Reviews
A little cheaper would be nice
Short fender was installed along with the conversion to side number.
It is easy to attach with double-sided tape.
It would be helpful if it were cheaper since it is just a Reflector.
View detail
Required for Fender Eliminator vehicles.
To increase the rigidity, I used Cemedine's METAL LOCK to fix the License Plate Holder firmly and attached it to the Reflector Bracket. View detail
Reflector should be attached.
I had a Fender Eliminator on my Axis Treat and cut the bracket that mounts the OEMReflector under the Number, so I stuck this product on the rear bracket part of the Pillion Bar of the Wills WIN.
The size is just right and the quality seems to be durable, unlike the ones sold in the 100s.
The double-sided tape provided with the product is a very strong adhesive, so it is best to position it firmly before attaching.
View detail
MONKEY125 pica.
I was using 4 Posh round reflectors on the front and rear of my MONKEY125, when suddenly 1pc. of the rear fell off and was lost. View detail
Installation on DF200E OEMRear Carrier
DF200 DJEBEL, but with DF200E OEMRear Carrier.
The DF200E has a long flap on the Rear Fender, like a Camouflage Flap, so it does not have a reflector in the OEM position of the DF200 DJEBEL. Therefore, the reflector is attached to the Rear Carrier, and a bracket is attached to the rear end of the Rear Carrier for mounting the reflector.
I had been riding without a Carrier Reflector for a while, but every time I looked at it, I felt uncomfortable with the mounting bracket growing out of the Carrier. Surprisingly high." We found out that the product was not as good as we had expected, and we decided to buy this product.
It is a product, but probably the same Size as OEM.
I ordered this product thinking that there should not be many different sizes because it is a standardized product, but I found exactly what I was looking for.
The only concern I have is that the OEM may have a protrusion to prevent turning other than the screw. There is a long hole on the mounting bracket other than the screw hole. This may be an anti-turn feature.
Since this product is secured with only one M5Nut, I thought it might loosen due to vibration.
As a countermeasure, we applied double Nut. I drove about 300 km after installation, and there is no loosening as of now.
This should help improve visibility from behind.
I think items useful for safety.
View detail
Inexpensive and fully functional
Used when converting an off-road motorcycle to a Fender Eliminator.
I also had to repurchase the product because it was broken in a fall, but the inexpensive and simple installation method made it easy to fix.
It also functions perfectly, including the reflective condition.
DAYTONA products with a large lineup of such basic parts can be trusted.
View detail
Use with Bush Face's License Plate Holder.
I combined it with PolishFace's License Plate Holder. I use Cemedine's METAL Lock to fix the Holder and Bracket tightly. It has a good feeling of rigidity. View detail
Exquisite Items that add charm
I put it on because I felt it would add to the cuteness. View detail
Purchased for MOTO LED Edge holder kit
[How is it used?
MOTO LED Edge holder kit's
Purchased as Reflector
Was the one you received as per Image?
Yes
Was the installation difficult?
it's simple
How was your experience with it?
I prefer it without, but without Reflector
I heard that the angle has also changed, so
[Included Parts:were they on?
none in particular
[Was there anything that disappointed you?
None
Other items that would be helpful
The included SpongeSeal was helpful.
I put it on because I think it's good. Vibration prevention?
View detail
Stylish & Compact despite Japanese Vehicle Inspection Correspondence
I was attracted by the compactness and slimness of this Japanese Vehicle Inspection Correspondence. I think it will look stylish in combination with the Fender Eliminator Kit. View detail
My car ZX-6R is also like Motorcycle for International Model.
What was the deciding factor in your purchase?
Side reflectors are standard equipment on motorcycles overseas, and I believe that side reflectors increase the visibility of motorcycles and also help prevent accidents if drivers around you notice them by timing their vehicles quickly. I think it will lead to the prevention of accidents. I installed side reflectors on my ZX-6R as well, just like those for International Model motorcycles.
[How was the product?
EMark Income Reflector, OD is 40Φ, M6 Bolt Fixed Nut with Washer.:1pc., so Quantity:Pair (for Left and Right) Two must be purchased if they are to be matched.
When installing on the ZX-6R, the ReflectorSingle Body hits the Front Fender, so we used KITACO's aluminum spacer collar 5mm and a polycarbonate washer. However, the Bolt's bite is reduced by the amount of spacer, so we installed the Bolt firmly to prevent it from coming off. We are now thinking of measures to be taken in the future.
[Others]
Side reflectors will also be mandatory for New Model vehicles to be certified by the government after September 2023. This revision of the safety standard applies to New Model vehicles that will be certified by the Japanese government in September 2023 or later, and side reflectors are not required to be installed on motorcycles manufactured before that date. However, these parts will increase visibility, although not absolutely, and help prevent accidents by making drivers and pedestrians around you aware of your vehicle by timing it earlier. You may want to consider installing them, especially if you drive a lot at night.
View detail
Reflector
[How is it used?
Was the one you received as per Image?
It was as shown in the Image.
Was the installation difficult?
Easy to install
How was your experience with it?
Size was just right.
[Included Parts:were they on?
[Was there anything that disappointed you?
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
View detail
Very Simple
I think it is solid, not cheap.
I like the fact that Reflector is not blobby.
For DIY installers, please be careful not to forget to buy the License Plate Light.
(I bought it without reading the description carefully and could not install it on my 400cc motorcycle lol).
I would like to utilize this in the future when converting a 125cc Motorcycle into a Fender Eliminator.
View detail
License Plate and Fender Clearance good for less vehicles.
The fixed Bolt on the ReflectorReverse side no longer interferes with the Fender. View detail
Simple and Stylish
It is simple as a bracket and the reflector is thin, so I am satisfied with the reflected look.
It is not cheaply made and is solid.
View detail
COMPRyanS w
It seems to reflect properly. w It was just right for attaching the Camera for the Dora-Reco. View detail
Defective Reflector
The M6 Screw is bent and the Nut will not fit again. We fixed it by setting up the Tap again. View detail
Is the Reflector Bracket a little long?
The Fender Eliminator Kit itself is of good and stable quality, as it has been used in my previous cars, but this time, the Motorcycle is a MONKEY125 with a License Plate.
I am considering to cut the bracket a little and weld it, but the welded part will pick up vibration.
I'm thinking about it because I'm worried that it might break! If possible, it would be nice if the lineup could include one with a bracket that matches the size of the 125cc Nan Bar.
View detail
Easy installation
Attach with a strong double-sided tape like that used in ActionCam.
This makes it difficult to adjust the position, but there is no danger of losing it while driving.
View detail
ナンバープレートなどを夜間に反射する場所に取り付けるために使用されます。そして、それはすべての車に適していると思います。そして簡単な取り付け手を置いてください。可愛い小物です。そしてパッケージも綺麗で気に入りました View detail