Reviews
GSX1300R HAYABUSA is Large strong even if it hangs?
I thought I would use a single pipe to replace the stem bearing on my GSX1300R Hayabusa, but I thought it would be too much work to assemble and disassemble, so I bought this product.
The maximum load capacity is 180kg, so is the GSX1300R HAYABUSA, which weighs almost 270kg, large and strong? I thought that I could go because I only hang the front. (Please do so at your own risk.)
Some people use a Ratchet Tie downBelt to hang it, but when you take it down, it falls all at once, so I recommend a lightweight Lever whist.
View detail
sturdy
I bought this one because the one I bought before was too thick to fit and the one I bought after that bent at the end after one shot.
This one was not too thick to fit and the tip was sturdy, so I was satisfied with the Large variant. The price is not too high, so I recommend it.
View detail
unit stemup stand
"It was shipped by sea, but it was delivered really quickly. I am satisfied with the product for the price. It is good. The painting and welding are well finished. I think it would be better to wrap the bolts or nuts one more time. Will be shipped ----------------------------------------------- ----------- Doeeotguyo maritime shipping, but really fast delivery. Price satisfied contrast products. good. It is such good coating and weld finish. Bolt or nut I think I better give Gamla once more. Package delivery jeongman durable and safe delivery are glad to put a lot of airbags? Powered by Google Translator" View detail
Unit Steering Stem Wrench
I used it to check the Torque when I replaced the Stem bearing.
The Torque wrench is used to set the Torque value, so you can go Large without any experience.
It's also a good way to see how much force you need to tighten.
It's not easy to make pre-Road adjustments.
However, you have to reduce the Torque value to account for the length of this tool. (It's a pain in the ass, so I used a slightly reduced value)
View detail
Motocrosser's Engine overhaul
Used in Engine overhaul of KX450.
The shaft diameter is different, so a little wobble is unavoidable.
When I tightened the bolt to fix the shaft, the nut welded to the shaft was removed.
I wish you had booked it instead of tending it.
View detail
Unable to purchase with Bar code search
I tried to buy it using the Bar code search, but the search results showed The sale is now closed. I thought the Bar code had been changed, but when the product arrived, the Bar code was the same and the search results were still The sale is over. It was.
The product will be evaluated after use.
View detail
To prevent falling over
One windy day, the motorcycle with the cover was tipped over by itself, and there were scratches on the exhaust system, mirror and bar end.
I bought it to prevent such a tragedy from happening again.
If you put this on and put it in the low GEAR, it will hardly move, so it can withstand up to 20m strong winds (although I haven't experienced a direct typhoon hit).
Of course, if you extend the rear wheel by one step, the rear wheel will float, so chain maintenance is now easier.
View detail
I will not buy anymore
After replacing the Spring twice, the Screw mountain was crushed. View detail
SmallEngine Displacement VolumeEngine maintenance is a large activity.
SmallEngine Displacement VolumeI have several cars, and I didn't want to waste money buying a special engine hanger for each car model, so I bought this product. It is very convenient. View detail
Satisfied
I like the design and bought it. I painted the color White. No strength problem. I did not want to scratch the wall, so I fixed it with Pin. It seems to be no problem. View detail
easy to use
I installed it on the wall of the entrance. I think it's easy to use. The color is only Black, because it doesn't match the wallpaper. "Glossy White. I painted it DIY with a White type setting. View detail
Also recommended for Helmet's Display!
I recommend this to anyone who wants to display or store their helmet on the wall. I used 4 of these to hang my helmet on the wall like a showroom. View detail
For Large cut Stem
This is the part where you want to use the Torque wrench properly.
I bought it.
I'll have to do the math to set up the tightening Torque.
It's very nice to be able to tighten it without worry!
If you are worried about tightening without Torque wrench, please buy it!
Recommendation. If you buy it once, you can probably use it forever.
View detail
I'm worried about the wound.
I thought the U-Hook was better than the L-Shaped Bracket and bought it.
The U-shape is more secure and easier to fit.
With the L-shape, you have to make the motorcycle somewhat horizontal to hang it.
I'm concerned about the BALI at the end because Bracket just pulled it out with PRESS.
I didn't want to damage my motorcycle with the Bracket, so I wrapped Vinyl Tape around it.
I want you to wear at least Cushion rubber. I wish you could wear Cushion rubber.
View detail
I'm going to do some work around Stem.
It is essential for maintenance around Stem.
The service manual states You'll use all the springs, you'll pull the torques, you'll get rid of the torques. but it was too much trouble.
With this Socket, you can use ordinary torque wrenches and it is very easy to use Large.
The adjustment of the Stem Nut has a strange craftsmanship aspect to it, and it's not easy to get it right if done by an amateur, but I was able to maintain it to my satisfaction with this one.
View detail
Exactly for motorcycles that don't have a Center Stand!
ChainMaintenance on a motorcycle without a Center Stand is quite a hassle, but this product makes chain maintenance much easier! I wish I had purchased this sooner. Recommended. View detail
Easy to carry.
Main is used at home for ChainMaintenance.
I carry it in the Back in case of an emergency when touring in the woods.
It's not suitable for heavy maintenance, but it's a useful product to have.
View detail
For Smartphone Mount.
When I mounted the phone on the Ninja250R, it was difficult to see downward, so I put it on the Mirror. So I put this on Mirror. View detail
These are necessary items for emergencies.
[Was there anything that disappointed you?
There was rust in the Shaft on the Inner side.
Do you have any wishes or improvements you would like to make for the Manufacturer?
The adhesion of Rubber is weak.
[Do you have any products to compare it to?
Swingarm Lift StandUN-C5025 by the same manufacturer
Frequently Asked Items
What made you decide to buy?
When I used to do Puncture on a forest road, I almost got underneath the Motorcycle when I used a piece of wood that was lying around.
How was your experience with it?
The rear Tire was able to float with no problem, but there is no place to hook the Front Tire because of the Under Cover, so you have to do some modifications.
Was the installation difficult?
If the balance is bad, you will fall over. Also, wheel stops and Brake Lock are absolutely necessary.
【Please tell me the installation point and hang】
As much as possible, work on a flat surface.
[Was the Instruction Manual easy to understand?
I had no problem with the video on Webike's Youtube.
[Included Parts:were they on?
None
[Others]
It is compact and can be used for vehicle installation.
View detail
Well, it's something I wish I had.
I bought it for cleaning the chain on my off-road motorcycle.
To be honest, the rubber on the receiving end of it is easy to tear off and the price is right.
Since it is a Universal Product, where is Quantity:Set the rear tire to float or
It's quite inconvenient.
This would be a roller stand or a regular hydraulic jack.
You might as well buy it.
View detail