Reviews
RedBlackIt is useful to have.
Wiring in Emon.
We use it for basically everything.
For Motorcycle, I used it to pull Wiring for ETC.
1.25sq" refers to the thickness, which is the same size as the Wiring used for Air guns (Electric Gun).
If you just want to play with Motorcycle normally, you will use the existing Wiring, so you will not use it much.
However, it is very useful to have this kind of toolbox for electrical tools in the rare cases when you want to use a small amount, such as additional Wiring or Wiring branching.
It is convenient to have one of each along with the Red color.
It is also good that it is easily available at home centers, auto for vehicle supply stores, and Motorcycle supply stores in case of a sudden need.
In my case, I have a lot of opportunities to use it in some way, such as creating additional Wiring for playing around with cars or using it in electronics work.
View detail
It's a safe and reliable product.
I purchased this product because I needed it to get an earth reading for the installation of a DriveRecorder in my car.
The product is an ordinary Stag beetle terminal, but it is solid and not unreliable with PelePera. It is a safe and reliable product.
This time, I combined this terminal with a 0.75 cord to make Minus Wiring. I am planning to redo the wiring for Motorcycle's DriveRecorder- etc. in the near future, so I would like to use the rest of this time for Motorcycle.
Well, it is one of those things that you want to Stock because you will often need it.
View detail
Required to convert CUB and CD50 to BlinkerLED!
[How is it used?
When I purchased and installed LED bulbs and Relay to convert Blinker to LED, it turned out to be in a state like Hazard, and when I investigated the cause, I found that it would not light properly unless I interrupted the Wiring of the Pilot lamp with this rectification diode.
Was the one you received as per Image?
Two Wiring with nicely coated Diode were in the box.
Was the installation difficult?
First of all, electric pliers and terminals must be mounted as part of the Wiring process.
Next, it is necessary to interrupt Wiring to the Indicator Lamp.
How was your experience with it?
It now lights up correctly!
[Included Parts:were they on?
There is nothing, but the direction of current flow is indicated on the box.
[Was there anything that disappointed you?
Not at all.
If you have ▼BlinkerBuzzer attached, you will need this Wiring separately.
View detail
Bullet Terminal for Motorcycle
I searched several mass retailers for a CB103 Honda type Bullet Terminal for my motorcycle, but could not find one, so I searched webike and found it. I searched webike and found it and bought it. Thank you very much for your wide variety of products.
The Bullet Terminal for Motorcycle is small. (I didn't know)
As for the product, it is an ordinary Bullet Terminal and I have no particular impression of it.
View detail
Fits: HONDA XR250, HONDA CRM250R, HONDA CRM250AR, KAWASAKI KLX125, HONDA CRM80, HONDA XR230, HONDA CRF230F, YAMAHA WR250X, YAMAHA WR250R, YAMAHA SEROW250, YAMAHA XG250 TRICKER, SUZUKI DR-Z400SM, SUZUKI DR-Z400S, KAWASAKI KSR110, KAWASAKI D-TRACKER-X, KAWASAKI D Tracker, KAWASAKI KLX250, KAWASAKI D Tracker 125, HONDA CRM50, HONDA CRF250M
It is good to be Small Type
I had bought another Relay before to replace the Tail Lamp LED, but it broke and made a cracking sound when I fell down or did something to it. I thought it would be better to buy the same one, so I bought DRC's Relay this time.
Installation is easy because of its small size, but it does not come with a connector, so it must be purchased separately.
We'll have to see how durable it is, but it's DRC, so I have high hopes!
View detail
The Emon terminals on hand will not work.
I saw a comment that Emon's plug receptacle was too tight to fit in the Harness plug receptacle, and the product description said it used the Bullet Terminal made by the company, so I had no choice but to buy it.
Naturally, it was installed without irritation.
View detail
Key cylinder broken and replaced
It is cheaper than buying OEM product, and it is good because it is with Tank Cap. View detail
I don't know if you will use it right now, but you should definitely Stock it.
We assume that those who purchase this product here already have a specific purpose of use in mind.
However, I do not have or have never used one that I would recommend.
Locking Wiring Band is used not only for Wiring but also for various Situations.
If you do not have it at that time, you may interrupt not only the work efficiency but also the work itself.
Therefore, we strongly recommend that you keep several similar products in your Tool Box.
WiringTools, as represented by this product, are also very useful to have in everyday life.
It is also a first-class Manufacture product, so again, if you don't have it, you should get it.
View detail
Emon for peace of mind!
I use it to bundle Wiring, and although it is a little more expensive than the 100s, once I bundle Wiring, I never know when I will touch it next under Cowl, so I try to use Emon's, which is a little more expensive, but still reliable. View detail
Wiring Protection
Used to wrap Wiring, easy to roll, soft, elastic and good looking, but a little expensive. View detail
I wonder if it could be a little cheaper, I'm looking for 8cm re-release.
Used for Clutch Cable of THRUXTON900
A little short. Is the 8cm one discontinued?
I cut and add the for Motorcycle's and use them.
It's expensive, isn't it? How about half price?
View detail
Cheap and sufficient for your needs
Quantity of Fuel Hose from Carburetor:This is a must-have when taking out 2pcs. It is more reliable to use Gold Pipe, but I always use Material because it seems to cause strange interference with Carburetor's body and they may cut each other.:Plastic is the choice. View detail
Fits: Others KEIHIN(KEIHIN)PWKΦ28MCarburetor, Others KEIHIN PWKΦ28Carburetor(Old type), Others KEIHIN(KEIHIN)CRMINIΦ22Carburetor
for PC20.
I lost this part for PC20 and was looking for it for sale in Single Item.
It was helpful to have it available in Single Item.
View detail
that's all right
Used with EngineWiring protection. It looks better than the Sbiral Tube. I think it is good for engine wiring protection, especially for LargeEngine Displacement Volume Motorcycle with high engine heat. Cost is high and it is difficult to install. View detail
The cable of 0.75sq purchased to an electric spectaculars and electric reconstruction. Although the line of 0.5sq is sufficient as a matter of fact, I would like to use here in Black's single and the scene where capacity is larger. It is in the st
The cable of 0.75sq purchased to an electric spectaculars and electric reconstruction.
Although the line of 0.5sq is sufficient as a matter of fact, I would like to use here in Black's single and the scene where capacity is larger.
It is in the state which is still waiting for that time now.
The 5-m size which can be used with a sufficient degree is good exactly.
View detail
When a blinker is changed for an external article, it purchases in order to relieve attachment and detachment of wiring which had become plug connection. Case 1 formula and the terminal + reserve are contained.
When a blinker is changed for an external article, it purchases in order to relieve attachment and detachment of wiring which had become plug connection.
Case 1 formula and the terminal + reserve are contained.
View detail
Fits: HONDA XR250, HONDA CRM250R, HONDA CRM250AR, KAWASAKI KLX125, HONDA CRM80, HONDA XR230, HONDA CRF230F, YAMAHA WR250X, YAMAHA WR250R, YAMAHA SEROW250, YAMAHA XG250 TRICKER, SUZUKI DR-Z400SM, SUZUKI DR-Z400S, KAWASAKI KSR110, KAWASAKI D-TRACKER-X, KAWASAKI D Tracker, KAWASAKI KLX250, KAWASAKI D Tracker 125, HONDA CRM50, HONDA CRF250M
Neither blink nor lighting is carried out. It was the same although it did by other motorcycle. If it returns to the relay of normal, it will operate correctly. They are inferior goods!
Neither blink nor lighting is carried out.
It was the same although it did by other motorcycle.
If it returns to the relay of normal, it will operate correctly.
They are inferior goods!
View detail
The product of a kitaco is TSU which is only a product saved cheaply and joyfully!! Custom-made plan of the blinker of W650. (The 1) TSU which is appropriation wearing about the blinker of 250TR W650!! First of all, it is exchange about the conclusion
The product of a kitaco is TSU which is only a product saved cheaply and joyfully!! Custom-made plan of the blinker of W650.
(The 1) TSU which is appropriation wearing about the blinker of 250TR W650!! First of all, it is exchange about the conclusion screw of the blinker lens of 250TR.
Since an authentic positive one is iron and it is easy to rust, parts are replaced to the tapping screw made from a stainless!! YO from which the tapping screw for the pure blinkers of a zephyr system or a vulcan system is incidentally also set to M4x25.
We did two-piece (a total of 8) acquisition of the product here, and were taken as the screw of the blinker lens of order.
*) -- The stock case of W650 becomes the relay of 12V/15W.
Relay exchange becomes indispensable when diverting the blinker of other vehicles to W650.
Relay #27002-1101 for 12V/21W (product blinker conversion-code made from posh is followed.) = Kawasaki original manufacturer's product
.
.)
View detail
flame resistance
When installing the Oil Temperature Meter, we used it in place of insulation because the wiring passes close to the Exhaust System.
Insulation and flame retardant are different, but it seems to be Large sturdy up to 95 degrees, so I installed it thinking that it is better to have it protected than not.
This is recommended because it improves the appearance as well as the protective function.
View detail
Large Activity
External Tachometer installation
Used to pick up the Pulse signal.
We were able to differentiate ourselves from other Wiring
View detail