Reviews
Simple and easy to understand!
This time, I purchased it to check the ACC power supply from the fuse box for the installation of a car's driver's record system. The LED glows red to confirm that power is being supplied. I used it for the first time, but I had no trouble with it by referring to the instructions in the Emon site.
In other people's reviews, it seems that it is often used in Motorcycle electrical tinkering, and I would like to put it in my tool box and use it.
View detail
That would be handy
It is convenient to have, and when you do vehicle maintenance by yourself, you can easily measure the battery without taking out the battery, as long as it is connected to a cord. View detail
It fulfills the functionality required for Simple.
I installed it to constantly monitor for voltage drops when electrical troubles were frequently occurring in my vehicle.
I think it is good that the small type has a simple function of displaying voltage, and also notifies the user with a red light when the voltage drops. The simple functionality makes wiring easy.
The Good
Simple and Small Type. The texture is not bad, and depending on how it is installed, it does not give the impression of being attached afterwards or complicated. It is also a good feature that it glows red when the voltage is low. It is helpful to be alerted when you need to be careful without having to check the values in detail.
[Concerned].
The Contrast of the LCD is weak and the viewing angle does not seem very wide. There is no problem when viewing from the front, but it is difficult to check the values when the Layout is viewed from an angle. In my case, I did not need to check the values while driving, but installed it in a slightly secluded place because I thought it would be good if I could check the values when the voltage dropped to the point that it glows red.
I think the printed logo is too large, which is completely a matter of taste, and the simple appearance is somewhat spoiled, so I think the balance would be better if it were a little more modest.
View detail
For BAT charge voltage monitor
I have often heard that the regulator of RC42 is fragile, and since my car has been driven for more than 10 years, I was concerned about the life of the regulator−, so I installed it to monitor its function.
BAT voltage can be checked immediately by turning BAT S/W ON, and this can also be monitored. It is also a good feature that the back light of the product in question turns red when the voltage is low.
After installation, during the operational inspection in the E/G operation state before driving, we were able to confirm that the indicated voltage of the product in question and the voltage indication of the charging voltage of the BAT section measured with the Tester were almost identical, which made us think that the voltage indication could be trusted as well.
In some cases, there was a slight difference in voltage between idling and driving.
I think it is a good piece of equipment because it can monitor the status of the BAT and the power generation system by monitoring the voltage with it. I am also very satisfied with the cost performance.
View detail
For creating Bolt holes in Gasket
[How is it used?
I bought this to drill Bolt holes for UniversalGasket.
A 6mm hole at the Bolt point of M5 is just right, and a 9mm hole that can be used as For M8 is also a Quantity.:I chose this product because it was a Set.
How was your experience with it?
It takes only a few seconds to pull out Gasket.
I felt that the teeth were in good condition and sufficient for amateur DIY Level use.
How did it compare to other products?
Single Item's or a larger number of Quantities:Set and compared before purchase.
1 pc is rather expensive and a Quantity that contains many pcs.:We chose this product because it is not used as often as the Set product.
[Points to note]
Naturally, you will need a Hammer and a hard Seat to put down when working.
【Review】
It is inexpensive, but it has served its purpose well.
With Motorcycle, it seems that 3mm will not be available, so it would have been best if 7mm had been included instead.
View detail
Air Pressure Check means Large, right?
I bought it because my old one that I had been using for more than 20 years was getting worn out and it was a necessity for me to check it frequently as I ride my motorcycle off-road. I also check my car once a week. I checked on the Net, but I chose this one sold by DAYTONA because of its cost and quality. The length of the hose is exquisite and really easy to use. The previous one was a little short and depending on the direction of the Valve, it was hard to see the Meter, so I had to turn the Tire all the way around. This time I got a good deal. It is my personal preference, but the slanted tip is easier to use, and that was the deciding factor for me to choose this one. I hope you guys will too! View detail
3rd generation
I'm not looking for any particular accuracy as long as I can see the signs of Regulator's Puncture. I'm not looking for accuracy or anything like that, except for the fact that it's 1V lower than the Large body Tester. If it breaks, I'll probably buy the same product again. I have one attached to my car and it has never broken down yet, so I think it might be a vibration or humidity problem. View detail
reliability
I had not managed Torque at all before, but I was a little worried and bought it. I feel totally at ease. I wish I had purchased it earlier. View detail
It is an essential item.
I recommend it because it is cheap and easy to voltage Check. It may be an individual difference, but the surface became sticky about 6 months after I bought it. It works fine, but when I use it, it gets sticky on my hand and is uncomfortable. View detail
I'd like to have one.
I usually do Custom and Maintenance at home, and up until now, I have been tightening by hand lux in almost all areas.
However, as I purchased and read the Service Manual for my car, I wanted to thoroughly tighten the Torque as described in various parts of the manual.
After receiving it, I re-tightened the areas that I had previously tightened by hand with the Torque wrench, and was immersed in the feeling of a tight fit, which increased my satisfaction with my purchase.
Do-it-yourself work is basically your own responsibility. That is why we want to enjoy motorcycle life safely by tightening the parts that can be done.
View detail
Precision Torque Wrench
I often need a durable torque wrench to repair and maintain motorcycles by myself. This STAHLWILLE torque wrench is an original product from Germany. The workmanship is very good. The torque range is 20-100 Nm, which is enough for me to repair motorcycles. , that is, the price is a little expensive. -------------------------------------------------- -------- It is often a durable torque wrench to maintain motorcycles by yourself. This Stahlwille torque wrench is an original German product. The workmanship is great. The torque range is 20-100 Nm. . Powered by Google Translator View detail
sufficient for one's needs
I bought this for Stem Nut and Wheel nut of my car.
The Torque wrench is a fairly inexpensive part of the Torque wrench, but it is not excessive or inadequate.
View detail
A sense of security to tighten with the stipulated Torque.
Used for the first time since purchase for Oil replacement &Clutch cover replacement today.
It is still very secure, unlike hand-look Wrench.
I had a hard time deciding between the Digital type and this one, but I bought this one because it was less expensive.
Pre-set type is a little difficult to understand how to read Memory, etc., but it is easy once you get used to it.
When it came to the regulation Torque, the unique Snap feel was easy to understand and use.
View detail
BoltMeter Installation
Installed to check battery voltage. View detail
useful tool
A useful torque wrench is a must for self-maintenance of motorcycles. This KTC torque wrench purchased by webike has a torque range of 2-10 Nm and an accuracy of ±3%. It uses a highly visible scale to adjust the torque more comfortably. This type of wrench is specially used to tighten some small screws. When the small screws on the motorcycle are not tightened according to the specified torque, they are easy to slip and be damaged. -------------------------------------------------- -------- It is necessary to repair a good torque wrench for your own motorcycle. This KTC torque wrench purchased by Webike has 2-10 Nm of torque range and accuracy of ± 3%. The type wrench is specially used to tighten some small screws. The small screws on the motorcycle are not easily damaged when the torque is tightly fastened. Powered by Google Translator View detail
easy to understand
I purchased this product to replace a Flat Type Fuse Power Supply. The power detection was easy to understand and simple. View detail
easy to use
Self-maintenance and maintenance of motorcycles requires a precise torque wrench. The SK11 digital torque wrench purchased by webike has an accuracy of ±3%, which is sufficient for daily use. The digital display is more intuitive and not easy to make mistakes. The measurement range is 3-60 N meters cover almost all screw torques on a motorcycle. -------------------------------------------------- -------- Maintenance and maintenance requires a precise torque wrench. The accuracy of the SK11 digital torque wrench purchased by Webike is ± 3%. Mi covers almost all screw torque on the motorcycle. Powered by Google Translator View detail
Convenient!
Used to look for a power supply! I want a real Tester but a power supply for now.
Perfect for those who want to find it!
View detail
german quality
I bought this HAZET torque wrench on webike, which is made in Germany. I struggled with other brands when I bought it. In the end, I still think that the big brand HAZET is trustworthy, and the German quality is impeccable. The adjustment range of this wrench is 10-60 Nm, which is enough for my daily maintenance of motorcycles. The webike shopping experience is very good, the delivery is fast and the packaging is intact. -------------------------------------------------- -------- I bought this Hazet torque wrench on Webike. Made in Germany. I tangled other brands when I bought it. Finally, I still felt that the big brand of HAZET was trustworthy and the quality of Germany was impeccable . This wrench adjustment range is 10-60 Nm is enough for my daily maintenance of motorcycles. Webike has a good shopping experience, and the delivery is intact. Powered by Google Translator View detail
I can see the voltage of the Motorcycle with the Cover on from inside the house!
[How is it used?
In winter, I ride less frequently and am concerned about the condition of the battery.
My beloved Z900 is stored with the Cover on, so I can't be bothered to take the Cover off in the cold, remove the Seat, and measure the voltage with the Battery checker...it's too much trouble!
(The Z900 early MODEL does not have a voltmeter, so it is Large strange.)
That's where I found this product. This is good! I thought it was a little expensive, but I installed it. (It cost over 6,000 yen when I bought it)
Was the one you received as per Image?
The code is Quantity:2pc out Material:The plastic small box, which does not have a luxurious feel, was as expected.
Was the installation difficult?
Simply loosen the Battery terminal and insert the Crab terminal and tighten.
The degree of difficulty may vary depending on the battery mounting position, but the Z900 is extremely easy.
How was your experience with it?
While in my room on the second floor of my house, I can check the voltage and battery status of my car, which is parked in the parking lot below me with the cover hanging, using my smartphone.
This is handy!
When used while running, it displays 13-14V, indicating that the regulator is working properly and charging. When used while charging, it displays about 14V. Charging. You can rest assured that it will be displayed as
[Included Parts:were they on?
Double-sided tape for fixing the Body was included.
[Was there anything that disappointed you?
Since it uses Bluetooth, sometimes it is difficult to recognize the Device when the application is launched, but I think this is unavoidable.
Opinions and requests to Manufacturer:.
I would like to install it on my other car or CAR if it were a little cheaper, since I can manage multiple cars with the app.
View detail