was not understood, either but was left as it was, it was a new bulb, but the direction of the down went out.
In order to check, when Wright was opened, a coupler and wiring burned and melted and it was in the charred state.
the manufacturer was asked and insides were exchanged -- it was given.
However, it will enter in September and will be in the same condition.
The coupler was in such a severe state by the half this time that it melts and collapses.
Wright's design itself -- it will be useless.
Wright had better not choose only by a design.
View detail
As the blinker of the shadow was a mandarin orange, it was purchased in order to change an image this time, since it is not felt not much refreshed. It exchanged and was a correct answer. Former and an image change, and it is felt refreshed and is
As the blinker of the shadow was a mandarin orange, it was purchased in order to change an image this time, since it is not felt not much refreshed.
It exchanged and was a correct answer.
Former and an image change, and it is felt refreshed and is popular also from the surroundings.
View detail
In consideration of the bulb gone, it purchased to the stock. Although he noticed after purchase, since I was a clear lens, I was an orange bulb. Since it is unavoidable, it is under examination whether it is used as it is, or it is used for an or
In consideration of the bulb gone, it purchased to the stock.
Although he noticed after purchase, since I was a clear lens, I was an orange bulb.
Since it is unavoidable, it is under examination whether it is used as it is, or it is used for an orange, coloring thinly.
The direction to purchase needs to be warned not only about wattage but about this point.
Foundations Orange lens => Clear bulb Clear lens => Orange bulb Peevish!!
View detail
Since it is cheap and is a duracon system, it purchases for racers for the reason for being strong to a fall. Since the inside diameter was phi 14, when attaching to the handlebar of the inner side phi 16, it inserted in, after making the inside diame
Since it is cheap and is a duracon system, it purchases for racers for the reason for being strong to a fall.
Since the inside diameter was phi 14, when attaching to the handlebar of the inner side phi 16, it inserted in, after making the inside diameter thicker by sealant.
It fitted in very well perfectly.
It seems that it does not separate in the case of a fall, either, since it is smallish.
expect -- and probably, it can use and the good admiration is strong.
View detail
Fits: YAMAHA DRAGSTAR400 CLASSIC, YAMAHA DRAGSTAR1100, YAMAHA DRAGSTAR400, YAMAHA DRAGSTAR250
Since a pure shift was not pleasing, this product was purchased. Attachment is also very easy and appearance is also individually satisfied with pure one which is said farther of attachment. However, when raising a shift, since it was a rubber if
Since a pure shift was not pleasing, this product was purchased.
Attachment is also very easy and appearance is also individually satisfied with pure one which is said farther of attachment.
However, when raising a shift, since it was a rubber if pure, it did not think it is hard and painful, but since this product is not a rubber, it may feel hardness and painfulness a little.
View detail
Fits: SUZUKI GSX-R1000, SUZUKI GSX-R1000, SUZUKI GSR400, SUZUKI GSR400, SUZUKI GSR250, HONDA NSR250R, SUZUKI GSX1400, SUZUKI SV1000S, HONDA 400X, HONDA CB1000 SF (Big One), HONDA CB1100, HONDA CB1100 EX, HONDA CB1100 RS, HONDA CB1300 SF, HONDA CB1300SUPER BOLDOR, HONDA CB250F, HONDA CB400FOUR (water-cooled), HONDA CB400SS, HONDA CB400SF, HONDA CB400SF
SUZUKI GSX1400 was equipped. Direction of a return spring was puzzled just for a moment at the time of wearing. Since the volume of a spring is reverse in the right, the left, or either being pure, it does not go into the hole holding the end of a
SUZUKI GSX1400 was equipped.
Direction of a return spring was puzzled just for a moment at the time of wearing.
Since the volume of a spring is reverse in the right, the left, or either being pure, it does not go into the hole holding the end of a spring well.
However, even if it does not enter, since maintenance is possible, it is satisfactory at all on actual use.
Attachment was completed in about 10 minutes.
Although the step of silver was attached, it is glossy and appearance is racy perfectly.
If it actually rides, a notch grips in shoes, and does not slide even on a rainy day, but is comfortable.
With the thing without a bank sensor, since the angle of bank slit upwards aslant, it became deeper than normal.
Instead, since the overall length of a step is slightly short, the shoes point grounds with THE.
It is large satisfaction synthetically.
However, it is an one star minus regarding direction of a spring.
View detail
This stay was purchased with a 50-cm sissy bar. However, when inserting Bar in stay, although it did not understand whether it was a design mistake in the mistake of the manufacturing process, it could not insert in the smooth but suffered troubles.
This stay was purchased with a 50-cm sissy bar.
However, when inserting Bar in stay, although it did not understand whether it was a design mistake in the mistake of the manufacturing process, it could not insert in the smooth but suffered troubles.
Furthermore, I was sorry for weld to already have rust a little.
However, since appearance is quite satisfactory, it is three stars.
View detail
Having equipped with the blinker kit of a four-piece set, it falls. One blinker is damaged. rebuying a four-piece set piled -- if you think what it would be absent and would do, there is setting out of only a blinker -- peace of mind. Kana whi
Having equipped with the blinker kit of a four-piece set, it falls.
One blinker is damaged.
rebuying a four-piece set piled -- if you think what it would be absent and would do, there is setting out of only a blinker -- peace of mind.
Kana which can be used when (?) fall is carried out next time although it is excessive one piece since it is a two-piece set.
View detail
Fits: HONDA CB400SF, HONDA CB400SF, HONDA CB400SF, HONDA CB400SF, SUZUKI INAZUMA400, HONDA CB400SUPER BOLDOR, HONDA CB400SUPER BOLDOR, HONDA CB400SUPER BOLDOR, HONDA CB400SUPER BOLDOR, HONDA CB400SF, HONDA CB400SF, SUZUKI INAZUMA1200(GSX1200FS)
It attached to HONDA CB400SB'09. Although it was in description of item even with '08, it has equipped satisfactorily. OK is glad for cables to come out as it is. Although attachment was easy, 10 mm of 6 angle wrench is required for it. Wh
It attached to HONDA CB400SB'09.
Although it was in description of item even with '08, it has equipped satisfactorily.
OK is glad for cables to come out as it is.
Although attachment was easy, 10 mm of 6 angle wrench is required for it.
When it straddles instantly and a handle is grabbed, it is very much good touch.
If normal, there was trunk touch that the waist became painful for a while for anteversion, and power was tired of going into an arm, but the position after wearing became very easy.
When it is this, long-distance touring is also OK!! Going out is pleasure.
View detail
If it attaches in the location which raises a handle with all its might, when a full lock is surely carried out, a hand will be caught between a handle and a tank. However, it will be set to the hardly worried level if it attaches to the location lowe
If it attaches in the location which raises a handle with all its might, when a full lock is surely carried out, a hand will be caught between a handle and a tank.
However, it will be set to the hardly worried level if it attaches to the location lowered for a while.
It became quite easy when compared with the normal handle also in the state.
Also when running a peak, do I feel that it becomes easy to run compared with normal?
I think that this hit is based on how to ride (^_^; I hear that attachment requires a hang just for a moment, and they are four stars.
View detail
It attached and was overly easy. When it compared that it was pure, it became the touch felt refreshed and became smart (^-^) As itself, it is satisfactory. Certainly [ since it rusted when it let it alone, way it made maintenance brisk ]!
It attached and was overly easy.
When it compared that it was pure, it became the touch felt refreshed and became smart (^-^) As itself, it is satisfactory.
Certainly [ since it rusted when it let it alone, way it made maintenance brisk ]!
View detail
Fits: HONDA CB400SF, HONDA CB400SUPER BOLDOR
When it was a handle of normal, a wrist and the waist became painful easily, and since he wanted to have sat down further calmly and to ride, it purchased. As for the result, inclined attitudes returned and most burdens on a wrist and the waist were l
When it was a handle of normal, a wrist and the waist became painful easily, and since he wanted to have sat down further calmly and to ride, it purchased.
As for the result, inclined attitudes returned and most burdens on a wrist and the waist were lost.
Furthermore, since a brake hose calls it a mesh, admiration also comes out custom, and if a brace bar is attached according to the color of a motorcycle, I will think that he is still smarter.
Incidentally ... w which was the sure almost same position when it ranked with a police motorcycle by the waiting for a signal
View detail
Fits: HONDA CB400SUPER BOLDOR, HONDA CB400SF, HONDA CB400SF, HONDA HORNET600, HONDA HORNET250, HONDA ZOOMERX, HONDA JADE, HONDA glom, HONDA glom, HONDA X4, HONDA X4, HONDA X11, HONDA VTR250, HONDA VTR1000FVTR1000F FIRESTORM, HONDA VTR TypeLD, HONDA VFR800, HONDA NSR250R, HONDA NSR250R, HONDA NSR250R, HONDA GB250 CLUBMAN
It attached to CB1300SF. Appearance changed gaily. The crevice between a handlebar and a stainless nut was almost lost. When attaching stay, such as navigation, to a handlebar, I consider that it is better to take care.
It attached to CB1300SF.
Appearance changed gaily.
The crevice between a handlebar and a stainless nut was almost lost.
When attaching stay, such as navigation, to a handlebar, I consider that it is better to take care.
View detail
Fits: SUZUKI VOLTY, SUZUKI GSX750 KATANA, SUZUKI GSX750E, SUZUKI GSX250S KATANA, HONDA FT500, HONDA FT400
It is used for GSX250S katana. It becomes the exchange from an authentic positive one. Appearance became good. Since the handle brace is not attached, numbness comes to a hand. Since an angle etc. are changed, it can arrange to oneself lik
It is used for GSX250S katana.
It becomes the exchange from an authentic positive one.
Appearance became good.
Since the handle brace is not attached, numbness comes to a hand.
Since an angle etc. are changed, it can arrange to oneself liking.
View detail
Attachment is very easy. Since it hardly rides back, the comment at the time of a tandem is not made, but since it becomes a support and also becomes a hook when a feeling of an appearance volume carries increase and a load, it attaches, and I think t
Attachment is very easy.
Since it hardly rides back, the comment at the time of a tandem is not made, but since it becomes a support and also becomes a hook when a feeling of an appearance volume carries increase and a load, it attaches, and I think that it was good.
Since it became [ of a sheet ] difficult to be locked after attachment, evaluation 4 was used.
View detail