Motorcycle Drive Sprocket / Front Sprocket Reviews

Filter

Write a review and get Webike Points!

Reviews

AFAM

20 Dec 2023

Front Sprocket (Steel)

Fits: BMW F700GS, BMW F800GS, BMW F650GS Single

Japanese Webike user

4/5

After considering manufacturing quality and precision, as well as ease of availability

MY2010 F800GS is mainly used for touring and city driving. Although the mileage is not so high, the fee ring around the drive parts is not good and some drive noise is bothering me, so I replaced it.
We purchased this product after considering OEM Parts and each AfterMarketParts. I was concerned about the manufacturing quality and precision. Although it seems to be an imported product (even the manufacturing plant is unknown), it has the JapanFOR JAPAN MODEL inspection seal, and there are no particular concerns about its packaging, material, or processing.
The screw lock agent left in the hollow receptacle screw of the drive shaft (output shaft) was removed as much as possible during installation, and the splines around the outer circumference of the shaft were cleaned, greased up, and the purchased sprocket was installed.
There was no strange sticking feeling or strange rattling, and the excess grease came out in a beautiful flower shape (splined shape) evenly etc. from the gap between the shaft spline and the inner circumference of the Sprocket. This suggests that the machining accuracy of the Sprocket is not bad.
Check the front and back of the spring washer holding down the Sprocket and tighten the specified Torque through the Spacer. (50N・m) Tighten the right screw in the direction of the crank rotation. The usual method to prevent the Sprocket from rotating with the shaft is to apply a chain to the Sprocket before tightening it, or to prevent the Sprocket from rotating by applying driving friction with the chain or by applying a rear brake, but this will not work. However, this will cause the Sprocket to be pulled downward by the weight of the Chain and toward the rear wheel by the tension. I was able to fix the center of rotation of Shaft and Sprocket by gradually increasing the torque setting with the gear in 1st gear and without applying the chain. If you have a problem with the torque setting, this method seems to work fine.
The OEM parts for this year's model that were installed in new vehicles seemed to be made by ZF, but both the OEM parts that came with the vehicle and the products we purchased this time had a solid industrial feel, and I personally have a good impression of them.
Items that may be helpful in the replacement process are a torque wrench and a medium-strength screw lock agent.
AfterMarketParts has a variety of products, but we strongly hope that you will continue to supply products that emphasize material, precision, processing technology, inspection and quality control, and not just price competition. View detail

RIKIZOH

07 Dec 2023

Front Sprocket

Fits: HONDA CRF125F, HONDA CRF125F

Japanese Webike user

5/5

Low.

[How is it used?
I am enjoying playing in the mountains with CRF125F. It is a great machine with no complaints at all, but there is one point that bothers me when I play with it. It is that the first gear is too low and the second gear is too far away from the first gear. I thought it would be better if I could use the 2nd gear a little more. So I bought this product.

Was the one you received as per Image?
I received a product that was probably some kind of OEM Parts Repack. I think I can find out if I look into it, but considering the time it takes to look into it, it would be quicker to buy this product from Rikizo. Gold is the solution.

How was your experience with it?
Dropping one Front works pretty well. It has changed more than I expected.
I can now drive at speeds where I feel like I'm stalling in 2nd gear without having to drop down to 1st.

[Included Parts:were they on?
Fixing plate and mounting Bolt are Standard Equipment. Gentle.

[Was there anything that disappointed you?
Not particularly

Other items that would be helpful
Chain could be adjusted without replacement.

Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
I will load it in my Transporter as a kind of SettingTool. View detail

SUNSTAR

06 Dec 2023

Front Sprocket

Fits: HONDA VTR1000F FireStorm, HONDA NR750, HONDA VFR750F, HONDA XL1000V Varadero, HONDA CB900 HORNET, HONDA CB600F HORNET, HONDA CBF600S, HONDA CBF600, HONDA CBR600F, HONDA CBR1000RR, HONDA CBR600RR, HONDA CBR900RR, HONDA CBR600F4i, HONDA CBR600F Sports

Lim Jun Jet

5/5

good

thats is nice quality and light if you looking for sprocket this is your choose, and good service super fast delivery to other country. View detail

XAM

03 Dec 2023

Front Sprocket

Fits: YAMAHA BRONCO, YAMAHA SEROW225, YAMAHA SEROW225, YAMAHA SEROW225 WE, YAMAHA YZF-R15, YAMAHA YZF-R125, YAMAHA YBR125, YAMAHA YBR125, YAMAHA XT200, YAMAHA TZR50, YAMAHA TZR50, YAMAHA TZR125, YAMAHA TZ50, YAMAHA TY125, YAMAHA TDR80, YAMAHA TDR50, YAMAHA SR125, YAMAHA RZ50, YAMAHA RZ125, YAMAHA RD125

Japanese Webike user

5/5

Used for GSXR125

Used for GSXR-125.
NORMAL428 If you want to change the Front side without changing the Size, XAM's Sprocket is the easiest way to do so.
More economical than 415Conversion. View detail

KITACO

03 Dec 2023

Drive Sprocket (Front)

Fits: HONDA NSF100, HONDA SUPER CUBC125, HONDA SUPER CUBC125, HONDA DAX125, HONDA MONKEY125, HONDA MONKEY125, HONDA MONKEY125, HONDA glom, HONDA glom, HONDA glom, HONDA CROSSCUB110(FI Vehicles), HONDA CROSSCUB110(420Conversion), HONDA CROSSCUB110(420Conversion), HONDA SUPER CUB110-PRO(FI Vehicles), HONDA SUPER CUB110PRO, HONDA SUPER CUB110(FI Vehicles), HONDA SUPER CUB110(420Conversion), HONDA SUPER CUB110(420Conversion), HONDA SUPER CUB110, HONDA APE 100

Japanese Webike user

5/5

Smooth?

When we changed the chain, we increased the number of pins by one and installed a 16T. At first, I was a little worried that I might not have enough power at the start of the ride, but it was not so much of a problem, and on the contrary, I feel that the ride became a little smoother. It may be just my imagination. View detail

KITACO

26 Nov 2023

Drive Sprocket (Front)

mongmonge

5/5

Small gear replacement at an affordable price

I replaced the 14T small gear, which is the same as the original one, without any burden. First of all, I have confidence that it is a Kitaco product, and I expect the product to be durable as well. I purchased and installed the chain and large gear together, and I recommend them because they are satisfactory items at a relatively low price ---------------------------- ------------------------------ It is expected that it is a Kitako product. I bought and installed the chain and the waiting gear together, but I recommend it because it can be satisfied with a relatively low price. Powered by Google Translator View detail

KITACO

21 Nov 2023

Drive Sprocket (Front)

NO NAME

5/5

KITACO Drive sprocket

[About quality and texture] It has good quality that can replace genuine products. [About shipping and packaging] The delivery was very fast, so I was happy to install it quickly. The stapler on the package may be sharp, so be careful when opening it. I will purchase the same product next time. View detail

SUNSTAR

14 Nov 2023

Front sprocket

Fits: SUZUKI GSX-R600, SUZUKI GSX-R750, KAWASAKI W400, KAWASAKI W650, KAWASAKI ZEPHYR750, KAWASAKI ZEPHYR750RS, KAWASAKI ZR-7, KAWASAKI ZR-7S, KAWASAKI ZX-10R, KAWASAKI ZX-7R, KAWASAKI ZX-7RR, SUZUKI BANDIT650, SUZUKI DL1000 V-Strom, SUZUKI GSR600, SUZUKI GSR750, SUZUKI RG400 γ, SUZUKI SV1000, SUZUKI SV1000S, SUZUKI SV650, SUZUKI SV650S

Japanese Webike user

5/5

Zr-7 is now 520.

We have finally achieved the 520Conversion of Zr-7 that we have wanted to work on for a long time.
Since it is not a part that is changed frequently, I installed one Up 17T while I was at it.
My personal impression is that the speed increases after the Engine speed exceeds 5,000 rpm, and it feels more comfortable than with the 16T.
I also did not feel any particular sluggishness in acceleration when starting to open the door from the low RPM range, so I have a good feeling about it in general. View detail

SUNSTAR

13 Nov 2023

Front Sprocket

Lim Jun Jet

5/5

Good quality and light

Good quality and more light more stronger, i will buy it again and super fas shipping. Recommended to everyone. Must try it. View detail

Steel Standard Front Sprocket 1370 - 525

JT SPROCKETS

06 Nov 2023

Steel Standard Front Sprocket 1370 - 525

Fits: HONDA CBR 1000 RR-R FIREBLADE, HONDA CBR 1000 RR-R FIREBLADE SP, HONDA CRF 1100 L AFRICA TWIN ABS, HONDA CRF 1100 L AFRICA TWIN ADVENTURE SPORTS ABS, HONDA CRF 300 L, HONDA CBR 1000 RR FIREBLADE SP1 ABS , HONDA CBR 1000 RR FIREBLADE SP ABS , HONDA CBR 1000 RR FIREBLADE SP ABS , HONDA CBR 1000 RR FIREBLADE SP , HONDA CBR 1000 RR FIREBLADE SP , HONDA CBR 1000 RR FIREBLADE ABS , HONDA CBF 600 S ABS , HONDA CBF 600 S , HONDA CBF 600 N ABS , HONDA CBF 600 N , HONDA CB 650 R NEO SPORTS CAFE , HONDA CB 650 F ABS , HONDA CB 650 F ABS , HONDA CB 650 F , HONDA CB 600 F HORNET ABS

skooby

5/5

Genuine JT Sprocket front for Honda CB 650 F ABS 2017

I purchased this along with the rear sprocket from JT sprockets brand. I decided to get the same brand as I have used them many times before and found the quality versus price is exceptional. Wanted to stick to the oem set up gearing as this is how the bike is supposed to operate. Maybe in the future I will try a tooth lower in the front but for now, stay OEM gearing. Easy part to find, I was surprised Webikes stocked them really and quite a few different versions for different models and makes. Price was pretty good. Ordered along with other parts so the shipping was good too. Arrived with no faults or issues. The outer box had been sealed with extra tape to ensure, nothing could fall out or escape during transit. Any empty space was filled with air pockets and bubble wrap so nothing could move too much and damage other more delicate parts in the box. The machining of these sprockets is second to none. The spacing for the bolts is perfect. No problems with anything really. I have not found a sprocket that is of high a quality for the simialr price range before. I will stick with JT Sprockets. Have fitted before and know how they go on really easy little job. As I said, great quality parts from a great UK company. Thanks Webike for the great service as always and help with anything I need. View detail

KITACO

29 Oct 2023

Front Sprocket

Japanese Webike user

5/5

Very high CP ◎No accuracy problems

[How is it used?
Installed on a JC75 Grom.
The custom is an external Full Exhaust System, Mukawa N-15 High Camshaft, i-map, and a mid to high speed Emphasis on Torque Light tuneSpec. with air cleaner processing.
At the same time, DID's SUPERNon-seal Chain was installed.

Was the one you received as per Image?
The image is just as I imagined.

Was the installation difficult?
The maintenance stand I bought the other day didn't fit, so I had no choice but to ask the Shop to install it.

How was your experience with it?
The 14T was introduced, 1T lower than the OEM 15T. The Grom's 4-speed Mission is easier to enter the power band when the Final is set to CROSS, and acceleration is lighter with a higher GEAR ratio in 4th gear.

As a Merit, the Torque feeling during acceleration has been improved as intended, and the expected acceleration feeling can be obtained even when climbing hills. Also, the maximum speed on level ground has increased.

As for the Demerit, fuel consumption will deteriorate because of the higher cruising RPM, and the noise and vibration are somewhat annoying when cruising at high speeds. Naturally, the maximum speed is also reduced. In addition, Groms have a speed sensor in the transmission, so the speed meter can be inaccurate. Groms are happy (displayed higher) by about 10%, but they are also unhappy by about another 10%. (e.g. GPS:60km/h Meter before replacement:66km/h Meter after replacement:72km/h)

[Included Parts:were they on?
HolderPlate is included; Bolt is also recommended for replacement but not included.

[Was there anything that disappointed you?
Not particularly

Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
If you want to dress-up the Sprocket Cover, you should purchase it first. View detail

Front Sprocket 13 Teeth Steel Standard 428 Pitch Type 1425

JT SPROCKETS

27 Oct 2023

Front Sprocket 13 Teeth Steel Standard 428 Pitch Type 1425

Fits: SUZUKI GSX-R 125 ABS, SUZUKI GSX-R 125 ABS SPECIAL EDITION, SUZUKI GSX-S125 SPECIAL EDITION, SUZUKI GSX-S125

Japanese Webike user

5/5

Front sprocket 14T→13T shortened

[How is it used?
Sports driving in Mini circuit 80
Was the one you received as per Image?
As per Image without any discomfort.
Was the installation difficult?
The OEM was removed and replaced without modification, and the unit was ready to install.
How was your experience with it?
I don't have any experience, but I'm getting the shortening I'm aiming for with Mini circuit.
[Included Parts:were they on?
None
[Was there anything that disappointed you?
None
Other items that would be helpful
No difficulty in installation, tightening torque is 10/Nm.
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer View detail

AFAM

25 Oct 2023

Front Sprocket (Iron)

Fits: HONDA CR125R, HONDA CRF250, HONDA RS125R, HONDA CR125R, HONDA CRF250, HONDA CR125R, HONDA CRF250

NO NAME

5/5

Good sprocket company,Very good cheap reliable

Have tried a few different brands but ended up ordering this one the last couple times I need a front sprocket. Just hit 30 hours on the last one I purchased and it doesn't seem to be starting to "shark fin" at all or get overly worn out yet. Happy with the results again and again. I love buying Afam sprockets, they last just as long as any competitors product in the same quality range, buy one u won't b disappointed.Cheap and very quality.excelent choice Good product at a good price. I have found Afam products always very consistent, and Webike. View detail

NTB

18 Oct 2023

Sprocket

Fits: YAMAHA FZ400, YAMAHA R1-Z, YAMAHA TDR250, YAMAHA TZR250, YAMAHA TZR250, YAMAHA TZR250, YAMAHA TZR250, YAMAHA TZR250, YAMAHA TZR250, YAMAHA TZR250

Japanese Webike user

5/5

R1-ZSprocket

I was worried about compatibility since it is not an OEM Product, but it came on perfectly. View detail