Reviews
Since only the yellow of the wing mark had floated in the motorcycle of black monochrome, the bolt of the cowl was also made into yellow. Yellow looks beautiful in a black cowl and it is very conspicuous. Since a high grade feeling comes out, it i
Since only the yellow of the wing mark had floated in the motorcycle of black monochrome, the bolt of the cowl was also made into yellow.
Yellow looks beautiful in a black cowl and it is very conspicuous.
Since a high grade feeling comes out, it is recommended.
View detail
The titanium alloy and taper cap bolt made from a DEYURA bolt I got the friend to yield!! To it being convenient, M10x40 (pitch 1.25) is two!! We and these two bolts were treated to the fastening bolt for the brakes calipers of W650!! Probably, it
The titanium alloy and taper cap bolt made from a DEYURA bolt I got the friend to yield!!
To it being convenient, M10x40 (pitch 1.25) is two!!
We and these two bolts were treated to the fastening bolt for the brakes calipers of W650!! Probably, it is standard tactics to treat a flange hexagon head bolt, when replacing the bolt for brakes calipers.
.
.
(it is because the outside [ bolt / of an inner hexagon head ] hexagon head bolt is stronger, a tool is not chosen but conclusion by high torque is easy.) -- however, the titanium-alloy bolt transferred by the friend is a taper cap bolt lately.
I understand that this inner hexagon head bolt is a bolt for the upper persons who choose a tool.
Moreover, if it is not technical capabilities of an upper level in bolt manufacture, it will also be the form which is easy to cause a fracture.
.
.
The titanium alloy and taper cap bolt made from the DEYURA bolt here,
It is TSU with very best looks which is carrying out the very fascinating surface!! Since cutting processing is also polite,
I think that it is a Hideyasu bolt!! (by cutting of the hexagon socket which has not caught the center of the bolt head which tends to be in a crude taper cap bolt)
I think that there is no fracture in use of the bolt to the product made from a DEYURA bolt. However, inner hexagon head bolts, such as a cap bolt and a taper cap bolt, are also bolts which choose a tool.
if a wrench with accuracy or low reinforcement (HRC hardness) is used -- NAME -- I am easy -- it is also a bolt!! In Webike, when purchasing the cap bolt and taper cap bolt made from a titanium alloy, I also recommend the purchase of a high-quality wrench.
I think that the wrench of Mytho Roy, TONE, or PB is suitable!! Looks are TSU which brings about an impression cool as it is in a picture and which is a taper cap bolt!!
It may also be the characteristics of a cap bolt or a taper cap bolt that many benefits obtained from the performance which the bolt has will become fabrication easily simultaneously if the technical capabilities of choosing a tool and a manufacturer are not an upper level.
.
.
a delicate taper cap bolt -- general -- the maximum -- it is one of the lightweight bolts.
I think that a feeling of possession and a degree of satisfaction are high products if careful of handling.
Postscript: When using it for the fastening bolt for brakes calipers of W650, the titanium washer made from POJIPORINI (M10) is needed.
View detail
As for the pure pinch bolt of W650, M10x25 (pitch 1.25) is two. Since a pure pinch bolt turns into a cap bolt, the outside diameter of a bolt head is phi16mm. We are treating the straight cap bolt made from beta titanium (anodizing) now. .
As for the pure pinch bolt of W650, M10x25 (pitch 1.25) is two.
Since a pure pinch bolt turns into a cap bolt, the outside diameter of a bolt head is phi16mm.
We are treating the straight cap bolt made from beta titanium (anodizing) now.
.
.
.
In rare cases.
.
.
To a change of air.
.
.
Transformation of the pinch bolt is enjoyed.
.
.
The flange outside diameter of a bolt head is phi16mm like [ the compact flange hexagon head bolt made from beta titanium ] a cap bolt.
The hexagon-head opposite side is 12 mm.
Furthermore, the design of the two-step style which can also use an 8-mm hex wrench for the hollow of a bolt head becomes a delightful bolt.
Although the product here is a bolt of the design which becomes a two-step style of an inner hexagon head and an outside hexagon head, when using it as a pinch bolt of W650, it will be concluded using an inner hexagon head rather than conclusion using 12 mm of opposite sides of an outside hexagon head.
In that case, the hex wrench which is not in the best pole ball is needed.
The best hex wrench which can be purchased in Webike becomes a hezagonal wrench stick of made in Mytho Roy, the product made from PB, or the product made from TONE.
Furthermore, if it says, L shape hezagonal wrench stick with a ball point will become the optimal.
To the sentence end.
.
.
Decoration parts with larger impact of the improvement in appearance than a function!! Although it may be considered so,
As a matter of fact, road surface flattery nature and dumping become a linear by concluding cfc TOSASU firmly, and a degree of comfort, handling, and breaking are also parts which change to a direct impression.
although KATACHI of a bolt and the manufacturer of a bolt are an individual's liking -- conversion of a pinch bolt -- honesty -- it is effective -- ~.
View detail
The bolt selection at the time of attaching the stand hook slider of an antlion was dramatically pleasant, and equipped with a total of three Brando's bolt. (1): M10x65 made from a tachyon. (2): M10x70+ made from bright logic Duralumin washer made
The bolt selection at the time of attaching the stand hook slider of an antlion was dramatically pleasant, and equipped with a total of three Brando's bolt.
(1): M10x65 made from a tachyon.
(2): M10x70+ made from bright logic Duralumin washer made from a tachyon (phi22mm).
(3): M10x70+ made from beta titanium Titanium washer made from a tachyon (phi22mm).
It is because I was pleasant for the reason for having tried many things to have had a difference of appearance in each in the bolt of a stand hook slider.
[Appearance of (3) may be the smartest after all.
.
.
As a place which attaches a stand hook slider to]W650, the place which we chose is a mount portion of rear suspension.
There are three advantages which treat the parts here.
chain - Chain cover - driven sprocket - Swing arm - Rear suspension etc. -- it is because a role of a protector (bumper) can be expected!! And,
There is also an auxiliary role of the step of a tandem rider and, moreover, there is also a role of the improvement in appearance!! However, equip with the stand hook slider made from an antlion (M10), and by bolt exchange of that,
Since honesty and surprised !! place are a place and a place where stress is added also functionally, that the atmosphere of appearance changes so far thinks that a titanium-alloy bolt is suitable!! Although the product name here is a radial caliper mount bolt,
Such usage also told a certain thing and performed the preparations brush.
How is Appearance of this picture??? I think that it is collected quite smartly.
.
.
Honesty and this customization are TSU which is self-praise!! If one was taken out to W650 and it has equipped with the muffler, on the motorcycle of the set muffler of rear one and 2 Sas,
TSU which is recommendation parts at the highest!! it is -- hello ~ and cool ~!! the suitable good at which it can look without getting bored -- that may be such customization -- ~!!
View detail
Since it was effective when the bolt of the brembo 4 pot casting caliper rusted immediately, it exchanged. Although the stainless was also considered, it was made the titanium about which he feels easy by calling it the circumference of a brake. (
Since it was effective when the bolt of the brembo 4 pot casting caliper rusted immediately, it exchanged.
Although the stainless was also considered, it was made the titanium about which he feels easy by calling it the circumference of a brake.
(Overspecifications ?) Since the pure bolt was a quite wretched bolt, appearance is quite good.
Since there is also still no between, the direction of rust is not known, but it will not rust, since it is titanium.
View detail
It uses for fixation of F caliper. Unless it says, other persons do not understand, but brightness also different from a stainless can be and be self-satisfied. It fastened as screw accuracy was also solid, and there was no uneasiness at the time
It uses for fixation of F caliper.
Unless it says, other persons do not understand, but brightness also different from a stainless can be and be self-satisfied.
It fastened as screw accuracy was also solid, and there was no uneasiness at the time of a lump.
View detail
It was used for the center stand stopper conclusion attached to the muffler made from a nojima for W650. (1): About Center Stand Stopper, it is Polishing at Stain Magic made from Yoshimura!! (2) : Compact Flange Bolt made from Beta Titanium (TIHC-1005
It was used for the center stand stopper conclusion attached to the muffler made from a nojima for W650.
(1): About Center Stand Stopper, it is Polishing at Stain Magic made from Yoshimura!! (2) : Compact Flange Bolt made from Beta Titanium (TIHC-10055-B),
Conversion through the aluminum spacer made from a kitaco (M10 and phi16 mm-H=3mm)!! (3) : When pure, the nut for center stands is concluded with the lock nut.
We applied the screw lock agent and did conclusion by the compact flange nut made from beta titanium.
I say why the bolt of M10x55 was replaced through the aluminum spacer made from a kitaco to the center stand stopper attached to the full exhaust for W650 made from a nojima.
It is for making flush (TSURAICHI) the bearing surface which a bolt and a center stand stopper touch.
Since the bolt bottom did not touch a center stand stopper uniformly even if it inserts M10 v in a direct, the aluminum spacer was used as a washer.
Therefore, bolt length was made longer 5 mm than the thing attached to a nojima muffler.
For details, I think whether it can judge by a picture.
Equalization of sidewall is a promise of bolt conclusion.
A normal function is not obtained, either, if a bolt and a nut do not obtain a flat-surface bearing surface by Kami who ties a certain individual.
The individual which equalization of the bearing surface has not accomplished requires a spacer or a washer.
If language is added to a picture.
.
.
The flange outside diameter of a titanium bolt is 16 mm.
The outside diameter of an aluminum spacer is 16 mm.
The outside diameter of a titanium flange nut is 16 mm.
With the above-mentioned parts, normal conclusion of the center stand stopper made from a nojima is attained.
All the intentions are the performance more than satisfactory!! Webike was got to know and the possibility of customization increased.
I borrow this place and am thankful to Webike.
Thank you Webike!!
View detail
Several kinds of colors completely more foppish than the round screw of the normal of VMAX again used as a screw of a panel will be exchanged according to feeling? Since it is the self-satisfied world and the bolt is also attached, various usage is nice!
Several kinds of colors completely more foppish than the round screw of the normal of VMAX again used as a screw of a panel will be exchanged according to feeling? Since it is the self-satisfied world and the bolt is also attached, various usage is nice! View detail
Two were purchased to the oirufirutakabas of SR400. Although some texture is inferior compared with other high-class bolts, the part price is eye Yasu. . Since the plug part of a wrench is shallower, the touch which is easy to lick carries out
Two were purchased to the oirufirutakabas of SR400.
Although some texture is inferior compared with other high-class bolts, the part price is eye Yasu.
.
Since the plug part of a wrench is shallower, the touch which is easy to lick carries out the point to worry.
View detail
It attached to the trial vehicle and the trail vehicle. It is satisfied with firm structure.
It attached to the trial vehicle and the trail vehicle.
It is satisfied with firm structure.
View detail
When searched with whether there are any good-looking methods in connection with glove BARESU of GPZ900R, this product stopped at eyes. Although what kind of thing or a true place does not turn out to be a NASA type, a design is very well pleasing.
When searched with whether there are any good-looking methods in connection with glove BARESU of GPZ900R, this product stopped at eyes.
Although what kind of thing or a true place does not turn out to be a NASA type, a design is very well pleasing.
It carries out by being strong for rusting, and die length is also suitable so that a bolt may also be the product ? made from a stainless.
Although it is a set of/[ for glove BARESU ] for /mirror-lesses for /upper cowls for /side covers, since its own car is not made into the upper cowl mirror-less, four sets have remained.
Since it seems that a rose can also be purchased, I think the kana which could be used there.
View detail
since the head was small, he seldom felt inclined to apply torque, but it is shut and crowded -- on the way -- come out, a motion becomes astringent and a screw thread becomes foolish -- also shutting -- it became impossible also slight looseness It b
since the head was small, he seldom felt inclined to apply torque, but it is shut and crowded -- on the way -- come out, a motion becomes astringent and a screw thread becomes foolish -- also shutting -- it became impossible also slight looseness
It became the panel of buying a nut splitter.
Since it is convenience parts, is it unavoidable?
Such an inaccurate screw is the first.
View detail
Although the back step was attached at first, a position changes, and since a change pedal is normal when the angle of an ankle is tight when touring etc. are prolonged operation, and it is a multi-step of a daytona, and it changed into the state of dista
Although the back step was attached at first, a position changes, and since a change pedal is normal when the angle of an ankle is tight when touring etc. are prolonged operation, and it is a multi-step of a daytona, and it changed into the state of distance being made and being hard to change, it purchases.
Unlike with the rubber of normal, the straddle to steps, such as a corner, is also effective, and also it is begun to also delete appearance, comes out of it, and is good touch.
It is recommended at those who do not want to change a position.
View detail
Looking for the pure retractable exchange type, made in JP moto mart was purchased. Although there was also uneasiness somewhat since we vehicles were minor and there was no printing in the adaptation vehicle type of ? description of item .. It has eq
Looking for the pure retractable exchange type, made in JP moto mart was purchased.
Although there was also uneasiness somewhat since we vehicles were minor and there was no printing in the adaptation vehicle type of ? description of item .. It has equipped satisfactorily.
If a problem proposal is carried out by force ... if the knurl treatment process and the end cap are attached to an end -- more delightful kana -- I thought ...
however ... it is hard to slide thanks to the knurling, and operativity also improves, and I purchase it, and think that it was good.
View detail
Mr. Webike is abundant in handling of a bolt, and he is good to obtain a size brand needed freely. Since it is [ a shopping basket ] nonperishable, it is dramatically useful to those who come when, and buy and do. Then, the titanium bolt here.
Mr. Webike is abundant in handling of a bolt, and he is good to obtain a size brand needed freely.
Since it is [ a shopping basket ] nonperishable, it is dramatically useful to those who come when, and buy and do.
Then, the titanium bolt here.
He wanted to try Mr. Beta titanium's anodizing, and it purchased.
Texture is dramatically good and can feel Mr. Beta titanium's spirit.
The satisfaction more than a price was able to be acquired.
View detail
Although the one way valve of the long hose was attached until now, since the price was also handy, it equipped with this product. After wearing does not have signs that it separates, either and is attached firmly. However, when it failed to get o
Although the one way valve of the long hose was attached until now, since the price was also handy, it equipped with this product.
After wearing does not have signs that it separates, either and is attached firmly.
However, when it failed to get off the ground, it was unexpected that a gasoline flowed out.
View detail
To KAWASAKI ZR-7S, it is JP moto mart. DEYURA bolt NR peg (bolt-on replace foot peg) silver was attached and carried out. Since it is being fixed in e ring, if an original manufacturer's product has general-purpose snap ring pliers (for axes), it is e
To KAWASAKI ZR-7S, it is JP moto mart. DEYURA bolt NR peg (bolt-on replace foot peg) silver was attached and carried out.
Since it is being fixed in e ring, if an original manufacturer's product has general-purpose snap ring pliers (for axes), it is easy to remove.
There is no work especially difficult except it.
View detail
about processing accuracy, it is satisfactory -- it is . If it often sees, an anodized has slight unevenness, but it is a hardly worried level!
about processing accuracy, it is satisfactory -- it is .
If it often sees, an anodized has slight unevenness, but it is a hardly worried level!
View detail