Reviews
Restrictor low noises are the parts at the lower left of a photograph. After purchasing barrel 4 silencer, it got to know that this silencer is explosive sound roaring in a net. Since trouble could not be made to you in the neighborhood, this rest
Restrictor low noises are the parts at the lower left of a photograph.
After purchasing barrel 4 silencer, it got to know that this silencer is explosive sound roaring in a net.
Since trouble could not be made to you in the neighborhood, this restrictor low noise was also purchased.
Attachment removes three hexagon head bolts which are fixing the parts at the tip of a silencer first.
Next, although the normal parts exchanged for a restrictor low noise are drawn out, parts are drawn out, removing a gasket by a slotted screwdriver, since it is being fixed by the liquid gasket.
The rest sets a restrictor low noise and is only fixing with a bolt.
Product number which sells recommendation also by Webike: They are 40621 permatexes. Probably, it is good to plaster a restrictor low noise with a high-heat-resistance silicon gasket, and to fix.
It can be used also for the exhaust leakage stop at the time of muffler exchange.
View detail
Since the sound deadening effect was unsatisfactory, the medium size of W wall purchases. Since it was simply completed when wearing had pliers, but it was a type fixed by four long nails, uneasiness remained in the holding force a little, but it was
Since the sound deadening effect was unsatisfactory, the medium size of W wall purchases.
Since it was simply completed when wearing had pliers, but it was a type fixed by four long nails, uneasiness remained in the holding force a little, but it was OK when attached.
An important silence condition is touch that at least 2% of the sound deadening effect has been improved to about 5% by attachment use only the inner baffle.
By reference.
View detail
It was used for the straight pipe of the steed 400. The touch which became small [ about 1/3 ] carries out sound volume. I think that it is a thing more than a price since structure is also solid.
It was used for the straight pipe of the steed 400.
The touch which became small [ about 1/3 ] carries out sound volume.
I think that it is a thing more than a price since structure is also solid.
View detail
It was used only from the inner baffle, having wanted to stop to a slight degree. wearing -- its wastepaper -- since it does not riot in a silencer difficultly, it is used satisfactorily.
It was used only from the inner baffle, having wanted to stop to a slight degree.
wearing -- its wastepaper -- since it does not riot in a silencer difficultly, it is used satisfactorily.
View detail
A 200-mm type was attached to the CB1300SF2007 model. Although it was a purchase schedule of only an inner baffle, if the attitude of sound volume or torque changed further by this, he wanted to try very much and simultaneous purchase was carried out
A 200-mm type was attached to the CB1300SF2007 model.
Although it was a purchase schedule of only an inner baffle, if the attitude of sound volume or torque changed further by this, he wanted to try very much and simultaneous purchase was carried out at the beginning.
It was as easy as bending wearing on pliers, and work was about 30 minutes.
Although it was the comment which equipped and ran, sound volume fell and lower torque became thick.
On the contrary, the sound at the time of high rotation which barks became somewhat quiet.
Overall sound volume became external full exhaust at least to normal +alpha by inner baffle + attachment, and it became sound volume exactly good as itself.
Since the time of low rotation rides further easily as a result, it is continuing riding, attached now.
View detail
It attached to the CB1300SF2007 model. Since it had equipped with the full exhaust of the moriwaki, it was attached safely geometrically or was uneasy, but it has equipped perfectly by S wall type of medium size. Since there was sound volume consi
It attached to the CB1300SF2007 model.
Since it had equipped with the full exhaust of the moriwaki, it was attached safely geometrically or was uneasy, but it has equipped perfectly by S wall type of medium size.
Since there was sound volume considerably before attachment for full exhaust, although cared about the neighborhood, after inner baffle wearing falls in the sound volume like a slip-on, and needed to cease to use a nerve not much at early morning and midnight.
Moreover, tone quality did not change, either, but since the omission got somewhat bad and the torque of low rotation revived, it was very helpful.
a thing with this wonderful product that does not spoil appearance but can adjust sound volume and an omission -- it is a word.
View detail
Fits: KAWASAKI Z1 (900SUPER4), KAWASAKI Z2 (750RS/Z750FOUR)
It is used for 2-into-1 ProPipe of Vance&Hines for harleys by automobile inspection correspondence. Although it was the specification of 94db in the bore diameter 16 phi, the observations were 93db probably because it stuffed glass wool into the surro
It is used for 2-into-1 ProPipe of Vance&Hines for harleys by automobile inspection correspondence.
Although it was the specification of 94db in the bore diameter 16 phi, the observations were 93db probably because it stuffed glass wool into the surroundings.
Since the path is a little small, inner glass wool jumps out delicately.
(Seemingly, it came out recently ?) 64 phi may be a just fit.
View detail
Since tone quality's not having fallen unexpectedly and the attitude of torque were not pleasing although the inner silencer was purchased and attached the other day, this attachment was purchased to the trial. Since glass wool was planted also to att
Since tone quality's not having fallen unexpectedly and the attitude of torque were not pleasing although the inner silencer was purchased and attached the other day, this attachment was purchased to the trial.
Since glass wool was planted also to attachment, the type of the set from the first was another, and purchased, but since it is as good as the place with which it attached alone and sound volume fell, glass wool was not used.
If there is no extraordinarily difficult thing and there are pliers, it can equip with attachment.
Although it is the attitude of the torque in question, I can think that I became good exactly.
Although the portion of the pole low speed which it was satisfactory when turning, since there was displacement, but was worried was a few, torque up of it was carried out.
Although the part and high rotation are likely to be affected -- If it was 300 sizes although 200 sizes were used, sound volume falls more and possibly it also raised torque this time.
View detail
The peculiar tone quality of the end buffle was disagreeable, and it tried this. Since the exhaust pipes with which it has equipped had gathered by the limit, the single wall type with a short overall length was chosen. It is because a single wall
The peculiar tone quality of the end buffle was disagreeable, and it tried this.
Since the exhaust pipes with which it has equipped had gathered by the limit, the single wall type with a short overall length was chosen.
It is because a single wall's not having L size and S size had extracted the inside diameter, so they thought the small kana ? to 1200 cc although the size was M.
Thinking that a silencer was attached if compelled although he asked how many sound volume fall without a silencer, in reliance, sound volume did not fall.
But since it comes out as it is and sound volume falls not a little, tone quality is recommended in the direction which cares about the neighborhood.
Is [ seemingly have merely obtained the patent and / the baffle of others / price ] a difficulty high?
If cheap to a slight degree, it sells and that is right. -- It is said that it will mourn over sound insulation fairly a little early although the talk was able to be heard also from it and those that actually use.
Early check seems to be good although based also on distance.
If it is this type, after it is not difficult to plant glass wool by oneself, either.
View detail
Although attached to moriwaki titanium by CBX750, sound volume did not consider, as it changed. as [ decreased in number / the pompons at the time of a slowdown / for a while ] . . A price is past quantity anyhow.
Although attached to moriwaki titanium by CBX750, sound volume did not consider, as it changed.
as [ decreased in number / the pompons at the time of a slowdown / for a while ]
.
.
A price is past quantity anyhow.
View detail
Although the omission was good although mufflers were exchanged, and the pickup was good, since the opposite side exhaust sound was louder than anticipation, this product was purchased for silence. an exhaust sound turns into sound which low-pitched s
Although the omission was good although mufflers were exchanged, and the pickup was good, since the opposite side exhaust sound was louder than anticipation, this product was purchased for silence.
an exhaust sound turns into sound which low-pitched sound extracted from a shrill sound -- about 30 km, after the run, when removed, glass fiber (sound insulation) was turned up.
When attaching, this [ wire ] was twisted and it fixed.
Sound insulation can twist sound volume and it can adjust it in quantity.
The nail was extended and attached to the pipe internal diameter of 52 mm,
View detail
Fits: KAWASAKI Z1 (900SUPER4), KAWASAKI Z2 (750RS/Z750FOUR)
the yoshimura type silencer was damaged -- a sake -- purchase! Sound is also touch good in strong structure! those without wool -- chatter sound (Pippi sound) sounds. He enjoys the difference in sound, etc. by processing many things, although he likes
the yoshimura type silencer was damaged -- a sake -- purchase! Sound is also touch good in strong structure! those without wool -- chatter sound (Pippi sound) sounds.
He enjoys the difference in sound, etc. by processing many things, although he likes those with wool.
View detail
It changed from the silent inner silencer. It seems that it is bad just for a moment although sound changed to a good sound of low-pitched sound. [ of an omission ] When processing the punching metal which has closed the pipe, sound and an omissio
It changed from the silent inner silencer.
It seems that it is bad just for a moment although sound changed to a good sound of low-pitched sound. [ of an omission ]
When processing the punching metal which has closed the pipe, sound and an omission also became good.
View detail
It seems that exhaust efficiency falls victim also DR-Z400SM although it seems that others are also contributed. Although it turned to 10500 rotations before wearing, it turns around after wearing only to 9000 rotations. It was the result of this
It seems that exhaust efficiency falls victim also DR-Z400SM although it seems that others are also contributed.
Although it turned to 10500 rotations before wearing, it turns around after wearing only to 9000 rotations.
It was the result of this although carburetor setting was suspected at first.
It is better to remove to run pleasantly after all.
View detail
Tone quality is the touch in which it does not change to but only the noise disappeared. The appearance of a silencer exit is not changed, either, but silence and exhaust pressure are also stopped, and it is dramatically good. Since the price is h
Tone quality is the touch in which it does not change to but only the noise disappeared.
The appearance of a silencer exit is not changed, either, but silence and exhaust pressure are also stopped, and it is dramatically good.
Since the price is high, it is this evaluation w.
View detail
Although it was used for wr250r, exhaust pressure's starting [ a relation or ] worsened.
Although it was used for wr250r, exhaust pressure's starting [ a relation or ] worsened. View detail
Nojima Lock-on The full exhaust muffler was equipped. Although it was attached to this muffler from the first, since it was lost when he noticed [ whether whose bundle of the bolt was loose, and ], it purchased. It is preeminent for a sound deaden
Nojima Lock-on The full exhaust muffler was equipped.
Although it was attached to this muffler from the first, since it was lost when he noticed [ whether whose bundle of the bolt was loose, and ], it purchased.
It is preeminent for a sound deadening effect, and is CBR600 F-6750 rotation, and 104db turned into 94db.
It passed also along the automobile inspection simply.
View detail
It expected that low-speed revival was a higher sound deadening effect, and the request for proposal of the long type was carried out, and it was purchased. Attachment: Overly easy. After extracting a silencer and inserting this in an exhaust pipe
It expected that low-speed revival was a higher sound deadening effect, and the request for proposal of the long type was carried out, and it was purchased.
Attachment: Overly easy.
After extracting a silencer and inserting this in an exhaust pipe, a silencer is only returned.
Sound deadening effect: Although it is touch that sound is not small so much, at the time of low rotation, the sound deadening effect at the time of high rotation is quite good.
Tone quality is touch that the exhaust sound was settled finely and low-pitched sound was emphasized.
Low speed: Although the silencer of the straight configuration was attached, the low speed has been improved considerably.
a high rotation area is also satisfactory at all -- it is .
Price: Or [ selling more, when cheap to a slight degree ] -- It is better for a cautions:long type to check the inside diameter of a silencer to see a retreat zone goes into a silencer perfectly.
View detail
It is wearing to a nojima slip-on. There is only the same manufacturer and there are almost no GATA and clearance at the time of wearing. It seems that it is OK even when he has no tool, if only the inside of warmth is attached although bound tigh
It is wearing to a nojima slip-on.
There is only the same manufacturer and there are almost no GATA and clearance at the time of wearing.
It seems that it is OK even when he has no tool, if only the inside of warmth is attached although bound tight with a hexagon cap and a spring washer at the time of attachment.
Rather than the time [ the sound under idling ] without a baffle, low-pitched sound is cut, there are no chatters, such as a nearby windowpane, and it is a grade which whether having covered the helmet melts hears with the sound under run being pure so that may be the sound volume like middle without a baffle.
It seems that it is working with the kitchen although it is small.
Even if it is strong also for rusting by the product made from a stainless and sees alone, it is simple, but the care of structure and a manufacturer's serious posture are felt, and a favorable impression is welcomed dramatically.
Therefore, 笙ｪ made into *5 Thu
View detail
It is the optimal inner baffle for silence of an explosive-sound-roaring muffler. Firm structure -- sizing is also abundant, play and the clip of a stop is attached -- is the feature. In my case, although considered as 3~8% of silence by medium si
It is the optimal inner baffle for silence of an explosive-sound-roaring muffler.
Firm structure -- sizing is also abundant, play and the clip of a stop is attached -- is the feature.
In my case, although considered as 3~8% of silence by medium size, it was about 5%.
Appearance change is absolutely none, a common feeling of an omission omission is also canceled by the explosive-sound-roaring muffler, and a feeling is very best.
However, since it can be called nothing but a drop in the bucket -- even if it attaches to the muffler exceeding 100db, I think individually that the combination medium size -- will be the best in the thing in the second half of 90db.
View detail