Reviews
A must-have!
I bought it as a side purchase. Material without permission:I thought it was Rubber but it was made of plastic. It is thick and solidly built.
The cord, which I thought was a bonus, is quite solid and would be an Advantage for similar products not included.
The bicycle parking lot is full of STAND marks and will be used as soon as possible.
View detail
I feel safe.
I am very satisfied with the quality of the Aluminum Cut-out and the angle of inclination of the Motorcycle, which I was concerned about, has been corrected. The area of the road surface is clearly larger than that of the OEM, so I feel much safer when I stop the vehicle. View detail
Good
The price is a little high, but it has good footing.
STAND is hard, which helps.
View detail
Fits: BMW R1200GS, BMW R1200GS Premium Line, BMW R1200GS Rally Premium Line, BMW R1250GS HP Premium Line, BMW R1250GS Premium Line
If you don't mind the price...
I bought it to bulk up the height rather than the width of the seat.
The side stand makes it much better to lean when stopping.
I am satisfied with the quality of the product. Installation is easy with only 3 Bolts.
The drawback is its price, which I knew before I bought it.
Opinions differ as to whether one can afford to pay about 15,000 yen for Side Stand clogs.
View detail
Easy to use
I used it immediately after purchasing it at a touring destination. It was unstable on uneven terrain with the Side Stand alone, but once I got used to using it, it was very stable. The pad itself is sturdy and safe to use. View detail
Fits: YAMAHA MT-09, YAMAHA MT-09 SP, YAMAHA MT-09 TRACER, YAMAHA MT-09 TRACER GT
Side Stand For prevention of sinking
The parking lot where we stopped for touring was gravel, and although the MT-09 with only the Side Stand did not fall over, it was quite unstable because the Side Stand was stuck in the gravel, so we installed it as a safety device.
I would have preferred to have it in black, but the upper plate is stainless steel, so I wondered if that would be cost-effective. I was looking at the instruction manual and found that the Illustration of the Parts was wrong as in the case of SIDEWing….
If you have seen the instruction manual, you should not read it carefully, because it will confuse you.
However, I think it is still a little expensive, perhaps because of the weak yen, so if you are likely to encounter gravel parking lots or scorching hot asphalt on your touring, you may want to consider the risk of not being able to drive due to damage to the clutch lever in case it falls over, and the cost of replacing the lever. Considering the cost of replacing the lever, I think it is a good idea to install the clutch lever as a precautionary measure.
*
View detail
Fits: BMW R nineT, BMW R nineT Pure, BMW R nineT Racer
I'm satisfied
RnineT UrbanGS was lowered and converted to Short Stand. It took about two weeks to receive the product, but it came in one week. I have heard some people say that the Large stand has a thick block and looks ugly, but I don't think that's true. I am glad I bought it even if it is expensive. I am satisfied with it. View detail
Fits: HARLEY-DAVIDSON SPORTSTER, HARLEY-DAVIDSON XL1200C, HARLEY-DAVIDSON XL1200T, HARLEY-DAVIDSON XL883L, HARLEY-DAVIDSON XL883R, HARLEY-DAVIDSON XL1200V, HARLEY-DAVIDSON XL1200CB, HARLEY-DAVIDSON XL883N, HARLEY-DAVIDSON XL1200CA, HARLEY-DAVIDSON XL1200C(110thAnv), HARLEY-DAVIDSON XL883R, HARLEY-DAVIDSON XL1200C, HARLEY-DAVIDSON XL1200X, HARLEY-DAVIDSON XL1200X, HARLEY-DAVIDSON XL1200C, HARLEY-DAVIDSON XL1200NS, HARLEY-DAVIDSON XL883N, HARLEY-DAVIDSON XL1200R, HARLEY-DAVIDSON XL883L, HARLEY-DAVIDSON XL1200C
SIDEExtension
KIJIMA : Since the delivery time for the Side Stand Extension was long, the one from Ippoku CycleWorks was in stock.
I went with this one. Installation was easy. The quality and other features are solid.
When driving, the foot may get a little stuck at traffic lights, but you may get used to it.
View detail
ALL ALL Side Stand End
Installed on a 2014 MULTHI.
The reason for this is to reduce the difficulty of waking up the STAND when it is overloaded during the Hokkaido Touring because it feels like the STAND has been defeated and the inclination is too large.
Although it was not MULTHI compliant, I purchased it and had no problem installing it, but when I paid for it, it interfered with the main stand.
The installation was easy and the quality is satisfactory, but the side stand deformation is not resolved, so we are in the process of purchasing and arranging for an OEM to replace it.
If the deformation returns, it will likely be too thick and will have to be removed.
View detail
JA45CROSS CUB
Was the one you received as per Image?
Image
[How did you feel about the Fit?
Fit perfectly!
I cut and sandwiched the provided rubber sheet and installed it using a strong screw lock agent.
How was your experience with it?
Since the rear tire diameter was increased, I installed it in the hope that it would extend the side stand. (I changed from OEM 2.75 to 3.0 and increased the tire diameter to the extent that the rear wheel stays on the ground when the Center Stand is set up.)
Is it about the same inclination as before the tire replacement?
View detail
Improved stability when parking
After taking delivery of the car, I was concerned about the small footprint of the STAND, so I immediately purchased and installed it. It has a good texture and high rigidity. View detail
Fits: DUCATI MULTISTRADA V4, DUCATI MULTISTRADA V4 S, DUCATI MULTISTRADA V4 PIKES PEAK
My legs feel better.
I am very happy with Ducati's Brake pedal, as most of them are very apologetic. View detail
Fits: HARLEY-DAVIDSON SPORTSTER, HARLEY-DAVIDSON XL1200C, HARLEY-DAVIDSON XL1200T, HARLEY-DAVIDSON XL883L, HARLEY-DAVIDSON XL883R, HARLEY-DAVIDSON XL1200V, HARLEY-DAVIDSON XL1200CB, HARLEY-DAVIDSON XL883N, HARLEY-DAVIDSON XL1200CA, HARLEY-DAVIDSON XL1200C(110thAnv), HARLEY-DAVIDSON XL883R, HARLEY-DAVIDSON XL1200C, HARLEY-DAVIDSON XL1200X, HARLEY-DAVIDSON XL1200X, HARLEY-DAVIDSON XL1200C, HARLEY-DAVIDSON XL1200NS, HARLEY-DAVIDSON XL883N, HARLEY-DAVIDSON XL1200R, HARLEY-DAVIDSON XL883L, HARLEY-DAVIDSON XL1200C
High quality construction
I was looking for a good looking Extension because I was having trouble finding it on my heels when I was putting out the Side Stand. That's when I came across this product in a Custom video and purchased it.
The product was carefully packaged and the product itself seems to be of high quality and carefully made. After installation, the STAND was easy to put out and of course, it looks elegant. If the price were a little lower, it would be a perfect score.
View detail
Fits: DUCATI 959Panigale, DUCATI 959Panigale, DUCATI 899Panigale, DUCATI 899Panigale, DUCATI 899Panigale, DUCATI 1299Panigale, DUCATI 1299Panigale, DUCATI 1299Panigale, DUCATI 1199Panigale, DUCATI 1199Panigale, DUCATI 1199Panigale, DUCATI 1199Panigale
Purchased for StreetFighterV2.
Purchased for Street Fighter V2 from the Parts List after confirming compatibility.
The ground surface of the STAND is small, so there is some concern about hanging the STAND on soft ground.
Clearance with Under Cowl was no problem, and it was easier to STAND.
It is not cheap, but if you feel Merit in increasing the ground surface of STAND, you may purchase it.
View detail
Fits: SUZUKI GSX1300R GSX1300R HAYABUSA(GSX1300R HAYABUSA), SUZUKI GSX1300R GSX1300R HAYABUSA(GSX1300R HAYABUSA), SUZUKI GSX1300R GSX1300R HAYABUSA(GSX1300R HAYABUSA), SUZUKI GSX1300R GSX1300R HAYABUSA(GSX1300R HAYABUSA), SUZUKI GSX1300R GSX1300R HAYABUSA(GSX1300R HAYABUSA), SUZUKI GSX1300R GSX1300R HAYABUSA(GSX1300R HAYABUSA), SUZUKI GSX1300R GSX1300R HAYABUSA(GSX1300R HAYABUSA), SUZUKI GSX1300R GSX1300R HAYABUSA(GSX1300R HAYABUSA), SUZUKI GSX1300R GSX1300R HAYABUSA(GSX1300R HAYABUSA), SUZUKI GSX1300R GSX1300R HAYABUSA(GSX1300R HAYABUSA)
demon who obstructs sentient beings from maintaining moral behaviour
The ground penetration was reduced, but not as effective as the price, and eventually they got in the way and were removed after a year or so. View detail
Fits: HARLEY-DAVIDSON XL1200CX, HARLEY-DAVIDSON XL1200N, HARLEY-DAVIDSON XL1200NS, HARLEY-DAVIDSON XL1200T, HARLEY-DAVIDSON XL1200X, HARLEY-DAVIDSON XL1200XS, HARLEY-DAVIDSON XL883L, HARLEY-DAVIDSON XL883N
XL1200XS
I wonder if it's easier to get STAND in and out. View detail
Fits: HONDA CRF250L, HONDA CRF250L(S), HONDA CRF250RALLY, HONDA CRF250RALLY(S), HONDA CRF300L, HONDA CRF300L RALLY
To secure the foothold for Side Stand
The side stand of CRF250 has a small contact surface with the ground (normal size), so it was purchased to increase the ground contact surface.
Screw lock agent was used for the mounting screws to be safe.
The product is made by ZETA and is very well made in Parenthesis.
The overall STAND seems to have been lengthened by about 5mm in order to make it wear clogs, so the OEMSide Stand, which is a drawback of CRF250, is long! Therefore, the demerit of CRF250, "OEMSide Stand is too long", became even worse.
If you do not consider the slope of where to stop with the Pannier case, you will need to be very careful where to stop in order for the Motorcycle to stand upright.
Not that this product is bad, but the company's Aluminum Stand might have been better for the above reasons.
View detail
Fits: HONDA CRF1100L AfricaTwin AdventureSports, HONDA CRF1100L AfricaTwin AdventureSports, HONDA CRF1100L AfricaTwin AdventureSports, HONDA CRF1100L AfricaTwin, HONDA CRF1100L AfricaTwin, HONDA CRF1100L AfricaTwin AdventureSports, HONDA CRF1100L AfricaTwin, HONDA CRF1100L AfricaTwin AdventureSports
Almost Essential Parts
Standard Spec. is too large to cause the body to lean too much when STAND is applied.
It is much easier to get rid of clogs here.
The quality of the product is good, and it can be installed immediately with only a screw lock and simple tools, so it is a good idea to have these available when purchasing the car body.
View detail
Fits: HARLEY-DAVIDSON SPORTSTER, HARLEY-DAVIDSON XL1200C, HARLEY-DAVIDSON XL1200T, HARLEY-DAVIDSON XL883L, HARLEY-DAVIDSON XL883R, HARLEY-DAVIDSON XL1200V, HARLEY-DAVIDSON XL1200CB, HARLEY-DAVIDSON XL883N, HARLEY-DAVIDSON XL1200CA, HARLEY-DAVIDSON XL1200C(110thAnv), HARLEY-DAVIDSON XL883R, HARLEY-DAVIDSON XL1200C, HARLEY-DAVIDSON XL1200X, HARLEY-DAVIDSON XL1200X, HARLEY-DAVIDSON XL1200C, HARLEY-DAVIDSON XL1200NS, HARLEY-DAVIDSON XL883N, HARLEY-DAVIDSON XL1200R, HARLEY-DAVIDSON XL883L, HARLEY-DAVIDSON XL1200C
It is an essential item.
It seems a bit expensive, but the texture is good and STAND is very easy to produce.
I wish I had put it on sooner.
It is difficult to work alone because the Screw must be tightened with the STAND stowed.
View detail
ZETA Side StandExtender
The price is a little high, but it is easy to install because all you have to do is insert the bolt and tighten the bolt. The ground contact area of the STAND has been widened, so I think it is more stable in places with poor footing, etc. View detail