Reviews
By attaching to a handlebar, in the state where it acted as Locke of the helmet, it can place on a tank and sudden rain has an effect. What a crack cannot attach easily is gladder than anything.
By attaching to a handlebar, in the state where it acted as Locke of the helmet, it can place on a tank and sudden rain has an effect.
What a crack cannot attach easily is gladder than anything.
View detail
Fits: KAWASAKI Z2 (750RS/Z750FOUR), KAWASAKI Z1 (900SUPER4)
It purchases together with a side cover on either side. Since there is no bali as a base of paint application, the surface does not have a crack in a shipping state, etc., either and there is also no necessity for pate etc., this coating is carried ou
It purchases together with a side cover on either side.
Since there is no bali as a base of paint application, the surface does not have a crack in a shipping state, etc., either and there is also no necessity for pate etc., this coating is carried out suddenly and it is very good.
Moreover, since a color is also cream, yellow and a white are likely to color perfectly.
After carrying out guide-peg attachment by the paper of No. 800 just to make sure, it carried out without the surfacer to this coating~clear finishing, but there is no sign that adhesion of a coating also separates well for Kon.
Since it is never difficult work if it does not get impatient but private paint application is done although it is the work which requires experience, perseverance, and the place whose work is possible to some extent, if one hand is challenged, I will regard the manual of a magazine, etc. as interesting.
View detail
Fits: KAWASAKI Z2 (750RS/Z750FOUR), KAWASAKI Z1 (900SUPER4), KAWASAKI Z900 (KZ900), KAWASAKI Z750 (air-cooled)
Although based also on liking, heavy touch of the appearance of a rear circumference is lost and it is felt refreshed. It is hard to throw away the plating fender of normal. Also when a product makes a hole later if needed by the sectional type ma
Although based also on liking, heavy touch of the appearance of a rear circumference is lost and it is felt refreshed.
It is hard to throw away the plating fender of normal.
Also when a product makes a hole later if needed by the sectional type made from aluminum, it is easy to give it, and its reinforcement is also enough.
Since processing of an end is whether it is not quite satisfactory, and is injured during attachment, or an open circuit of cables, such as the worst blinker, also occurs, it is merely necessary to tame with a file.
Moreover, since it will crack if direct attachment of the number plate is carried out, recommendation uses a number base etc. together.
Moreover, since the hole of a bolt has adopted the slotted hole in some places and the location of a tail lamp or a number can be adjusted, unlike the thing of the other company, a good place can adjust to oneself liking.
Fundamentally, structure is solid, and since PMC products are the touch which those who understand the thing of Z well are building, I regard them as there being not only this but many good things.
View detail
This product which only a simple wire is attached to VTR250, and can be attached with a handle part since it was inconvenient was purchased. Since this product has the configuration where it attaches at the time of Locke and a screw hides, it can be u
This product which only a simple wire is attached to VTR250, and can be attached with a handle part since it was inconvenient was purchased.
Since this product has the configuration where it attaches at the time of Locke and a screw hides, it can be used in comfort also from a viewpoint of theft prevention.
View detail
Fits: KAWASAKI Z750 (air-cooled), KAWASAKI Z900 (KZ900), KAWASAKI Z1000 (air-cooled)
I wanted to change into a socket bolt from beforehand. As expected, the slot of the pump head of a plus has been crushed at the time of exchange. Appearance became good and workability also became good. Although all are not exchanging, he also
I wanted to change into a socket bolt from beforehand.
As expected, the slot of the pump head of a plus has been crushed at the time of exchange.
Appearance became good and workability also became good.
Although all are not exchanging, he also still plans to change others by spring.
View detail
There was only a wire type helmet lock in VTR250, and since it moreover could not use unless it removed the sheet, he bought this product. Structure is also dramatically solid and I think that the attachment bolt has also disappeared at the time of Lo
There was only a wire type helmet lock in VTR250, and since it moreover could not use unless it removed the sheet, he bought this product.
Structure is also dramatically solid and I think that the attachment bolt has also disappeared at the time of Locke, and it is not removed the whole helmet lock.
I think that he buys it and there is no loss since a price is also handy.
Although some people have attached to the handlebar, I made as thick on a back load cliff hook on account of a helmet double-stick tape as an adjust rubber blow, and have attached it.
View detail
Fits: KAWASAKI Z2 (750RS/Z750FOUR), KAWASAKI Z1 (900SUPER4), KAWASAKI Z1-R/Z1-RII, KAWASAKI Z1000 (air-cooled), KAWASAKI Z900 (KZ900), KAWASAKI Z750 (air-cooled)
Since there is individual specificity in a car body, although the product made from aluminum worried with kana how, it takes durability and determines it here. However, a bearing surface does not suit a head cover slightly as felt uneasy. If it ru
Since there is individual specificity in a car body, although the product made from aluminum worried with kana how, it takes durability and determines it here.
However, a bearing surface does not suit a head cover slightly as felt uneasy.
If it runs although the liquid gasket was attached and being attached forcibly, an oil blot.
.
It is that I do not have you process it shortly in a familiar motorcycle store.
.
Since appearance hardly turns out to be a product made of a rubber of normal although the goods themselves were dramatically good and I chose Black, it is recommendation also at a normal group.
If durability is also markedly different and even wearing can do the level difference of a bearing surface, etc. finely first, it will see by long Sakka and will be reasonable.
However, the direction which does not have close a way (way) processed without suiting a car body bad [ fate ] like me is whether it is safer to choose the large product made of a rubber of tolerance as individual specificity.
View detail
Since it was L type, management became easy. In the case of the filter of the method of a straight, it accumulates downward and a gasoline may be unable to go easily, but since it fell from the tank when it was this filter, such a thing decreased.
Since it was L type, management became easy.
In the case of the filter of the method of a straight, it accumulates downward and a gasoline may be unable to go easily, but since it fell from the tank when it was this filter, such a thing decreased.
View detail
Although the helmet lock was attached besides removing a sheet to the second-half type of the hornet 250, and applying to a wire once, since it was hard to apply somehow when it was a helmet of the full face, it decided to purchase a helmet lock separatel
Although the helmet lock was attached besides removing a sheet to the second-half type of the hornet 250, and applying to a wire once, since it was hard to apply somehow when it was a helmet of the full face, it decided to purchase a helmet lock separately.
Although he bought other Ho's IMPU for reference, and it is more expensive to be sure, when structure is solid and it acts as Locke, a place called a snap is good.
I think that there is reasonably priced value since the kiln also of the rubber is carried out in between and it does not mourn over an attachment place.
View detail
Fits: KAWASAKI Z2 (750RS/Z750FOUR), KAWASAKI Z1 (900SUPER4)
The beautiful holder was able to be obtained although an authentic positive one had rusted and removed. I wanted you to make surface preparation into a hairline.
The beautiful holder was able to be obtained although an authentic positive one had rusted and removed.
I wanted you to make surface preparation into a hairline.
View detail
ZZR250 thought that it would attach even to a handle since Locke of the helmet was not able to be carried out unless it opened the sheet, and purchased. Although a path did not suit but the rubber needed to be deleted a little with the file at the tim
ZZR250 thought that it would attach even to a handle since Locke of the helmet was not able to be carried out unless it opened the sheet, and purchased.
Although a path did not suit but the rubber needed to be deleted a little with the file at the time of attachment, it is attached exactly and, now, is found useful.
View detail
Fits: KAWASAKI Z2 (750RS/Z750FOUR), KAWASAKI Z1 (900SUPER4), KAWASAKI Z1-R/Z1-RII, KAWASAKI Z1000 (air-cooled), KAWASAKI Z900 (KZ900), KAWASAKI Z750 (air-cooled)
A blot of PITATSU and the oil which stopped. It worried with whether it will wait till the tappet adjustment, or what it will do. use -- cut ~ -- a natural new gasket (also liquid) and torque wrench were used. 300 K runs and it is completely O
A blot of PITATSU and the oil which stopped.
It worried with whether it will wait till the tappet adjustment, or what it will do.
use -- cut ~ -- a natural new gasket (also liquid) and torque wrench were used.
300 K runs and it is completely OK.
View detail
Most helmet locks of VTR250 are impractical and equipped the right-hand drive with this article. Without interfering with car bodies, such as a tank, if a helmet is put on a throttle and it acts as Locke, operation of a right-hand drive becomes imposs
Most helmet locks of VTR250 are impractical and equipped the right-hand drive with this article.
Without interfering with car bodies, such as a tank, if a helmet is put on a throttle and it acts as Locke, operation of a right-hand drive becomes impossible and it can also expect effective crime prevention.
Dust cannot go into a helmet easily, either.
It is very much satisfied.
View detail
The result is very beautiful well and satisfied. However, since it is a little more expensive, I will make it a three stars.
The result is very beautiful well and satisfied.
However, since it is a little more expensive, I will make it a three stars.
View detail
When attaching to a fender less kit, processing is fairly required and it suffers troubles. However, finishing suits a psycho 笙ｪ zephyr well.
When attaching to a fender less kit, processing is fairly required and it suffers troubles.
However, finishing suits a psycho 笙ｪ zephyr well.
View detail
It purchased by that a price is cheap and appearance. Although it is cheap, long stay and short stay follow, and it is not structure cheap to there, either. The function as a mirror is achieved bad [ visibility ]. I think whether to be very mu
It purchased by that a price is cheap and appearance.
Although it is cheap, long stay and short stay follow, and it is not structure cheap to there, either.
The function as a mirror is achieved bad [ visibility ].
I think whether to be very much good goods, if the point of here ... also considers a price especially.
View detail
It attached to the handle of CB1300SF (FY of SC40). In SC40 of my die, since the normal could not use a helmet holder unless it removed the sheet, it felt and purchased inconvenient. It is compact, structure is also solid and it finds it useful in
It attached to the handle of CB1300SF (FY of SC40).
In SC40 of my die, since the normal could not use a helmet holder unless it removed the sheet, it felt and purchased inconvenient.
It is compact, structure is also solid and it finds it useful in a user friendly manner.
View detail
It attached to the left-hand side tandem step of VFR400R. With the attached rubber board, since it was insufficient, double-stick tape was wound around the step and the path was made thick. Since it can use even if it stores a step and develops, a
It attached to the left-hand side tandem step of VFR400R.
With the attached rubber board, since it was insufficient, double-stick tape was wound around the step and the path was made thick.
Since it can use even if it stores a step and develops, although he thought whether it would be [ attach / to a step ] troublesome in something, it is good touch.
Although a helmet will be equivalent to a muffler, there seems to be no problem which come out all right with heat up to now.
Since structure can also be solid, the configuration can also be devised and whole Locke cannot be stolen easily, it is dramatically found useful.
buying this -- it is .
View detail
Although it investigated to CB750 which is good in a helmet lock, and necessary various catalogues and nets, and structure, and appearance and sense of security were all unsatisfactory, this PMC helmet lock and structure seem to be strong. Sound is li
Although it investigated to CB750 which is good in a helmet lock, and necessary various catalogues and nets, and structure, and appearance and sense of security were all unsatisfactory, this PMC helmet lock and structure seem to be strong.
Sound is likely to sound with a snap and structure and appearance seem to be good.
View detail