Reviews
Blinker relay for what?
I have LED Blinker but it did not function properly.
There should be no problem with the installation, but only the back of the Right Side is permanently lit, even though the Blinker is not activated.
Gold wasted.
View detail
Fits: HONDA APE 50, HONDA APE 100, HONDA FTR223
Handy!
Blinker Bracket can be used in a homemade process, but it's not a problem.
It feels more solid and comfortable if it is designed specifically for it (laughs).
It's not expensive, and considering the finish, buy this one!
View detail
Bracket inside was bent.
When replacing the Tail lamps, the Cover was opened and changed to LED.
When I opened it, I found that the bracket that holds the Screw was bent, and when I tightened the Screw again, it did not fit.
I expect it to be a little more carefully crafted.
View detail
Fits: その他 , HARLEY-DAVIDSON Universal, HARLEY-DAVIDSON Universal
Fashionable, but functional …
[How is it used?
I wanted a stylish small Headlight to install.
Was the one you received as per Image?
Smaller than expected.
Was the installation difficult?
Bracket and other devices are needed.
How was your experience with it?
Depending on the bulb, visibility is not very good.
It needs to be divided as Fashion.
[Included Parts:were they on?
Not particularly
[Was there anything that disappointed you?
It is not recommended to use it as a headlight because it is small and not very bright.
View detail
Fits: KAWASAKI NINJA2 Helmet50RSL, YAMAHA YZF-R25, Others , YAMAHA YZF-R3
Small width is also good.
I used this product because the blinker interfered with the Carrier when it was installed on my SRV250. It could be installed without any problem. View detail
Fits: HONDA REBEL250, HONDA REBEL500, HONDA Rebel300
Light is good, but the light holder is not fit to the fork
The light holder is not fit to the fork, too small fantastic light, not so hard to install. For DIY I used about 3 hours time to install, including demolitation of old turning night View detail
Conversion Code was defective. ( Nope.) Siksiksiks & hellip;
I went out for a test run, thinking that I was able to convert the blinker of the Type 3 Grom to LED, but it turned out that the Left Side blinker was not responding, and after a hasty search for the cause, I found that the attached Conversion Code was not energized.
I bought this product with high expectations and feel bad when I find out it is defective.
And how about the fact that the base of the Blinker insert is plastic molded?
When tightening, be careful not to tighten too vigorously as this may cause deformation.
If you have a budget to spare, we recommend the LED Blinker made by TAKEGAWA.
The base is made of aluminum molding and is solid.
View detail
Fits: SUZUKI V-STROM650, SUZUKI V-STROM1000, SUZUKI SV650 , SUZUKI GSX-S1000
It's a dedicated product and it's pretty good.
The price is inexpensive for everything you need to replace the front and rear LedBlinker. I mistakenly ordered the Blinker Base as well, but there is nothing in particular that you have to buy separately.
I am satisfied with the quality.
One thing I would say is that Relay is not a Coupler, it's like sticking a Wiring into an electrode, so the Wiring is something that (Documents etc.) I am worried that the wire will get caught in the
Other than that, I don't have anything in particular that I don't like.
View detail
A little small
YamahaBOLT Shoulder Bag has a rear blinker that gets in the way when attaching a side bag, so I bought a POSH Rear Blinker Plate and moved the rear blinker to the side of the License Plate. 。 Since the OEMB Blinker shakes a lot due to the vibration of Idling, we replaced it with this one to reduce the burden on the steel BlinkerPlate. 。 It is still shaking, but I think the lighter weight is lessening the burden.
The line coming out of Blinker is Quantity:Pair (for Left and Right) The list of common wiring colors of each company is also included, so I was able to replace the OMBlinker without any confusion.
The Body has a Well texture, and if the areas where the lines enter and exit are treated properly, it appears that water will not be able to get inside even if it rains.
The diameter of the body is 40mm, and the diameter of the Lens part is one size smaller than that. 。 According to the safety standard, the area of the lighting part must be more than 7 square cm. If it is circular in shape, 3 cm in diameter (7.065 square cm) may be considered as a guide for the size of the vehicle inspection conformity limit. 。 The Electronic Catalogue of the ManufacturerSite has the statement "*Not compatible with vehicle inspections", but there is no mention of vehicle inspections on the Mail Order Site or the Product Page of KIJIMA's official website. 。 I assume you mean that they have not obtained an EMark for compliance with the standard, but I remain concerned. 。 The product is good, but I am not sure if it will meet the vehicle inspection requirements, so I cannot recommend it to anyone with confidence.
The actual visibility is also the smallest class of non-LED Blinker (except for non-inspection compliant products), so it is not an easy-to-see Blinker. 。 Furthermore, the reserver tank of the Rear Suspension of the BOLT Shoulder Bag R-spec is gold-colored, so when seen from behind, it is covered with the gold color, making it even less visible. 。 I think I've covered the Reserver tank with black Vinyl Tape to make it somewhat easier to see, but I may replace it with a larger blinker.
View detail
Fits: SUZUKI GSX-S750, SUZUKI V-STROM650XT, SUZUKI V-STROM650
Installed on GSX-S750 (2021)
I bought it because I don't like Blinker common to SEA BASS cars.
I heard a rumor that KIJIMA's LED Blinker, a product dedicated to car models, is easy to use, so I took on the challenge.
The product is dedicated and comes with Relay and Wiring, so there was no need to modify or add anything.
If you have Fender Eliminator on, it needs to be processed.
The Instruction Manual does not show how to do this for the GSX-S750, but I was still able to do it by looking at the text.
I recommend it because it changes the appearance considerably.
I wrote the installation procedure in my blog.
View detail
GSR750 kijma led turn signal lights
I ordered Kijima Signal, which I was using with ink, with a big heart.
It was in stock so I was able to receive the parcel quickly.
Shipped safely with careful packaging.
Unlike the crude and crude turn signal lamps, the sleek kijima led turn indicators have a luxurious appearance.
Installation is very easy and the product finish is neat and nice.
I'm glad that the gsr750 has been enhanced.
------------------------------------------------------------ -------- I decided to order Kijima Signal, which was in light, and ordered it. The slender Kijima LED direction indicator has a luxurious appearance.
The installation is very easy and the product finish is clean and cool. Powered by Google Translator
View detail
Fits: HONDA SUPER CUB 50PRO, HONDA SUPER CUB 50, HONDA CROSS CUB50, HONDA SUPER CUB110PRO, HONDA SUPER CUB110, HONDA CROSSCUB110, HONDA SUPER CUB110, HONDA CROSSCUB110
No dissatisfaction
[How is it used?
CROSS CUB50 (2020) Mounting on
Was the one you received as per Image?
Excellent, opened Parenthesis well and impressed!
Was the installation difficult?
It's said to be difficult, but if you know how to clamp the Bullet Terminal and remove the Coupler, it's a piece of cake.
How was your experience with it?
Number one for individuality, cool like a wave motion gun.
[Included Parts:were they on?
All included
[Was there anything that disappointed you?
nothing special
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
The instruction manual is easy to understand and the bracket can be installed without modification.
High price but satisfaction with the same etc.
View detail
Fits: HARLEY-DAVIDSON FLSTC HERITAGE SOFTAIL CLASSICFLSTF FATBOYES ANNIVERSARYX FLLBS ANX, HARLEY-DAVIDSON FLSTC HERITAGE SOFTAIL CLASSICFLSTF FATBOYES ANNIVERSARY FLFBS ANV, HARLEY-DAVIDSON FLSTC HERITAGE SOFTAIL CLASSIC FLSTF FATBOY S FLFBS, HARLEY-DAVIDSON XL1200C SPORTSTER 1200Seventy-Two XLV, HARLEY-DAVIDSON XL883 Low EFI XLL, HARLEY-DAVIDSON FXDL DYNA LOW RIDER es FXDLS, HARLEY-DAVIDSON FXDX DYNA SUPER GLIDE Tee Sports FXDXT, HARLEY-DAVIDSON FLSTC HERITAGE SOFTAIL CLASSICLOWRIDER es FXLRS, HARLEY-DAVIDSON FLSTC HERITAGE SOFTAIL CLASSIC Break Outes AnniversaryX FXBRS ANX, HARLEY-DAVIDSON FLSTC HERITAGE SOFTAIL CLASSIC BREAKOUT S FXBRS, HARLEY-DAVIDSON FLSTC HERITAGE SOFTAIL CLASSIC BREAKOUT FXBR, HARLEY-DAVIDSON FLSTC HERITAGE SOFTAIL CLASSICFAT BOBES FXFBS, HARLEY-DAVIDSON DYNA WIDE GLIDE FXDWG, HARLEY-DAVIDSON DYNA WIDE GLIDE EFI FXDWGI, HARLEY-DAVIDSON DYNA WIDE GLIDE EFI FXDWGI, HARLEY-DAVIDSON FLSTC HERITAGE SOFTAIL CLASSICFAT BOB FXFB, HARLEY-DAVIDSON FLSTC HERITAGE SOFTAIL CLASSICFLSTF FATBOY FLSTF, HARLEY-DAVIDSON FLSTC HERITAGE SOFTAIL CLASSICFLSTF FATBOY FLFB, HARLEY-DAVIDSON FLSTC HERITAGE SOFTAIL CLASSICFLSTF FATBOY EFI FLSTFI, HARLEY-DAVIDSON FLSTC HERITAGE SOFTAIL CLASSICFXSTB NIGHT TRAIN FXSTB
Is good
It is convenient and discreet to cover the hole where the Blinker was installed.
It is only attached with double-sided tape, so it can be reattached later.
It is good in that it is visually refreshing without compromising the design.
View detail
Fits: KAWASAKI ZRX1200DAEG, KAWASAKI Z900RSCAFE, KAWASAKI Z900RS, KAWASAKI Z900, KAWASAKI Z800, KAWASAKI Z650, KAWASAKI Z250, KAWASAKI Z1000, KAWASAKI Versys650, KAWASAKI Versys650, KAWASAKI Versys-X250, KAWASAKI Versys-X250, KAWASAKI Versys 1000, KAWASAKI Ninja400R, KAWASAKI Ninja400R, KAWASAKI Ninja1000, KAWASAKI Ninja ZX-6R, KAWASAKI Ninja 650R, KAWASAKI Ninja ZX-6R, KAWASAKI Ninja 650
Great fit, worked perfectly
Used a set of these bases to mount aftermarket turn signals on the front of on my Kawasaki Z900RS Cafe. Great product! Bases fit the inside opening where the stock turn signals were located and the hole size was just large enough for the mounting shaft on the new signals. View detail
Fits: SUZUKI V-STROM650, SUZUKI V-STROM1000, SUZUKI SV650 , SUZUKI GSX-S1000
All in one safe Large hand Third party.
The STD Blinker was out of the question, so it was replaced at the same time the vehicle was delivered, and was installed at the same time as the Fender Eliminator from DAYTONA.
Installation is simple and easy, and all parts necessary for installation are included.
The point that needs attention is that the attached ICRelay is a Small Type and has a special shape, so it was installed without insulation treatment such as wrapping Vinyl Tape around the Connector, and the original Blinker relay was there. When the Seat was pushed in and tested, the Fuse in the Position system was cut off.
As stated in the instruction manual, be sure to insulate the product.
After installation, the vehicle looks as expected, but the vehicle is refined at once, and the Parenthesis quality is dramatically enhanced.
View detail
Fits: HONDA CT125 HUNTER CUB, HONDA CT125 CT110 HUNTER CUB
No interference with Fog Lamp
I had installed Endurance's Front Carrier, but I bought it because it was hard to see the blinker when I loaded the car.
However, because of the front carrier, a longer bolt than the supplied one must be prepared separately.
View detail
Fits: KAWASAKI ZRX1200DAEG, KAWASAKI Z900RSCAFE, KAWASAKI Z900RS, KAWASAKI Z900, KAWASAKI Z800, KAWASAKI Z650, KAWASAKI Z250, KAWASAKI Z1000, KAWASAKI Versys650, KAWASAKI Versys650, KAWASAKI Versys-X250, KAWASAKI Versys-X250, KAWASAKI Versys 1000, KAWASAKI Ninja400R, KAWASAKI Ninja400R, KAWASAKI Ninja1000, KAWASAKI Ninja ZX-6R, KAWASAKI Ninja 650R, KAWASAKI Ninja ZX-6R, KAWASAKI Ninja 650
Perfect fit
Used these bases to install aftermarket turn signals on my Kawasaki Z900rs and they are a perfect fit. Takes 2 bases per turn signal, one for the outside and one piece for the inside. Opening for my aftermarket turn signals was was perfect diameter for the turn signals I used to replace the stock turn signals. View detail
Fits: KAWASAKI NINJA2 Helmet50RSL, YAMAHA YZF-R25, Others , YAMAHA YZF-R3
Also for moped local number
[How is it used?
Used to relocate a blinker that interferes with the side bag
Was the one you received as per Image?
Street Image
Was the installation difficult?
Number and co-tightening only.
How was your experience with it?
Happy with Blinker installed as imagined
[Included Parts:were they on?
None
[Was there anything that disappointed you?
None
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
It is a little longer than the widest width of a typical Horizontal Type moped number.
I chose this product because I was concerned that the mounting part of the number transfer bracket for mopeds would be retracted because of the local number.
If you use a small rectangular number, which is often seen in Tokyo, I think the bracket will stick out.
View detail
Design is good, but …
[How is it used?
Small Type Blinker without changing OEM Image
Was the one you received as per Image?
Smaller than expected
Was the installation difficult?
Just disconnect the Wiring and reconnect it.
How was your experience with it?
Design is Large satisfactory, quality is …
[Included Parts:were they on?
None
[Was there anything that disappointed you?
The next day I looked at it and it was dull…
I heard a pushing sound while running, so I removed the Lens and found that the Fixing Screw on the Socket had come off.
Packing of Lens is difficult to fit properly (however, no problems have been observed after driving in the rain).
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
Silver before installation [Color] If you don't paint it with Clear or polish it frequently, it will soon look bad…
It might be a good idea to retighten the screws on the socket (and screw lock if possible).
Rear was moved to the side of Number, but it was not long enough depending on how Wiring was installed, so it should have been longer by 10cm.
View detail
It's good, but a little expensive.
I bought it because I need it to install KIJIMA Nano Blinker
On the positive side, the texture is not bad, and it can be fine-tuned as far as the Bolt to which the Number is attached allows!
The bad thing is that I think it's a bit expensive.
I think this depends on the person, but I feel like it's a Level that I could totally make on my own.
I have a double-sided tape in the contents, but I thought I could just buy it at Home center.
View detail