Reviews
Fits: KAWASAKI ZEPHYR1100, KAWASAKI ZEPHYR1100RS, KAWASAKI GPZ900R, KAWASAKI W800, KAWASAKI W800STREET, KAWASAKI ZEPHYR750, KAWASAKI ZEPHYR750RS, KAWASAKI ZRX, KAWASAKI ZRX-2
For installation of Grip heater on GPX750R.
The OEM throttle pipe with many ribs had to have the ribs cut off in order to install the grip heater, which is a large amount of work, so I was not sure if it would fit. The part numbers of the wire and switch box are the same, and only the Throttle pipe part number has changed, so I bought it assuming that if the part numbers of the wire and switch box are the same, it would physically arrive.
The result is satisfactory for pontoon use.
View detail
I have more space.
It rained today, so I couldn't ride my bike, so I had to put parts on it.
I've heard from a lot of people that the CB250R has a wide steering wheel and that it doesn't feel right.
I had purchased a steering wheel and this Kit, just in case.
My impression when I rode the car in normal condition was ・・・・, well, it's just normal lol.
Since I bought it, I thought I'd install it.
The work itself is super easy.
The position is only 2 cm up, but it's easy.
I wonder if I'll ever use the Handlebar I bought.
However, I still felt that the Handlebar was somewhat removed from the aggressive style by the increase.
Well, I'm your uncle now, so I'd prefer it be easy.
I think I'm going to try riding around in this for a bit.
View detail
Fits: HONDA CT125, HONDA GB350, HONDA GB350S, HONDA CB400 SUPER FOUR, HONDA CB1100, HONDA CB1100RS, HONDA CB1100EX, HONDA CB1300 SUPER FOUR, SUZUKI V-STROM 250, SUZUKI SV650, SUZUKI SV650X
It is easy to install. (by SuKill) Firmly equipped
Installed on CT125CT110 HUNTER CUB.
I had a hard time pulling out the OEMBar End, though,
The stability of the installation is perfect and satisfactory.
If Protector is also equipped separately, it can be used in a reasonable way.
Windshield effect is also obtained, and customization is also possible.
The high price is also a Point.
Universal Type for other car models
So I want to use it for other Motorcycle.
View detail
Fits: YAMAHA NMAX155, YAMAHA NMAX125, YAMAHA NMAX150, YAMAHA NMAX155, YAMAHA FORCE155, YAMAHA SMAX, YAMAHA MAJESTYS, YAMAHA NMAX125, SUZUKI ADDRESSV125, SUZUKI ADDRESS V100
Unfortunately, it didn't fit.
I purchased this product as a BirdCity155 compatible product, but it was necessary to modify the product in order to install the Left Side.
Unfortunately, we had to deal with a return, but the response was excellent.
View detail
Ease of use and customization
Installed on CT125CT110 HUNTER CUB.
The windshield effect is about as good as it gets.
Satisfied as it is.
By being more transparent than it is.
Good for painting and personalizing.
The price is low and I am a beginner in painting.
I am glad I was able to Challenge without fear.
BlackPlain's for SONICHand guard
BlackPlain because there is no Protector.
Painted and in use
You should all try this as an introduction to painting.
View detail
Fits: HONDA CL250, HONDA CB250F, HONDA CB250R, HONDA CBR250R, HONDA CB125R, HONDA MONKEY125, HONDA glom
It's comfortable
The feel of operation is very good compared to the genuine or Alibalever bar. Adjusting the clutch cable after installation is essential. It is highly recommended for those who have small hands or have difficulty using the genuine lever. The build quality is also excellent, providing a fitting feeling similar to a genuine low-quality product. As expected, it's the Kitako lever of faith. It's good ------------------------------------------ ---------------- The feel of operation is very good compared to the genuine or Alibalever bar. Adjusting the clutch cable after installation is essential. It is highly recommended for those who have small hands or have difficulty using the genuine lever. The build quality is also excellent, providing a fitting feeling similar to a genuine low-quality product. As expected, it's the Kitako lever of faith. Good. Powered by Google Translator View detail
Fits: HONDA CB400 FOUR(Air cooled), HONDA CB400 FOUR(Air cooled), HONDA CB400 FOUR(Air cooled), HONDA CB400 FOUR(Air cooled)
Not hitting Tank.
I was wondering if I should buy the Steering Damper, but I am glad I did so at a reasonable price. View detail
Fits: BMW F900R, BMW R 1250 R, BMW R1200R, BMW R1250R, BMW S1000 XR, BMW S1000R
Personally, I'd say.
It is smaller than the OEM size, so we do not recommend it to those who do not like it. View detail
Easier to see than expected
The quality is very good. The rear view is better than I expected because it can be mounted on the side, and the bar end mirror does not rotate loosely or shake with vibration as is common with bar end mirrors.
If the price were a little lower, I would have nothing to say.
View detail
Fits: SUZUKI GSX-S1000, YAMAHA YZF-R6, YAMAHA YZF-R1S, YAMAHA YZF-R1, KAWASAKI Ninja ZX-6R, BMW S1000RR, BMW S1000R, KAWASAKI Ninja ZX-4R RR, KAWASAKI Ninja ZX-4R SE, SUZUKI GSX-S1000GT, KAWASAKI Z650RS, KAWASAKI Ninja ZX-25R, SUZUKI GSX-R1000R, YAMAHA YZF-R1M, SUZUKI GSX-S1000F, SUZUKI GSX-R750, SUZUKI GSX-R600, SUZUKI GSX-R1000, SUZUKI KATANA
One point
I installed it at the One Point around the Handlebar which was refreshed after the Separate handle was installed. I am very satisfied with it because it is a place that can be easily seen by driving medium eyes. View detail
Fits: HARLEY-DAVIDSON V-RODFamily, HARLEY-DAVIDSON TOURINGFamily, HARLEY-DAVIDSON SPORTSTERFamily, HARLEY-DAVIDSON SOFTAILFamily, HARLEY-DAVIDSON DYNAFamily
Buckhorn Handlebars
Great product with good workmanship. Bought the dent bar.Have to drill holes for internal wiring when installing the handlebars and does not need to extend the cables from my previous bar. View detail
Good position
I came across this product after doing a lot of research on the height and width of the Japanese Vehicle Inspection Correspondence on the CB750rc42.
The width is the same and the height is about 35mm higher than the other two, so I asked the shop that installed it to check if they had done the same thing and since it was compliant, they installed it without refusal.
Extension Harness was also prepared in case, but it was used only for Blinker switchWiring extension.
For this level of uplift, it would have been more cost-effective to just extend the Blinker switchWiring than to purchase Extension Harness.
The position is only 35mm up, but it feels much higher, and the handlebar feels a little tighter in the front, so it is very easy to drive.
It is as easy as if it were a learner's car, but the system is also very windy as it approaches vertical.
I am self-satisfied, but it was a good decision to replace it because it is totally easy to drive and maintain a non-fatiguing position.
View detail
bremboBrake lever
Installed on Ducati 400SS.
Since only one of them was BlackLever, I was satisfied with the uniformity.
It was easy to install
View detail
Fits: BMW RnineT, BMW RnineT, BMW K1600 Grand America, BMW K1600B, BMW K1600B, BMW RnineT /5, BMW RnineT Pure, BMW RnineT Scrambler, BMW RnineT Urban G/S
RnineTPosition improvement
Slightly improve Position.
The only thing I was concerned about was the width of the handlebar, so I decided to replace the handlebar to make it even more effective.
View detail
RnineTHandlebar replacement
We chose Silver because we wanted the same color as the OEM.
Position has become easier and more enjoyable to ride.
View detail
Fits: HONDA CB400SF, HONDA CB400SF VTEC, HONDA CB400SUPER BOLDOR, HONDA CB400SF VTEC Revo, HONDA CB400SUPER BOLDOR
I was planning to tour at high speed, so I was hoping for a Handlebar shake effect.
I purchased this product because it was said to be compatible with my car model and year, but the included screws were too short and could not be installed.
Furthermore, upon closer inspection, there were also scratches.
It is a pity that the price was so high.
View detail
Fits: KAWASAKI ZRX1200, KAWASAKI ZR-7S, KAWASAKI ZR-7, KAWASAKI Z750S, KAWASAKI Z1000, KAWASAKI ER-6n, KAWASAKI ER-5, HONDA CBR650RA, KAWASAKI Versys 650, KAWASAKI Ninja ZX-6RR, KAWASAKI Ninja ZX-6R, KAWASAKI Ninja ZX-14R, KAWASAKI Ninja ZX-14, YAMAHA FZR6, YAMAHA FZ6R, YAMAHA FZ6, YAMAHA FZ10, YAMAHA FZ09, KAWASAKI Tengai, KAWASAKI ZRX1200 DAEG
Appearance Refreshing
It's warm and looks simple, so it's great. View detail
Handlebar adjustment
To begin with, I have a ZETAHandlebar for my CT110 HUNTER CUB. I wanted to make it a little bit closer, so I bought it for HandlebarUp. At first I thought about using Spacer, but they didn't have it in Black, so I went with this one. It was not difficult to install, but the cable was at the limit, so I had to change the handlebar. 1.9cm up, but it looks pretty good. I added Brace to make it more rigid, and it was just right. View detail
Super lightweight bar ends!
If you want to reduce your bike's weight then this bar ends from CF POSH are the best! They weight just an amazing 17 grams for the pair! The quality and price are also very good. Definitely a good buy! View detail
Simple and lightweight bar ends for a street or racing bike
These bar ends from CF POSH have a metal insert that makes them a little heavier than their other model without the insert, but on the plus side these do dampen a little more the vibrations on the handlebar. A good option if you want to reduce your bike's weight. They weight just 42 grams for the pair! The quality is also very good for the price. View detail