Reviews
The stretch has been improved.
25-pi Short Baffle. I think the sound quality is better with the 25-pye Long Baffle. But the sound quality is better with the 25-pi Long Baffle. View detail
Silencer in all but name
Probably the same etc. as ChromeWorks hp-plus. I do not recommend this silencer for those who aim to muffle the sound. This Silencer clearly improves the sound quality, not muffles it. (-_-;)
However, my impression is where you don't aim to muffle the sound, but it is a good sound because of the increased bass and exhaust pressure. I repeat, there is no muffling of any sound. For your information.
View detail
I've been using it for a long time.
I've been using it for a long time now, and I think it's a great product, no deformation and Large odd. And it is inexpensive. View detail
Fits: KAWASAKI Z1 (900SUPER4), KAWASAKI Z2 (750RS/Z750FOUR)
Nothing, nothing.
MRSRACING Silesa−70L purchased.
As a sound, it's great, but as a pack, it sucks.
Worst driver I've ever had who delivers outside of the specified time, even though the time was specified.
Yamato or Sagawa is the best!
I will never buy from Webig again!
View detail
silencer
I was looking for a silencer to use for a drag style muffler and found one with fiberglass wound on it, and it's perfect. It's the right size, and I like the pulsation and the reverberation better than just adding a baffle to block the noise. If I had known in advance, I would have installed it comfortably, but I suffered a lot because of the sound, but it is very good. I was looking for a silencer to use for a drag style muffler, and I found one with fiberglass wound on it, and it's perfect. It's the right size, and I like the pulsation and the reverberation better than just adding a baffle to block the noise. Had I known in advance, I would have installed it comfortably, but I suffered a lot because of the sound, but it is very good. View detail
![[Xess] Inner Silencer Convex Large Type For Short Xess Exaust System Φ70](https://img.webike-cdn.net/catalogue/images/12600/3-t_00089l_TS.jpg)
Fits: その他
I bought a Repeat and … it's not good.
I bought it because I was using a recessed Φ20 and Φ30 and wanted a Φ40.
For some reason, the convex Φ40 was a little tougher this time. I had to tap it in lightly.
Of course, the Exhaust System is a Zess tube Φ70.
Also, the texture of the paint is clearly different from Φ20 and Φ30, and it looks shiny.
The paint was not applied in some places and there was a little rust floating on the surface. It is a pity.
This quality may not Repeat.
View detail
Effective
I am installing an external exhaust system on my SPACY100, but it has been installed from the beginning.
The volume of the Baffle was too loud and I was tired of the sound, so I replaced it with this one.
The sound muffling effect is excellent, but the Screw that fixes it is a little thin, so I wonder if it is Large sturdy.
View detail
Better shedding.
I bought 22 Short Baffle because I thought 22 and 25 Long Baffle were not enough. 22 Short Baffle is better than Long Type, but the sound quality is better for commuting because the treble is stronger. I would like to try the 25 Short Baffle next time. View detail
just right and good
It's a newly purchased Udrie Beams muffler, but it's a silencer removed, so it's a real cannon sound, so I was embarrassed to go around the neighborhood. ..lol It's a newly purchased Udry Beams muffler, but the silencer has been removed, so it's a real cannon sound, so I was embarrassed to walk around the neighborhood. It's a little bigger than pure, and a little bigger when you're hungry... lol View detail
Fits: KAWASAKI Z2 (750RS/Z750FOUR), KAWASAKI Z1 (900SUPER4)
Tune with Universal Product at a fraction of the cost!
Earls Gear Wye BurnCLASSIC (Car inspection suit) I was not satisfied with the volume of the silencer I replaced with a Universal OUTEX barrel aluminum silencer, so I purchased this product from Universal. I was not satisfied with the volume, so I bought this product from Universal. The outer diameter was a little small, so I wrapped two rounds of aluminum tape around it and adjusted it. The volume became a little louder, but it was still not enough, so I cut the inside core 3mm shorter. It sounds great! I think it is not so large and quiet.
Since we are only tinkering with Silencer, it should be easy to change it back.
View detail
Anyway, it is expensive. And I waited 4 months for delivery.
[How is it used?
Carbon97 was too noisy, so we bought the Sports formula.
For city driving.
Was the one you received as per Image?
Yes
Was the installation difficult?
very easy
How was your experience with it?
Moderately better loudness.
[Included Parts:were they on?
None
[Was there anything that disappointed you?
Anyway, we waited 4 months for delivery. This is too long for this level of Gold genus processed goods.
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
View detail
Doka Smurf Calming
I bought a used car with a Doka Puffo Slip-on Silencer, changed it to a one-seater at 98db, which is just under the volume limit, and registered it.
I tried this one because I wished it was a little quieter, both in terms of public sentiment and for my own personal use.
I know it was originally designed to be mounted on the end, but I don't want to drill a hole in it.
Wrap the stainless wool as shown in the photo and insert it into the connection with the exhaust pipe.
Nothing is fixed, but the exhaust system tube is bent at the end of the connection, so it seems to stop there even if it moves.
As a result, the sound quality remained the same and became reasonably quiet, and starting was a little easier.
However, the poor disengagement slightly worsened the blow-off.
However, compared to the 20cm attachment, it is within the acceptable range, so we were satisfied with the product.
View detail
Bass heavier than expected
It is a change from Small, and it sounds moderately good now. I will run with this for a while. View detail
Muffled sound effect
Peyton Place ShortContiWSilencer was louder than I expected, so I used it.
Before connecting to the Exhaust pipe, it could have been attached to the Slip-on Silencer and the length could have been 20cm.
After use, the volume is much smaller when idling, and I am satisfied that the bass is maintained. When driving, the sound is muffled to a certain extent, and I am satisfied with the somewhat mild sound.
However, After Fire did not subside before, so the Inner silencer could not handle it without a little more shedding or fueling.
View detail
This is my favorite Baffle!
I compared the 22 and the 25, and for me, the 25 was better. the baffle is well made, and the nut is well welded. The sound quality is good with a little bass and I am satisfied with it. View detail
HM300 Baffles
Great price on a hard to find item for the early CB750 HM300 exhaust. Perfect fit & finish. They were an exact fit for my bike. The price was great too, and the service as well! View detail
It sounds stupid on any Silencer.
In the end, I decided not to use the WR250X North American GYTRExhaust System as a retrofit Baffle.
It was easy to install and easy to process, but the Sound is already terrible.
Papa Papa sounds like an idiot.
I now know why the Delta barrel4 makes such a stupid sound, it's because of this poorly built Stainless Steel thin squirrel Tractor that was retrofitted before the Silencer's performance and construction.
In the end, I modified the inner baffle of the OEMSilencer of 2013WR450F and put it on.
The sound has also been quieted down to a pleasant single shot motorcycle sound with a moderate mid-bass.
For those of you who insist on using the Barrel4, I suggest you ditch the squirrel Tractor and get a 2007 FMF Silent bomb or a 2013 WR450F OEM If you have a WR250X, you can use the 2013 WR450F's OEM inner baffle, etc. The sound, torque, and extension will be greatly improved.
View detail
S Size
Here are some additional images from my last comment. View detail
MISTY Misty:Medium-sized car bean-jam-filled wafers (Monaka) Baffle for
Repurchased for inspection purposes
Vehicle 400cc
I think the tube of the Straight part on the Inner side has become shorter than the previous one.
Outer diameter 47mm (marked 50φ on the packing bag)
After installation, there will be a gap of 1-2mm between the inner diameter of the Silencer and the inner diameter.
The Hexagon Bolt is included, but it is a little short.
The volume is quiet as it is only S Size.
View detail
Inexpensive Squirrel Tractor so easy to reuse
I have a 2007 WR250X with the North American OEM GYTRExhaust System on my 2007 WR250X, but since it was purchased used, it does not come with the AleStarPlug, and the sound is explosive.
When I was looking for various parts in my house, I found an old Stainless Steel Oval Baffle for Barrel4 that I had bought before. When I tried it on, it looked like I could put it on if I modified it, so I bought this New Model Baffle, which has a thinner base and is easier to modify. I bought this one.
By the way, the stock I had at home was the Baffle for Barrel4s, so I chose the Squirrel Tractor for the regular Barrel4s, taking into account the circuit driving.
I'm a little worried because of the rattling sound when I put it on my Barrel4, but I'll install it as soon as it arrives and give another impression.
View detail