Reviews
Maru available in 1pc. units.
I bought this clamp because I wanted to replace the hose clip with a spring-type clamp that stops only when the clamp is in place. The NTB is easier to pick up because the ear part is a little longer than the OEM. The price is lower than other manufacturers, and I am glad that I can buy it in 1pc. units. View detail
Brake fluid leak stopped.
Used to fix hose between Brembo master and bremboTank.
Previously fixed with Tie Wrap, but Fluid leakage occurred.
I fixed it with this Clamp and the leakage stopped.
View detail
Good Quality & Packaging
The quality of the item is good without any scratches. The item was packed properly even a small piece. So far the item is good as expected. View detail
Wrong size
The clamp that holds the hose on the rear brake reservoir tank was rusted out, so I bought this to replace it, but I actually needed a larger one.
I had no choice but to replace the fuel filter clamp attached to the fuel hose, which was also damaged. The product itself is the same as the hose clamp sold at the gardening supply corner in the home center for about 1pc. 80 yen, but since I got it cheaper than that, I decided to call it good. It's very easy to use, just pinch it with radio pliers and spread it out while attaching it to the hose.
I bought the hose clamp for the reserver tank at Home center and installed it to the right size.
View detail
For safety and security
Purchased to stop the Fuel Hose from Carburetor Vehicles.
Since I use this car for racing, it was troublesome to connect and disconnect the hose without clip. I chose this one because I regretted that it would lead to a large accident if it leaked because what I was handling was Gasoline.
The tightening is strong and the Pliers make it easy to remove and install for convenience and peace of mind.
We practice hurry up and get it done.
View detail
I got the wrong size.
Check the Size carefully!
Texture is anodized, clean
If possible, it would be easier to use if the Hose spacing was a little narrower.
View detail
15.5 diameter hose clamp
These 15.5 millimeter in diameter hose clamps are used with the 12 millimeter hose, both being from Special Parts Takegawa. Webike have these priced very well considering they are a four piece packet. When installing I like to add electrical tape to my plyers to prevent the hose clamp coating from being damaged keeping them looking as new on the motorcycle. They are a nicely designed hose clamp and give a clean look and finish as compared to the traditional style of hose clamp you tighten with a screwdriver. Looking forward to adding more great parts like this from Webike to my Honda Monkey 125. View detail
for Replacement
I bought this one to try for Hose clampfor Replacement.
Stainless SteelMaterial is good, but hang to remove, hard to do if you are not used to it? It seems to be.
It would be easier if the Clip end was a little larger.
The quantity is also half, Quantity:It would be helpful if it was cheaper at about 5pcs.
View detail
removal
I bought this one because I thought it was a large size Clip so that I could remove it by hand because the product that used the Fuel Hose fixed Clip used a Type that I had to remove with a tool.
Quantity:1 Set of 10pcs. is not necessary, at least half Quantity:1 Set of 3pcs. and I hope the price is cheap.
View detail
Hose clip
I measured the inner diameter used last time and bought it, but the Size seems to be Small, and this time, it is an additional purchase of One size up.
The price isn't that high, so I thought it wouldn't hurt to have a few different kinds to trade.
View detail
Normal Clamp
Purchased with Hose
I just hope Hose doesn't sweat and rust...
View detail
Hose Fixing
It is purchase to exchange it to this Type which can be removed by the hand troublesome because the Fuel Hose fixed Clip which is attached now is attached to Type which is removed by the tool use.
The price is not high and Quantity:2pc. It is just the right feeling as Spare and spare because it contains Set pieces.
View detail
Repeat products.
The paint peels off easily, but I love it. View detail
Wide。
It is wide enough to hold well. View detail
Hose clip。
The color is Black so it doesn't stand out. View detail
Easy to use, though.
As you use it, the paint will become noticeably flaky. View detail
Hose clamp。
It's easy to grab and use. View detail
Used with 5mm internal hose
These 9.5 diameter hose clamps from Special Parts Takegawa are used with their 5 millimeter internal diameter hose to create an excellent fit and seal in my breather hose setup. The hose clamps are made from steel with some sort of coating to stop them from corroding, would be nice if you could be made available in stainless steel for a better looking finish. In stock and available from Webike at a great price. A tip to help from scratching up the coating on these hose clamps in to add some tape to the plyers you are going to use to compress the tabs, works a treat and keeps them looking new. View detail
![[Replacement] Hose Clamp](https://global.webike-cdn.net/uiu/impression/202110/21_1019027_6170d1010d804.jpg)
11.6 diameter hose clamp
I am using the internal diameter 8 millimeter clear breather hose from Special Parts Takegawa in this photo and the usual 13.1 diameter hose clamp was not suitable to use with the breather air filter I had one hand as its mounting pipe diameter was small which was leaving the breather air filter loosely mounted on the breather hose. These 11.6 diameter hose clamps resolved my issue by applying additional force on the breather hose and securing the breather air filter to a state that I was more then happy with. Same price per packet as the other sized hose clamps from Special Part Takegawa but for some reason you only get two per packet instead of four. View detail
Extra hose clamps required for my install
I purchased a Special Parts Takegawa catch tank kit that was not designed for my motorcycle and required additional 13 milimeter hose clamps to complete the installation. It is great that the included document contain all the part numbers of the kit so in cases like this you can easily look up where to purchase the part numbers to get the job done. Great quality spare parts at an affordable price. Only down side is at the moment there is no really cheap shipping option to Australia so I need to wait until I have a suitable sized order to make my purchases. View detail