Reviews
With Grip exchange
I used SUPER BIKE before but I bought a Domino which is selling well this time recently.
Large I am strange.
Tanketc. I will also match the color of. And since there is abundant color shade, we can recommend it to everyone.
View detail
My hands are small, so it's very good
I changed my hand from OEM so I put this on hand. OEM was a little big and it had to be grasped firmly but this was small diameter and it was able to grasp firmly with Small irregularities of nonslip. She got a little ride but it was said that Accelerator operation became easier, and when I noticed, her motorscycle also had a color difference of this
Perhaps it is recommended for women who are a little handy.
View detail
Race type
I have Small hands, this thinness is just right I feel a firm feeling of grip and feel Clutch lever lightly. I installed it on GSX 1300 R HAYABUSA but after cutting the protruding part of the adjustment inside the Grip, I could wear the Grip adhesive separately sold without any problems.
View detail
I had trouble with PRO GRIP
I was worried about PRO GRIP, but it is the first domino good as a result.
Touch is also a soft feeling of sucking into Gloves.
I do not know the durability, but since it is a consumable item, I think that it will be changed if it decreases.
I will do this for the next exchange as well !!
View detail
Fits: HONDA CL72, KTM 990 ADVENTURE, KTM KTM 690 ENDURO, KTM KTM 690 SMC, KTM 400EXC, HONDA XLR250, HONDA XLR250 R, HONDA XL-DEGREE, HONDA XR230, HONDA XR230MOTARD, HONDA XR250, HONDA XR250 BAJA, HONDA XR250 R, HONDA XR250MOTARD, HONDA CT250S SILKROAD, HONDA CL400, HONDA CL77, HONDA SL350, HONDA XR400 R, HONDA XR400Motard
Maybe a bit thick ...
I chose Orange, but ...
Well I bought it but this color is difficult to match.
Choice of color carefully.
Since there is a Wiring groove, it is GOOD.
Because it is Made in Italy, it will be slightly thicker over there?. Changing from NORMAL surely gives a sense of incompatibility.
View detail
I bought it at MAJESTY SG 03J
I like it very much.
The exchange was also easy.
Length can be adjusted so it is also recommended for those who customize Handlebar.
After all Grip is Rubber is good!
View detail
favorite
I seemed to be popular so I bought it
The price is also easy to purchase at the price
Color also Red with Black
Because it was one that fits my MotorcycleColor
It was good.
View detail
As expected
I was glad that it was attached to the CB1300SB that I was on before, so I will transfer and change from OEM.
Separately the OEM was not wearing out, but the feeling of the ruggedness of OEM was bad compatibility and it was uncomfortable, so I exchanged it.
Apply only half of the Grip bond and wipe off the slow dry Parts cleaner and push it in. Replacement is completed after drying.
Grip 's Shi Bird feeling and a little soft grip feeling is good.
However, it gets pain from the soft part of the character.
Let's try it Race type this time.
View detail
Fits: HONDA XL250, HONDA XL230, HONDA XL200, HONDA TLM220, HONDA TLM200, HONDA SL230, HONDA MTX250, HONDA ELSINORE 250, HONDA FTR250, HONDA CTX200, HONDA CRM250 AR, HONDA CRM250 R, HONDA CRF250L, HONDA CL72, HONDA CL175, HONDA AX-1, Others , YAMAHA DT200 WR, YAMAHA DT200 R, YAMAHA DT-1
Although I purchased CROSS processing, I like it!
I looked at Catalog and purchased CROSS processing favorably.
In fact, when installing, certainly CROSS processing on the fingertip
The part fits the fingertip, but I feel a sense of incongruity unlike my expectation.
View detail
Grip
I changed it from OEM to this grip, but it feels soft and sucks on my hands, it is very nice.
At the time of replacement, I thought that a hole is a little tight..
View detail
Feeling like sucking
There is no seismic resistance about Pro grip, but the feel like aspirating on the palm is pleasant.
Compared to OEM, it is slender and starts to feel a bit incongruous.
Quantity characters : Pair (for Left and Right) If you want to match symmetrically and exactly to the same position, you'd better adjust the Clutch side after first deciding the Throttle side.
Also, in the case of attaching to ninja 400, 650 it is better to cut Rib on Throttle side.
It is recommended because it is easy to install and affordable.
View detail
May be good for One Point
Design carved logo on HondaOEM
Before this I used the same shape Grip without Domino Logo (Same shape as Honda OEM)
It is softer than the Honda OEM Product, and the inside is thinner, so the operability is good
There is a groove of Wiring
Although it is burdened considerably by Circuit driving, it seems to be turning around from Logo
Only part of Logo It is a good place not to be vulgar even if you put a color with One point in Color
Because I did not want to make it stand out, I made it to Gray but w
Price slightly higher than other Grip 'д `)
View detail
Cool!
It is good for OEM's Grip to run nearby in a rough shape,
When I became a Touring of 200 to 300 kilometers, my palm had become painful all the time, so I tried changing this time! It was the same thickness as OEM's Grip
Hello, there was no discomfort at the time of grasping. And it looks awesome, it's cool! Cool! The palm does not hurt, so it was good to change!
View detail
Fits: KAWASAKI GPZ1100, KAWASAKI ER-6n, KAWASAKI EX-4, KAWASAKI GPZ1000RX NINJA, KAWASAKI GPZ400, KAWASAKI GPZ750, KAWASAKI GPZ900R NINJA, KAWASAKI NINJA400R , KAWASAKI NINJA650 R, KAWASAKI W400, KAWASAKI W800, KAWASAKI Z1-R, KAWASAKI Z1, KAWASAKI Z1000 (water-cooled), KAWASAKI Z1000 KZ, KAWASAKI Z1000 Air cooling, KAWASAKI Z2, KAWASAKI Z400, KAWASAKI Z750, KAWASAKI ZEPHYR1100
Cool in Simple
【Deciding factor of purchase】
Design, Color and Price
【Actually using】
There is one feeling with Black Handlebar, Simple but not cheap.
【Was the installation difficult?】
I think that it is working time of about 10 minutes.
【Point of installation and hang】
Handlebar diameter (Quantity : Pair (for Left and Right) Because it is different) Confirmation, do not forget to attach glue.
[Is there anything I was disappointed about?]
What was Made in Italy. (Though it was good)
【Have you compared items?】
I was searching for the same price range.
[Others] Packing was solid in the mold of Plastic for the price.
View detail
It was easy to install
It is 127 mm, but I put Urethane's curlers.
Handlebar is about to hide a little.
Axel may not have needed it w
Wiring is 0. 55mmQuantity : It is 2pc multiplied.
There is Custom feeling in design as well.
View detail
Fits: HONDA CL72, KTM 990 ADVENTURE, KTM KTM 690 ENDURO, KTM KTM 690 SMC, KTM 400EXC, HONDA XLR250, HONDA XLR250 R, HONDA XL-DEGREE, HONDA XR230, HONDA XR230MOTARD, HONDA XR250, HONDA XR250 BAJA, HONDA XR250 R, HONDA XR250MOTARD, HONDA CT250S SILKROAD, HONDA CL400, HONDA CL77, HONDA SL350, HONDA XR400 R, HONDA XR400Motard
Because there was not always
I always liked PillowTop of Pro taper and it was my favorite, but this time it was a missing item and the delivery date was undecided so I chose it looking emphatically. It is different from a soft feeling that is kind to the hand like PillowTop, but this seems to be easy to grasp without sliding firmly with the palm that makes me think it is this.
There is also a groove for Wiring and it is a solid product.
View detail
As expected
I chose domino the same as last time. Usability and so on are the best in the past. There are also two Wiring places. As I used it, although there were some peeling etc. of the part of Black and Gray, I think that the durability is higher. I decided to exchange it due to a fall in this time, but I like it not to mention anything other than this Grip.
It is decided to kore after the next time.
View detail
Although the OEM is not worn out - - -
I exchanged it for a change of pace!
The color is matched with the color of the car body and it is cool.
I feel that I feel comfortable to run as I feel that I ran less than OEM Product.
It is Grip I'd like to exchange again as I rub on it.
View detail
I am comfortable
I used quite a lot of Manufacturer 's Grip but Domino' s Grip purchased I tried trying from what I did not know. I thought that the feeling that I weared is unexpectedly slim and I think that I can not rely on it for a moment but the feeling I actually tried is the fine feeling it is surprisingly surprising whether it is the thin material or the Material.
That point is also nice because I have never seen a lot wearing it.
View detail
I can not release it..
Until now I have been using thin for Race of TZ Type. I chose Street Type this time, but I will quite hand in hand. I do not mind the thickness at all. Where noteworthy is the Wire lock, when the Wire cutting process is done to accommodate the Wire cut end. This is good.
It also likes the place that is not too flashy.
View detail