Reviews
Fits: Others
Excellent matching with bremboRCSMASTER
I installed it on a CBR250RR 2023 MODEL. the Handlebar is a kit from Over RACING, but I was able to install it without any problems.
Selected this product to match the brembo RCSMASTER that was already installed.:Pair (for Left and Right) Both can be fitted with Koken's AeroLever, which gives them a unified look and feel and looks great!
The fitting of the clutch cable is not good because it is not an exclusive design of the car model.
Since it is originally an AssistSlipper clutch, the lightness of the operation cannot be felt. The original clutch is quite light.
The rattling of the Pivot on the Lever is much larger than OEM and Eukanaya, Spec. It seems to be
Made in Japan, the texture and construction is very high quality. It also looks good. However, the price is a bit high considering the cost performance. It did not exceed my expectations.
View detail
Is this what you got? Too bad.
The color is totally different from the sample. I was aware of the slight error since it is a picture, but the color is totally different.
The package is listed as titaniumium gold, but the actual color is somewhere between gold and orange.
In addition, one of them is obviously a different color, so much so that I think it's the wrong Material. 。 I wonder if the electrolysis process took too long during anodizing. This product is not suitable for shops that charge for labor.
Since the work is not progressing, we will use it temporarily this time for now.
View detail
Fits: Others RCSMaster Cylinder(Brake/Clutch), Others Radial master cylinder(Brake/Clutch)
Fluid Sweat
After six months, Fluid sweats and ruins it.
Quantity:I bought 2pc and both of them are ….
View detail
Fits: Others RCSMaster Cylinder(Brake/Clutch), Others Radial master cylinder(Brake/Clutch)
Handle with care.
This Hose is covered with Mesh and I like its high quality appearance, and I always use it when I install Master Cylinder of Tank Separated Type.
When I installed it this time, the Hose insert was too tight and the Mesh covering was spread out, causing it to come off and become tattered.
You should not work on it by force because it is only covered with Rubber hose.
View detail
Awww, that's too expensive.
I put the cord together with Tie Wrap and when I found out, the terminal was broken from the root, so I decided to buy Spare immediately, which was about 1,000 yen. But then I saw the price and I was surprised! It seemed ridiculous, so I bought the micro switch with the terminal for solder. Probably because it is a terminal for a weak Print board, it might have broken due to lack of strength.
Maybe this is supposed to be a countermeasure, but it's still expensive!
View detail
Fits: Others , Others , Others , Others , Others , Others , Others , Others , Others
Again.
It's not a good idea to use a black mark to make it stand out, but I was disappointed to see a strange mark on the Top of the page & hellip; it's not OEM, so I filled it with black.
Titanium Coating or more expensive, but I could have used that one.
View detail
![Front Caliper Support [Color Anodized]](https://img.webike-cdn.net/catalogue/images/17014/kok-1113-sv_TS.jpg)
Fits: HONDA NSR250R
Center has not appeared.
I tried installing Quantity : Pair (for Left and Right) Both Center dragged out without coming out. When measuring the dimensions it was around 1 mm so I used Shim and needed a Center sushi. You can use it if you issue Center. View detail
Fits: Others , Others , Others , Others , Others , Others , Others , Others , Others
Defective item?
As shown in the photograph, the cutting part (Both sides) There was BALI? And it was not possible to install as it was.
I managed to fix it with GoldFile.
It seems that there is no problem with the other review, so it may be an individual difference.
Apart from the fact that it has been refined, the shape - function - I think that there is no problem with finishing.
For Brembo Radial Master, but I installed it on the Fire - 7 NBRL 15 HA. Lever also Zita Flight charge lever - for Brembo Radial Master (ZS60-3720 Lever ratio18mm) It has changed to. Originally Brand - is commonly used with Brembo radial master so it can be used without problems.
We are converting to common size, but because the tip end of Push rod Pivot is slightly different from brembo, Koken Mechanical Type Brake Switch can not be used as it is and this product will be in turn.. High
*
Although it has a Hydraulic Brake Switch, it has a negative point on a faulty side or a fee Ring side, and when I looked for a Mechanical Type Brake Switch, I reached the Switch made for for Brembo Koken, - - Development. Although it was a land, it was expensive..
View detail
![Mechanical Clutch Holder L-29 [Holder Only]](https://img.webike-cdn.net/catalogue/images/19291/cl-hld_holder_TS.jpg)
Fits: Others
I did not want to lighten it, but it's pretty light!
The color of Standard Product was a little shabby so I tried it like NORMAL っ ぽ い Black.
It looks good, it became lighter than I thought.
However, there is too much play in Lever itself! It moves quite well up and down.
Besides that price, this accuracy is a structural problem.
Manufacturer here seems to be a lot of good products, but all I bought is Ha Gap.
View detail
Fits: Others Radial brake master cylinder, Others RCSBrake master cylinder
I thought that the thing itself was so good but it was a bad product.
I bought it for RACING correspondence, but it is RCS exclusive item.
In this Bracket, the mounting direction of Tank and Master is arrayed,
Hose forcibly turned out to be overloaded on the MASTER side for a bit.
I never thought that it would be NG regardless of the type of car ...
View detail
Fits: Others Radial brake master cylinder, Others RCSBrake master cylinder
With pictures - - -
I noticed now but it is different from the real thing
Tank and Bracket were different
Did he change Minor?
Fork and Cowl Bracket fall on RVF in this Bracket
View detail
Fits: Others Radial brake master cylinder, Others RCSBrake master cylinder
Master cylinder set
I bought it for bremboRacing radialMASTER. I thought that it was easy to install, but when Tank Bracket's handling was not good, I bent and twisted quite a bit when connecting MASTER and Tank with Hose. View detail
Fits: Others RCSMaster Cylinder(Brake/Clutch)
I am disappointed
Just Dress-up. It is heavier than OEM. I'd like you to make Titanium. I feel that the movement of Lever has improved somewhat. Because it is brembo, I want to stick to one Screw View detail
Along with the 320 mm formation
Purchased along with making the disc of GSX 1300 R HAYABUSA 320 mm
Was.
At first, interference between disc and Caliper by overlapping appropriate Washers
I confirmed the contact surface of the pad to the disc, decided the height and purchased it.
In my case it was 5 mm thick and Large was durable.
I think that the goods themselves are made very accurately.
However, I think that the price is a little expensive.
Since there are also kinds of Aluminum, there is knowledge of materials, can be processed by oneself,
Or if there is a place to underwrite the Gold genus processing nearby,
With a price of two thirds
I think that it is possible to produce it.
* Anodized of surface treatment is also necessary.
When there is circumstances like me and there is not time to install,
When there is no place to process nearby etc.. The
It is recommended.
View detail