Reviews
Domestic and easier than NORMAL
Suddenly out of V Belt, I was using CHAMELEON FACTORY enhancements, but here they are Change, CHAMELEON FACTORY was torn at about 12,000km I hope it will last about 15,000km I feel secure in domestic production View detail
Fits: HONDA BROAD 90 , HONDA CABINA90 , HONDA LEAD90 , HONDA JOKER90
Durability and other factors are yet to be determined
However, I've only driven it for about 4,000km in 20 years, so I may not have an answer for durability
So the rating is now normal
The texture etc... feels good, but I'm not sure that the OEMBelt didn't deteriorate after 20+ years of use Amazing
View detail
Fits: SUZUKI SKYWAVE250 [SKYWAVE]., SUZUKI SKYWAVE250 [SKYWAVE].
Not as durable as OEMs
If you use the OEM, you won't see much uneven wear at over 20,000 km, but Other Brand Product will wear unevenly over the same amount of distance However, this product is inexpensive as it costs about $3,000 for 6 pieces while the OEM is $1.680 per piece I purchased this product because the delivery time is faster than ordering OEM View detail
Fits: HONDA DIO 1075938-, HONDA Giorno , HONDA GYRO UP initial (TB50MF) initial, HONDA TACT S , HONDA TACT , HONDA SUPER DIO SR , HONDA SUPER DIO BAJA , HONDA DIO CESTA (4ST) AF62, HONDA DIO CESTA (4ST) AF68, HONDA DIO AF27, HONDA GYRO X Medium NJ50MDL, HONDA GYRO X Medium NJ50MDN, HONDA GYRO X Medium NJ50MDP, HONDA GYRO X Medium NJ50MDR, HONDA TACT SZ50W, HONDA TACT SZ50S, HONDA LIVE DIO (YA|J|2J|4J|6J|7J|8J) AF34
Good for cheap!
The acceleration of the AF34 began to slow down, so I replaced it
I was hesitant to buy it because of the special tools needed to replace it I had to prepare the special tools and learn the procedure on the Net before I could do the work, so it was much easier than I thought it would be Smoothly completed
I don't know how long it will last, but I have no complaints about acceleration
View detail
Fits: SUZUKI LETS5 , SUZUKI LETS 4 CA41A, SUZUKI LETS 4 CA43A, SUZUKI LETS 4 CA45A
Good product!
Ued this for CA4AA Suzuki Lets. Old belt was stretched, and sccoter didnt go more than 53 km/h. Now its 62 km/h. Quality looks good. Time will show durability. View detail
Installation is Large funny
The size is perfect so I think that installation is quite difficult unless you grab hang.
That finished product is a good product without Wrinkle.
View detail
Purchase for re-exchange from OEMSeat
OEM's VTR 250's Seat is hard and painful, so Urethaneetc. I adjusted it and it deteriorated while buying it. Although I thought that it is hard to work because impression that I purchased it did not have a mold, unexpectedly the fabric was softened many times and adjusted and it gradually became familiar with the warmth of my hands. Put it down overnight and put a light squeeze again and testRAN done. Once I got on Touring to GW and confirmed Fitting again a little deflection came out so we planned to finish the adjustment at the point where the growth stabilized for a while. Hang of the tightening method temporarily fixes the front side of Seat only at both ends, semi-fixes the Tandem side of Seat, temporarily fixes the SIDE part to trace shape, and makes the whole circumference Quantity : Pair (for Left and Right) Hitoshi etc. While tightening while stretching, during this time Tucker fixed and unfastened repeatedly readjusted. I think that it is important to judge that the elongation of the dough will stabilize after a long time. Finally, the usability is normal fabric and EmbossSpec. I was worried about which to do, but Emboss has a moderate Grip feel and feels good. This maker purchased ordinary fabric for CUB, but the fabric was still thick and slippery. I think it is a correct answer for Emboss. It is only after durability. View detail
If Seat breaks this!
Stitch broke with aged deterioration, purchase this product.
Seat replacement seemed high, but this was cheaply repairable.
The texture does not have any problem, so despairing is Large strange because it is Pitching, but if you put it on, it is Exactly.
View detail
Fits: HONDA little cub, HONDA little cub
Purchased for Seat Replacement of MD50 Reform 75
I was doing a Cover Type on Seat of OEM, but wear of SIDE section occurred, so I bought a Cover of Cover Type this time. Purchased for LITTLE CUB in MD50. Size can be installed without problems. Cover 's fabric is equivalent to OEM and quality is likely to be good internally. Concerning durability in the future. However, Seat of MD is a type that claws cling to the base plate of iron plate and catches the fabric there and squeezes it up. Since there is no durability of the nail, there is a possibility that the nail may break due to rust of the base plate unless it is set to Cover Type next time. Regular Motor
If it is a Type Seat that can be replaced with Tucker, it is recommended as a regular replacement part.
View detail
Fits: HONDA LEAD50 1022348-, HONDA CABINA (Frame number1022348-), HONDA JOKER50 (Frame number1022348-)
belt
Bought this strap is of excellent quality.to replace the old original (honda) to replace the old belt With him..the acceleration was quicker and smoother compared to the worn out like a rag.Recommend; as it showed a good side-grondemend Japanese quality speaks for itself. Great! I bought this belt of excellent quality. Replacing the old original (honda) belt instead of the old belt .. With it acceleration became faster and softer compared to worn like a rag. I recommend; since they showed themselves on the good side, the Japanese quality of grondemend speaks for itself. Wonderful! View detail
Fits: HONDA Grom(MSX125), HONDA Grom(MSX125)
I stuck in the anko bulk but it fitted properly.
【What made you decide the purchase?】
The NORMAL epidermis became hard, and it turned out to be double stitch, because it plays an anko so it looked emphatically.
【How was it actually used?】
Emboss was easy to grow and Sverane was not easy to stretch, but even an amateur could handle it somehow.
Sitting comfort is very good.
Anco is also used for Motorcycle Seat Material "BodyDoctor" I forced a rough pillow. Grom Seat of torture became a high-class Sofa and it looks better and it is highly self-satisfied.
【Was it difficult to install? (Hard parts case)】
HandTucker sometimes loses its foundation and the core does not get stuck. I think that if you have Air Tucker you can change it comfortably.
【Please tell me the point of installation and hang (in the case of Hard parts)】
As I noted above, HandTucker uses a lot of grip strength. Should be challenged with the preparedness to redo many times without sticking.
If you do not want, I recommend using Air Tucker or Electric Tucker.
【Fit feeling and height when wearing - Please tell me the weight etc (Apparel case) ]
[Is there anything I was disappointed about?]
At first we arrived in the case of the cylinder and I was worried about the crease. Because I put up for the bread in the anko bulk, I did not care about the folds.
【Hope for Manufacturer - Please let me know if you have any improvement points]
Because the price was 4000 yen due to mistake in PC setting, we called and confirmed Manufacturer w
When I did this price I was even more satisfied with w
【Have you compared items?】
None
[Others]
Grom 's pain was also good and I got a good Seat.
View detail
Fits: SUZUKI ADDRESSV125 [ADDRESS] g, HONDA SPACY125 [SPACEY], SUZUKI ADDRESSV125 [ADDRESS] g, HONDA SPACY125 [SPACEY]
be careful order grondement weight roller . when i have received different size weight roller in packing . and you very hard contact them by email their serve Delivery to the following recipient failed permanently issue
be careful order grondement weight roller . when i have received different size weight roller in packing . and you very hard contact them by email their serve Delivery to the following recipient failed permanently issue View detail
Fits: HONDA CRM250 R type 1, HONDA CRM250 R type 2
Mistakes in quality
There is Tucker as necessary for reconnection, but unexpectedly it is enough for Daiso's
It ended with the result.
I think that there was no mention, but as Tandem belt was also attached
It was good.
Size feeling was made quite Exactly, so it was a pain to stretch wrinkles
There is thickness, let's put the spirit in because it is also comfortable to touch if you can stretch it cleanly
View detail
It is exclusive for HF 05 and its appearance is finish like refreshing.
At the time of installation, I took a bit of trouble at first, but once I knew the point, it was mounted with Just fit. Work finished in a short time and I am satisfied with Large. View detail
Fits: SUZUKI Address V50 (2-stroke), SUZUKI Address V50 (2-stroke)
I can not say it's the best but it's a good feeling ...
The acquaintance's ADDRESS V 50 Seat cover
I changed it..
The Seat cover of GRONDEMENT is a domestic product but the price is affordable so I immediately decided to purchase it (^^) /
I used HandTucker and Cutter Knife for reloading.
The finish is pretty good and I am satisfied with the completion after the replacement (^u^)
View detail
It is the second purchase ♪
In the Seat replacement of the last time I used ALBA's BluePiping recliner Seat cover, but Piping's synthetic leather faded away without a year.
In the last time I chose BluePiping of GRONDEMENT.
Piping felt a little cheesy with Vinyl, but it lasted over a year and a half.
I wonder whether Piping's fading will be limited to some extent by any material.
Then, along with that, please select the Seat cover of GRONDEMENT again!
A little expensive, but EmbossSpec. I made it to
It is the third time for rewinding, and it ends 30 minutes or less ♪
EmbossSpec. It feels good to have Custom feeling ♪
View detail
Fits: YAMAHA Cygnus X [Taiwan 5th term]., YAMAHA Cygnus X [Taiwan 5th term].
Exchange once every 10,000 kilos
I do not understand driving system exchange of Scooter very well.
Even if you know what to replace, like Oil, it is a consumable item ....
If this All in One set, there is one replacement part and it is convenient. There is no need to think about combinations in particular.
View detail
We have solid details
Three months have passed since it took effect, but there is no problem in quality at all.
When I looked at the product after it arrived, I was thinking that the detail was tailored well and quality is high. I felt that the dimensions are perfectly matched and also durable.
The attached Instruction Manual is also very satisfied with kind contents. I think that I'm glad I bought it although it costs a little bit.
View detail
Fits: YAMAHA APRIO , YAMAHA JOG , YAMAHA JOG SPACE INNOVATION, YAMAHA JOG-Z II 04, YAMAHA JOG-Z II, YAMAHA JOG-ZR 03-04 [5SW1-3], YAMAHA JOG90 Sports , YAMAHA VINO Classic , YAMAHA BasicJOG , YAMAHA AXIS 90 PROFOOT , YAMAHA SUPER JOG Zr 3YK9, YAMAHA SUPER JOG Zr 3YKA, YAMAHA SUPER JOG Zr 3YKB
Used with ASIX 90.
I purchased Repeat.
I think that it is slightly wider and slightly longer than NORMAL.
I think there is no slip and durability is perfect.
Both the starting acceleration and the maximum speed are the best among the belts I used to date.
I think that it is a recommendation for NORMALEG of Pulley and Clutch Spring exchange degree.
View detail
Tight
It's tight, so if you can slowly cover it while stretching it entirely, it's Exactly. There seems to be some wrinkles, but it seems to get familiar with time. My fingers hurt while working. Once you bend it, it will not move so it's redone. View detail